Literature DB >> 29758884

The impact of urban open space and 'lift-up' building design on building intake fraction and daily pollutant exposure in idealized urban models.

Chenyuan Sha1, Xuemei Wang2, Yuanyuan Lin3, Yifan Fan4, Xi Chen1, Jian Hang5.   

Abstract

Sustainable urban design is an effective way to improve urban ventilation and reduce vehicular pollutant exposure to urban residents. This paper investigated the impacts of urban open space and 'lift-up' building design on vehicular CO (carbon monoxide) exposure in typical three-dimensional (3D) urban canopy layer (UCL) models under neutral atmospheric conditions. The building intake fraction (IF) represents the fraction of total vehicular pollutant emissions inhaled by residents when they stay at home. The building daily CO exposure (Et) means the extent of human beings' contact with CO within one day indoor at home. Computational fluid dynamics (CFD) simulations integrating with these two concepts were performed to solve turbulent flow and assess vehicular CO exposure to urban residents. CFD technique with the standard k-ε model was successfully validated by wind tunnel data. The initial numerical UCL model consists of 5-row and 5-column (5×5) cubic buildings (building height H=street width W=30m) with four approaching wind directions (θ=0°, 15°, 30°, 45°). In Group I, one of the 25 building models is removed to attain urban open space settings. In Group II, the first floor (Lift-up1), or second floor (Lift-up2), or third floor (Lift-up3) of all buildings is elevated respectively to create wind pathways through buildings. Compared to the initial case, urban open space can slightly or significantly reduce pollutant exposure for urban residents. As θ=30° and 45°, open space settings are more effective to reduce pollutant exposure than θ=0° and 15°.The pollutant dilution near or surrounding open space and in its adjacent downstream regions is usually enhanced. Lift-up1 and Lift-up2 experience much greater pollutant exposure reduction in all wind directions than Lift-up3 and open space. Although further investigations are still required to provide practical guidelines, this study is one of the first attempts for reducing urban pollutant exposure by improving urban design.
Copyright © 2018. Published by Elsevier B.V.

Entities:  

Keywords:  Building daily CO (carbon monoxide) exposure; Building intake fraction (IF); Computational fluid dynamic (CFD) simulations; Urban open space; ‘Lift-up’ building design

Year:  2018        PMID: 29758884     DOI: 10.1016/j.scitotenv.2018.03.194

Source DB:  PubMed          Journal:  Sci Total Environ        ISSN: 0048-9697            Impact factor:   7.963


  3 in total

Review 1.  Recent advances in modeling turbulent wind flow at pedestrian-level in the built environment.

Authors:  Jiading Zhong; Jianlin Liu; Yongling Zhao; Jianlei Niu; Jan Carmeliet
Journal:  Archit Intell       Date:  2022-07-18

2.  Public Art and Space Environment Design Using Genetic Algorithm-Guided 3D Virtual Reconstruction.

Authors:  Man Luo
Journal:  J Environ Public Health       Date:  2022-09-09

3.  Numerical Investigations of Urban Pollutant Dispersion and Building Intake Fraction with Various 3D Building Configurations and Tree Plantings.

Authors:  Qingman Li; Jie Liang; Qun Wang; Yuntong Chen; Hongyu Yang; Hong Ling; Zhiwen Luo; Jian Hang
Journal:  Int J Environ Res Public Health       Date:  2022-03-16       Impact factor: 3.390

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.