| Literature DB >> 29909772 |
Sowmya Balasubramanian1,2, David M Harrild3,4, Basavaraj Kerur3, Edward Marcus3,4, Pedro Del Nido5,6, Tal Geva3,4, Andrew J Powell3,4.
Abstract
BACKGROUND: In patients with repaired tetralogy of Fallot (TOF), a better understanding of the impact of surgical pulmonary valve replacement (PVR) on ventricular mechanics may lead to improved indications and outcomes. Therefore, we used cardiovascular magnetic resonance (CMR) feature tracking analysis to quantify ventricular strain and synchrony in repaired TOF patients before and after PVR.Entities:
Keywords: Feature tracking; Myocardial strain; Pulmonary valve replacement; Tetralogy of fallot; Ventricular synchrony
Mesh:
Year: 2018 PMID: 29909772 PMCID: PMC6004693 DOI: 10.1186/s12968-018-0460-0
Source DB: PubMed Journal: J Cardiovasc Magn Reson ISSN: 1097-6647 Impact factor: 5.364
Fig. 1Schematic diagram illustrating the division of the right ventricle (RV) and left ventricle (LV) myocardium into segments on short-axis (a) and 4-chamber views (b)
Patient characteristics (n = 36)
| Male | 23 (64%) |
| Prior aortopulmonary shunt | 10 (28%) |
| Age at initial complete repair (years) | 1.5 (0.0–19.4) |
| Age at PVR (years) | 22.4 (12.3–57.7) |
| Cardiac symptoms prior to PVR | 21 (58%) |
| NYHA Class I or II prior to PVR | 33 (92%) |
| NYHA Class III or IV prior to PVR | 3 (8%) |
| Prescribed cardiac medications prior to PVR | 16 (44%) |
| Additional procedures with PVR | |
| Closure of patent foramen ovale or atrial septal defect | 8 (22%) |
| Pulmonary artery plasty | 10 (28%) |
| Tricuspid annuloplasty | 6 (17%) |
| Cryoablation | 2 (6%) |
| Maze procedure | 4 (11%) |
| Closure of ventricular septal defect | 3 (8%) |
| Other | 4 (11%) |
Data presented as n (%) or median (range)
PVR pulmonary valve replacement
Diagnostic testing results pre- and post-PVR (n = 36)
| Parameter | Pre-PVR | Post-PVR | |
|---|---|---|---|
| Electrocardiogram | |||
| QRS duration (ms) | 153 ± 38 | 152 ± 39 | 0.99 |
| Exercise Testing | |||
| Peak VO2 (ml/kg/min) | 26 ± 9 | 25 ± 8 | 0.31 |
| Echocardiography | |||
| ≤ Mild tricuspid regurgitation | 33 | 35 | |
| ≥ Moderate tricuspid regurgitation | 3 | 1 | |
| RV systolic pressure by tricuspid regurgitation jet velocity | 35 ± 15 | 25 ± 7 | 0.009 |
| CMR | |||
| Heart rate | 75 ± 11 | 73 ± 13 | 0.38 |
| LV EDVi (ml/m2) | 88 ± 17 | 93 ± 17 | 0.01 |
| LV ESVi (ml/m2) | 37 ± 10 | 40 ± 12 | 0.02 |
| LV ejection fraction (%) | 58 ± 8 | 57 ± 7 | 0.35 |
| RV EDVi (ml/m2) | 194 ± 34 | 119 ± 16 | < 0.001 |
| RV ESVi (ml/m2) | 100 ± 24 | 65 ± 16 | < 0.001 |
| RV ejection fraction (%) | 49 ± 7 | 46 ± 7 | 0.02 |
| Pulmonary regurgitation fraction (%) | 48 ± 10 | 4 ± 5 | < 0.0001 |
EDV end-diastolic volume, ESV end-systolic volume, LV left ventricular, PVR pulmonary valve replacement, RV right ventricular
Fig. 2Global longitudinal and circumferential strain in the LV (a) and RV (b) pre- and post-pulmonic valve replacement (PVR). An asterisk (*) indicates a statistically significant change. LV – left ventricle, RV – right ventricle, PVR – pulmonary valve replacement
Fig. 3Segmental longitudinal and circumferential strain in the LV (a) and RV (b) pre- and post-PVR. An asterisk (*) indicates a statistically significant change. LV – left ventricle, RV – right ventricle, PVR – pulmonary valve replacement
Synchrony parameters pre- and post-PVR (n = 36)
| Parameter | Pre-PVR | Post-PVR | |
|---|---|---|---|
