Literature DB >> 29745652

Constructing a Multiple Covalent Interface and Isolating a Dispersed Structure in Silica/Rubber Nanocomposites with Excellent Dynamic Performance.

Junchi Zheng, Dongli Han, Suhe Zhao, Xin Ye, Yiqing Wang, Youping Wu, Dong Dong1, Jun Liu, Xiaohui Wu, Liqun Zhang.   

Abstract

Realizing and manipulating a fine dispersion of silica nanoparticles (NPs) in the polymer matrix is always a great challenge. In this work, we first successfully synthesized N, N'-bis[3-(triethoxysilyl)propyl-isopropanol]-propane-1,3-diamine (TSPD), which was a new interface modifier, aiming to promote the dispersion of silica NPs. Through Fourier transform infrared spectroscopy, nuclear magnetic resonance analysis, and mass spectroscopy, we verified that TSPD contains together six ethoxy groups at its two ends. Then, we used this TSPD to modify the pure silica NPs, and this modified silica was abbreviated as D-MS, which is realized by the thermal gravimetric analysis examination, scanning electron microscopy analysis, and dynamic light scattering results. It was clearly observed that D-MS NPs are connected to one another but are not conglutinated tightly, exhibiting a novel predispersed structure with around 1-2 nm certain extent of interparticle distance. Next, we fabricated the following four elastomer nanocomposites such as pure silica/natural rubber (NR) composite (PS-NR), D-MS/NR composite (DMS-NR), bis-(γ-triethoxysilylpropyl)-tetrasulfide (TESPT)-modified silica/NR composite (TS-NR), and TESPT-modified D-MS/NR composite (T&DMS-NR) and found that the Payne effect is the smallest for T&DMS-NR via the combination use of the D-MS and the traditional coupling agent TESPT, which is attributed to its best dispersion state evidenced by the transmission electron microscopy results. Moreover, by measuring a series of other important mechanical performances such as the stress-strain curve, the dynamic strain dependence of the loss factor, and the heat build-up, we concluded that the T&DMS-NR system greatly exceeds those of the three other rubber composites. In general, this new approach provides a good opportunity to prepare a silica/rubber composite with excellent properties in mechanical strength and dynamic behavior by tailoring the fine dispersion of NPs.

Entities:  

Keywords:  dispersed structure; dynamic performance; multiple chemical interfaces; silica/rubber nanocomposites

Year:  2018        PMID: 29745652     DOI: 10.1021/acsami.8b02358

Source DB:  PubMed          Journal:  ACS Appl Mater Interfaces        ISSN: 1944-8244            Impact factor:   9.229


  3 in total

1.  Surface Energy Mapping of Modified Silica Using IGC Technique at Finite Dilution.

Authors:  Yen Wan Ngeow; Daryl R Williams; Andrew V Chapman; Jerry Y Y Heng
Journal:  ACS Omega       Date:  2020-05-01

Review 2.  Recent trends in industrial and academic developments of green tyre technology.

Authors:  V Bijina; P J Jandas; Sherin Joseph; J Gopu; K Abhitha; Honey John
Journal:  Polym Bull (Berl)       Date:  2022-09-12       Impact factor: 2.843

3.  Performance Enhancement of Polymerized, Functionalized Solution Styrene-Butadiene Rubber Composites Using Oligomeric Resin towards Extremely Safe and Energy-Saving Tires.

Authors:  Neng Ye; Zhenya Wu; Xiaohui Wu; Yonglai Lu; Liqun Zhang
Journal:  Polymers (Basel)       Date:  2022-07-20       Impact factor: 4.967

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.