In-situ wrapping of tin oxide nanoparticles by bacterial cellulose derived carbon nanofibers and its application as freestanding interlayer in lithium sulfide based lithium-sulfur batteries.

Lithium-Sulfur (Li-S) batteries are mostly known for their high energy density and cost-effectiveness. However, their intrinsic problems hinder their implementation into the marketplace. The most pronounced problems are the parasitic reactions which occur between lithium polysulfides species and lithium metal anode, the volume expansion of sulfur (80%) at the end of discharge and the safety issues which are linked with the use of lithium metal. Herein this work, two approaches are applied to prevent these effects; one approach is the use of Li2S as cathode material, instead of starting from sulfur powder, both to circumvent the volume expansion of sulfur taking place during discharge and to enable lithium-free anodes cell assembling (i.e. Si-Li2S or Sn-Li2S cell configurations). Second approach deals with the lithium anode protection by SnO2 containing freestanding pyrolyzed bacterial cellulose interlayers located between anode and cathode electrodes. Since bacterial celluloses are formed in the presence of SnO2 nanoparticles, the resulting structure enables intimate contact between carbon and SnO2 nanoparticles. By employing Li2S cathode and freestanding interlayer concurrently, 468 mAh g-1 discharge capacity is obtained at C/10 current density over 100 cycles.