Accelerating settling rates of biosolids lagoons through thermal hydrolysis.

Although the improved dewaterability and digestibility of primary biosolids subjected to thermal hydrolysis has been studied for decades, there are a surprisingly small number of studies exploring the use of this thermal treatment for digested biosolids that are typically left to settle in large settling lagoons. This is likely because of the high capital and operating costs associated with thermal hydrolysis, coupled with the limited applications and value of the resulting products. However, due to the anticipated increases in the amount of generated biosolids combined with issues surrounding potential environmental release and the limited availability of land for additional lagoons, other biosolids management strategies are being explored. Here, we show that thermal hydrolysis at 280 °C for 1 h resulted in 78.2 ± 0.8% settling after 2 h. Furthermore, addition of phosphoric acid to lower the pH of the hydrolysate to pH 3 resulted in increased settling rates, but the final volume of unsettled material after 2 h was statistically similar to the thermally hydrolyzed material without pH adjustment (75.7 ± 2.3%). Remarkably, when the pH of the digested biosolids was adjusted to 3 prior to thermal hydrolysis, a settling rate of 87.3 ± 1.1% was observed after just 15 min. Significantly, the dewaterability of thermally hydrolyzed biosolids was measured in our experiments through natural settling, without the use of external mechanics. Taken together, the data presented in this paper demonstrate that high temperature thermal hydrolysis is a promising method for accelerating the settling rates of digested biosolids and may represent a viable alternative to building and maintaining biosolids lagoons.