Literature DB >> 29745796

Mechanical properties of the airway tree: heterogeneous and anisotropic pseudoelastic and viscoelastic tissue responses.

Mona Eskandari1,2, Alberto L Arvayo2, Marc E Levenston2,3.   

Abstract

Airway obstruction and pulmonary mechanics remain understudied despite lung disease being the third cause of death in the United States. Lack of relevant data has led computational pulmonary models to infer mechanical properties from available material data for the trachea. Additionally, the time-dependent, viscoelastic behaviors of airways have been largely overlooked, despite their potential physiological relevance and utility as metrics of tissue remodeling and disease progression. Here, we address the clear need for airway-specific material characterization to inform biophysical studies of the bronchial tree. Specimens from three airway levels (trachea, large bronchi, and small bronchi) and two orientations (axial and circumferential) were prepared from five fresh pig lungs. Uniaxial tensile tests revealed substantial heterogeneity and anisotropy. Overall, the linear pseudoelastic modulus was significantly higher axially than circumferentially (30.5 ± 3.1 vs. 8.4 ± 1.1 kPa) and significantly higher among circumferential samples for small bronchi than for the trachea and large bronchi (12.5 ± 1.9 vs. 6.0 ± 0.6 and 6.6 ± 0.9 kPa). Circumferential samples exhibited greater percent stress relaxation over 300 s than their axial counterparts (38.0 ± 1.4 vs. 23.1 ± 1.5%). Axial and circumferential trachea samples displayed greater percent stress relaxation (26.4 ± 1.6 and 42.5 ± 1.7%) than corresponding large and small bronchi. This ex vivo pseudoelastic and viscoelastic characterization reveals novel anisotropic and heterogeneous behaviors and equips us to construct airway-specific constitutive relations. Our results establish necessary fundamentals for airway mechanics, laying the groundwork for future studies to extend to clinical questions surrounding lung injury, and further directly enables computational tools for lung disease obstruction predictions. NEW & NOTEWORTHY Understanding the mechanics of the lung is necessary for investigating disease progression. Trachea mechanics comprises the vast majority of ex vivo airway tissue characterization despite distal airways being the site of disease manifestation and occlusion. Furthermore, viscoelastic studies are scarce, whereas time-dependent behaviors could be potential physiological metrics of tissue remodeling. In this study, the critical need for airway-specific material properties is addressed, reporting bronchial tree anisotropic and heterogeneous material properties.

Entities:  

Keywords:  airway characterization; anisotropy; heterogeneity; lung; mechanical properties; viscoelasticity

Mesh:

Year:  2018        PMID: 29745796     DOI: 10.1152/japplphysiol.00090.2018

Source DB:  PubMed          Journal:  J Appl Physiol (1985)        ISSN: 0161-7567


  13 in total

1.  Localized compliance measurement of the airway wall using anatomic optical coherence elastography.

Authors:  Ruofei Bu; Santosh Balakrishnan; Hillel Price; Carlton Zdanski; Sorin Mitran; Amy L Oldenburg
Journal:  Opt Express       Date:  2019-06-10       Impact factor: 3.894

Review 2.  Assessment of Heterogeneity in Lung Structure and Function During Mechanical Ventilation: A Review of Methodologies.

Authors:  Jacob Herrmann; Michaela Kollisch-Singule; Joshua Satalin; Gary F Nieman; David W Kaczka
Journal:  J Eng Sci Med Diagn Ther       Date:  2022-05-11

Review 3.  Computational lung modelling in respiratory medicine.

Authors:  Sunder Neelakantan; Yi Xin; Donald P Gaver; Maurizio Cereda; Rahim Rizi; Bradford J Smith; Reza Avazmohammadi
Journal:  J R Soc Interface       Date:  2022-06-08       Impact factor: 4.293

4.  Mouse lung mechanical properties under varying inflation volumes and cycling frequencies.

Authors:  K A M Quiros; T M Nelson; S Sattari; C A Mariano; A Ulu; E C Dominguez; T M Nordgren; M Eskandari
Journal:  Sci Rep       Date:  2022-05-02       Impact factor: 4.996

5.  Wireless soft millirobots for climbing three-dimensional surfaces in confined spaces.

Authors:  Yingdan Wu; Xiaoguang Dong; Jae-Kang Kim; Chunxiang Wang; Metin Sitti
Journal:  Sci Adv       Date:  2022-05-27       Impact factor: 14.957

6.  Non-destructive vacuum-assisted measurement of lung elastic modulus.

Authors:  Jiawen Chen; Seyed Mohammad Mir; Meghan R Pinezich; John D O'Neill; Brandon A Guenthart; Matthew Bacchetta; Gordana Vunjak-Novakovic; Sarah X L Huang; Jinho Kim
Journal:  Acta Biomater       Date:  2021-06-27       Impact factor: 10.633

Review 7.  Role of Collagen in Airway Mechanics.

Authors:  Lumei Liu; Brooke Stephens; Maxwell Bergman; Anne May; Tendy Chiang
Journal:  Bioengineering (Basel)       Date:  2021-01-16

8.  Novel Mechanical Strain Characterization of Ventilated ex vivo Porcine and Murine Lung using Digital Image Correlation.

Authors:  Crystal A Mariano; Samaneh Sattari; Mohammad Maghsoudi-Ganjeh; Mehrzad Tartibi; David D Lo; Mona Eskandari
Journal:  Front Physiol       Date:  2020-12-04       Impact factor: 4.566

9.  Examining lung mechanical strains as influenced by breathing volumes and rates using experimental digital image correlation.

Authors:  C A Mariano; S Sattari; K A M Quiros; T M Nelson; M Eskandari
Journal:  Respir Res       Date:  2022-04-11

10.  Introducing a Custom-Designed Volume-Pressure Machine for Novel Measurements of Whole Lung Organ Viscoelasticity and Direct Comparisons Between Positive- and Negative-Pressure Ventilation.

Authors:  Samaneh Sattari; Crystal A Mariano; Swathi Vittalbabu; Jalene V Velazquez; Jessica Postma; Caleb Horst; Eric Teh; Tara M Nordgren; Mona Eskandari
Journal:  Front Bioeng Biotechnol       Date:  2020-10-21
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.