| Left ventricle | |||
| Longitudinal strain | |||
| Maximum difference in time-to-peak | 315 ± 185 | 351 ± 196 | 0.33 |
| Standard deviation of time-to-peak | 121 ± 73 | 139 ± 82 | 0.23 |
| Cross-correlation delay | 301 ± 218 | 340 ± 242 | 0.39 |
| Circumferential strain: base | |||
| Maximum difference in time-to-peak | 233 ± 172 | 151 ± 120 | 0.01 |
| Standard deviation of time-to-peak | 89 ± 63 | 58 ± 48 | 0.02 |
| Cross-correlation delay | 217 ± 182 | 107 ± 77 | 0.0001 |
| Circumferential strain: mid | |||
| Maximum difference in time-to-peak | 124 ± 75 | 107 ± 55 | 0.02 |
| Standard deviation of time-to-peak | 49 ± 27 | 43 ± 20 | 0.15 |
| Cross-correlation delay | 106 ± 113 | 77 ± 53 | 0.13 |
| Circumferential strain: apex | |||
| Maximum difference in time-to-peak | 58 ± 46 | 47 ± 44 | 0.27 |
| Standard deviation of time-to-peak | 28 ± 22 | 23 ± 21 | 0.26 |
| Cross-correlation delay | 99 ± 146 | 42 ± 24 | 0.04 |
| Right ventricle | |||
| Longitudinal strain | |||
| Maximum difference in time-to-peak | 249 ± 176 | 337 ± 170 | 0.02 |
| Standard deviation of time-to-peak | 97 ± 70 | 128 ± 64 | 0.02 |
| Cross-correlation delay | 258 ± 171 | 254 ± 179 | 0.91 |
| Circumferential strain: base | |||
| Maximum difference in time-to-peak | 361 ± 198 | 265 ± 155 | 0.01 |
| Standard deviation of time-to-peak | 136 ± 70 | 99 ± 59 | 0.004 |
| Cross-correlation delay | 342 ± 285 | 341 ± 286 | 0.56 |
| Circumferential strain: mid | |||
| Maximum difference in time-to-peak | 214 ± 133 | 268 ± 179 | 0.11 |
| Standard deviation of time-to-peak | 96 ± 55 | 101 ± 66 | 0.73 |
| Cross-correlation delay | 268 ± 216 | 263 ± 224 | 0.93 |
| Circumferential strain: apex | |||
| Maximum difference in time-to-peak | 95 ± 84 | 129 ± 97 | 0.047 |
| Standard deviation of time-to-peak | 43 ± 37 | 60 ± 43 | 0.03 |
| Cross-correlation delay | 119 ± 148 | 126 ± 145 | 0.82 |
Values expressed as mean ± standard deviation in ms
Fig. 4Segmental time-to-peak longitudinal and circumferential strain in the LV (a) and RV (b) pre- and post-PVR. An asterisk (*) indicates a statistically significant change. LV – left ventricle, RV – right ventricle, PVR – pulmonary valve replacement
Interobserver and intraobserver variability for global strain and synchrony parameters
| Parameter | Intraobserver ( | Interobserver ( | ||
|---|---|---|---|---|
| Mean difference ± SD | ICC | Mean difference ± SD | ICC | |
| Left ventricle | ||||
| Circumferential – mid | ||||
| Global strain (%) | 0.25 ± 1.3 | 0.96 | 0.30 ± 1.9 | 0.89 |
| Maximum difference T2P (ms) | 12.5 ± 27.8 | 0.86 | 1.0 ± 38.5 | 0.82 |
| Cross-correlation delay (ms) | 2.8 ± 21.9 | 0.83 | 14.6 ± 31.4 | 0.62 |
| Longitudinal | ||||
| Global strain (%) | 0.33 ± 2.1 | 0.93 | 1.6 ± 3.7 | 0.75 |
| Maximum difference T2P (ms) | 102.3 ± 145 | 0.80 | 40.0 ± 154 | 0.67 |
| Cross-correlation delay (ms) | 25.0 ± 80.7 | 0.73 | 45.8 ± 107 | 0.65 |
| Right ventricle | ||||
| Circumferential – mid | ||||
| Global strain (%) | 0.40 ± 1.6 | 0.95 | 0.31 ± 2.0 | 0.88 |
| Maximum difference T2P (ms) | 64.0 ± 126 | 0.82 | 90.6 ± 107.9 | 0.61 |
| Cross-correlation delay (ms) | 104 ± 233 | 0.66 | 93.0 ± 230 | 0.59 |
| Longitudinal | ||||
| Global strain (%) | 1.0 ± 2.8 | 0.85 | 2.6 ± 2.2 | 0.76 |
| Maximum difference T2P (ms) | 146 ± 133 | 0.76 | 157 ± 158 | 0.66 |
| Cross-correlation delay (ms) | 22.4 ± 85.9 | 0.64 | 42.1 ± 118 | 0.53 |
ICC intraclass correlation coefficient, T2P time-to-peak, SD standard deviation