Literature DB >> 29724559

Fabrication of an interim complete removable dental prosthesis with an in-office digital light processing three-dimensional printer: A proof-of-concept technique.

Wei-Shao Lin1, Bryan T Harris2, John Pellerito3, Dean Morton4.   

Abstract

This report describes a proof of concept for fabricating an interim complete removable dental prosthesis with a digital light processing 3-dimensional (3D) printer. Although an in-office 3D printer can reduce the overall production cost for an interim complete removable dental prosthesis, the process has not been validated with clinical studies. This report provided a preliminary proof of concept in developing a digital workflow for the in-office additively manufactured interim complete removable dental prosthesis.
Copyright © 2018 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Mesh：

Year:  2018        PMID： 29724559     DOI： 10.1016/j.prosdent.2017.12.027

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  8 in total

Review 1.  3D printing restorative materials using a stereolithographic technique: a systematic review.

Authors:  Alvaro Della Bona; Viviane Cantelli; Vitor T Britto; Kaue F Collares; Jeffrey W Stansbury
Journal:  Dent Mater       Date:  2021-01-19       Impact factor: 5.304

2.  Surface Characteristics of Milled and 3D Printed Denture Base Materials Following Polishing and Coating: An In-Vitro Study.

Authors:  Pablo Kraemer Fernandez; Alexey Unkovskiy; Viola Benkendorff; Andrea Klink; Sebastian Spintzyk
Journal:  Materials (Basel)       Date:  2020-07-24       Impact factor: 3.623

3.  Intraoral scanning to fabricate complete dentures with functional borders: a proof-of-concept case report.

Authors:  Alexey Unkovskiy; Eugen Wahl; Anne Teresa Zander; Fabian Huettig; Sebastian Spintzyk
Journal:  BMC Oral Health       Date:  2019-03-13       Impact factor: 2.757

Review 4.  Additive Manufactured Polymers in Dentistry, Current State-of-the-Art and Future Perspectives-A Review.

Authors:  Codruta Victoria Tigmeanu; Lavinia Cosmina Ardelean; Laura-Cristina Rusu; Meda-Lavinia Negrutiu
Journal:  Polymers (Basel)       Date:  2022-09-03       Impact factor: 4.967

Review 5.  3D printed complete removable dental prostheses: a narrative review.

Authors:  Eva Anadioti; Leen Musharbash; Markus B Blatz; George Papavasiliou; Phophi Kamposiora
Journal:  BMC Oral Health       Date:  2020-11-27       Impact factor: 2.757

6.  Bone Regeneration Capability of 3D Printed Ceramic Scaffolds.

Authors:  Ju-Won Kim; Byoung-Eun Yang; Seok-Jin Hong; Hyo-Geun Choi; Sun-Ju Byeon; Ho-Kyung Lim; Sung-Min Chung; Jong-Ho Lee; Soo-Hwan Byun
Journal:  Int J Mol Sci       Date:  2020-07-08       Impact factor: 5.923

7.  3D-Printed Ceramic Bone Scaffolds with Variable Pore Architectures.

Authors:  Ho-Kyung Lim; Seok-Jin Hong; Sun-Ju Byeon; Sung-Min Chung; Sung-Woon On; Byoung-Eun Yang; Jong-Ho Lee; Soo-Hwan Byun
Journal:  Int J Mol Sci       Date:  2020-09-22       Impact factor: 5.923

8.  Duplicating Complete Dentures with Conventional and Digital Methods: Comparisons of Trueness and Efficiency.

Authors:  Li Chen; Deli Li; Jianfeng Zhou; Wei-Shao Lin; Jianguo Tan
Journal:  Dent J (Basel)       Date:  2022-03-01
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.