Literature DB >> 29778831

Black plastics: Linear and circular economies, hazardous additives and marine pollution.

Andrew Turner1.   

Abstract

Black products constitute about 15% of the domestic plastic waste stream, of which the majority is single-use packaging and trays for food. This material is not, however, readily recycled owing to the low sensitivity of black pigments to near infrared radiation used in conventional plastic sorting facilities. Accordingly, there is mounting evidence that the demand for black plastics in consumer products is partly met by sourcing material from the plastic housings of end-of-life waste electronic and electrical equipment (WEEE). Inefficiently sorted WEEE plastic has the potential to introduce restricted and hazardous substances into the recyclate, including brominated flame retardants (BFRs), Sb, a flame retardant synergist, and the heavy metals, Cd, Cr, Hg and Pb. The current paper examines the life cycles of single-use black food packaging and black plastic WEEE in the context of current international regulations and directives and best practices for sorting, disposal and recycling. The discussion is supported by published and unpublished measurements of restricted substances (including Br as a proxy for BFRs) in food packaging, EEE plastic goods and non-EEE plastic products. Specifically, measurements confirm the linear economy of plastic food packaging and demonstrate a complex quasi-circular economy for WEEE plastic that results in significant and widespread contamination of black consumer goods ranging from thermos cups and cutlery to tool handles and grips, and from toys and games to spectacle frames and jewellery. The environmental impacts and human exposure routes arising from WEEE plastic recycling and contamination of consumer goods are described, including those associated with marine pollution. Regarding the latter, a compilation of elemental data on black plastic litter collected from beaches of southwest England reveals a similar chemical signature to that of contaminated consumer goods and blended plastic WEEE recyclate, exemplifying the pervasiveness of the problem.
Copyright © 2018 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Black plastic; Brominated flame retardants; Food packaging; Heavy metals; Recycling; Waste electrical and electronic equipment

Mesh:

Substances:

Year:  2018        PMID: 29778831     DOI: 10.1016/j.envint.2018.04.036

Source DB:  PubMed          Journal:  Environ Int        ISSN: 0160-4120            Impact factor:   9.621


  7 in total

Review 1.  A review of the success and challenges in characterizing human dermal exposure to flame retardants.

Authors:  Enzo Zini Moreira Silva; Daniel Junqueira Dorta; Danielle Palma de Oliveira; Daniela Morais Leme
Journal:  Arch Toxicol       Date:  2021-08-26       Impact factor: 5.153

2.  Large-Format Additive Manufacturing and Machining Using High-Melt-Temperature Polymers. Part II: Characterization of Particles and Gases.

Authors:  Aleksandr B Stefaniak; Lauren N Bowers; Stephen B Martin; Duane R Hammond; Jason E Ham; J R Wells; Alyson R Fortner; Alycia K Knepp; Sonette du Preez; Jack R Pretty; Jennifer L Roberts; Johan L du Plessis; Austin Schmidt; Matthew G Duling; Andrew Bader; M Abbas Virji
Journal:  J Chem Health Saf       Date:  2021-03-25

3.  Chemical Characterization of Recycled Consumer Products Using Suspect Screening Analysis.

Authors:  Charles N Lowe; Katherine A Phillips; Kristin A Favela; Alice Y Yau; John F Wambaugh; Jon R Sobus; Antony J Williams; Ashley J Pfirrman; Kristin K Isaacs
Journal:  Environ Sci Technol       Date:  2021-08-04       Impact factor: 11.357

Review 4.  Sampling Scheme Conception for Pretreated Polyolefin Waste Based on a Review of the Available Standard Procedures.

Authors:  Mohamad Hassan Akhras; Joerg Fischer
Journal:  Polymers (Basel)       Date:  2022-08-24       Impact factor: 4.967

Review 5.  Bibliographic mapping of post-consumer plastic waste based on hierarchical circular principles across the system perspective.

Authors:  Dania Sitadewi; Gatot Yudoko; Liane Okdinawati
Journal:  Heliyon       Date:  2021-06-04

6.  Impact of PP Impurities on ABS Tensile Properties: Computational Mechanical Modelling Aspects.

Authors:  Charles Signoret; Anne-Sophie Caro-Bretelle; José-Marie Lopez-Cuesta; Patrick Ienny; Didier Perrin
Journal:  Polymers (Basel)       Date:  2021-05-19       Impact factor: 4.329

Review 7.  Recycling Plastics from WEEE: A Review of the Environmental and Human Health Challenges Associated with Brominated Flame Retardants.

Authors:  Cecilia Chaine; Andrew S Hursthouse; Bruce McLean; Iain McLellan; Brian McMahon; Jim McNulty; Jan Miller; Evi Viza
Journal:  Int J Environ Res Public Health       Date:  2022-01-11       Impact factor: 3.390

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.