Literature DB >> 29757609

Permselective SPEEK/Nafion Composite-Coated Separator as a Potential Polysulfide Crossover Barrier Layer for Li-S Batteries.

Dasari Bosu Babu1,2, Krishnan Giribabu1, Kannadka Ramesha1,2.   

Abstract

Minimizing the shuttle effect by constraining polysulfides to the cathode compartment and activating the passive layer between cathode and separator are highly important for improving the Li-S cell performance, Coulombic efficiency, and cycle life. Here, we report a submicron thin coating of permselective sulfonated poly(ether ether ketone) (SPEEK) composite layer on the separator that would reduce polysulfide crossover, imparting a significant improvement in cycle life. It is observed that SPEEK increases the stability, and adding Nafion improves the capacity value. Among different ratios of Nafion and SPEEK (25:75, 50:50, and 75:25), the composite with a SPEEK/Nafion ratio of 50:50 showed a controlled shuttle effect with a stable cell capacity of 600 mA h g-1 up to 300 cycles. This modified separator with permselective coatings not only reduces the polysulfide shuttle but also improves the wettability and interfacial contact, which results in an improvement in average cell potential and lithium diffusivity. It is demonstrated here that the combination of functional (ionomer coating on separator) and nonfunctional (extra cathode layer) physical barriers effectively suppresses the polysulfide crossover and improves the electrochemical performance of Li-S batteries. The cell shows an initial capacity of 1300 mA h g-1 and a capacity retention of 650 mA h g-1 over 500 cycles with a 6 mg/cm2 sulfur loading.

Entities:  

Keywords:  CNT paper; Li−S battery; interlayer; physical barrier; polymer; separator

Year:  2018        PMID: 29757609     DOI: 10.1021/acsami.8b04888

Source DB:  PubMed          Journal:  ACS Appl Mater Interfaces        ISSN: 1944-8244            Impact factor:   9.229


  4 in total

1.  A rational design of the coupling mechanism of physical adsorption and chemical charge effect for high-performance lithium-sulfur batteries.

Authors:  Guilin Feng; Xiaohong Liu; Yasai Wang; Zhenguo Wu; Chen Wu; Rong Li; Yanxiao Chen; Xiaodong Guo; Benhe Zhong; Jianshu Li
Journal:  RSC Adv       Date:  2019-04-24       Impact factor: 4.036

2.  Aramid Fibers Modulated Polyethylene Separator as Efficient Polysulfide Barrier for High-Performance Lithium-Sulfur Batteries.

Authors:  Jifeng Gu; Jiaping Zhang; Yun Su; Xu Yu
Journal:  Nanomaterials (Basel)       Date:  2022-07-22       Impact factor: 5.719

3.  Improved performance of lithium-sulfur batteries by employing a sulfonated carbon nanoparticle-modified glass fiber separator.

Authors:  Srikanth Ponnada; Maryam Sadat Kiai; Demudu Babu Gorle; Annapurna Nowduri
Journal:  Nanoscale Adv       Date:  2021-06-11

Review 4.  A Review of the Application of Modified Separators in Inhibiting the "shuttle effect" of Lithium-Sulfur Batteries.

Authors:  Bo-Wen Zhang; Bo Sun; Pei Fu; Feng Liu; Chen Zhu; Bao-Ming Xu; Yong Pan; Chi Chen
Journal:  Membranes (Basel)       Date:  2022-08-17
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.