József Szalma1, László Vajta2, Lajos Olasz2, Edina Lempel3. 1. Department of Oral and Maxillofacial Surgery, University of Pécs, 5 Dischka Gy Street, Pécs, 7621, Hungary. szalma.jozsef@pte.hu. 2. Department of Oral and Maxillofacial Surgery, University of Pécs, 5 Dischka Gy Street, Pécs, 7621, Hungary. 3. Department of Restorative Dentistry and Periodontology, University of Pécs, 5 Dischka Gy Street, Pécs, 7621, Hungary.
Abstract
OBJECTIVES: The aim of this study was to determine the increase in heat production, preparation time, and cutting surface quality of conventional, high-speed rotating instruments and piezoelectric preparation for coronectomy procedures. MATERIALS AND METHODS: One hundred intact extracted molars were sectioned horizontally, sub-totally, 1 mm under the cemento-enamel line with five methods: (1) tungsten carbide torpedo (TcT), (2) round (TcR) drills using a conventional speed surgical straight handpiece (< 40,000 min-1), (3) tungsten carbide fissure (TcF), (4) diamond torpedo (DT) drills using a surgical high-speed, contra-angle handpiece (~ 120,000 min-1), or (5) a saw-like piezoelectric tip (PT). Temperatures, preparation times, and cutting surface irregularities were registered and the differences were analyzed with ANOVA, Tukey's HSD post hoc test (temperature, time) and with chi-square test (irregular surface). RESULTS: Rotating instruments produced a maximal temperature increase of less than 1 °C. TcF produced the least heat (ΔT = - 3.92 °C to the baseline), while PT produced significantly the highest temperature increases (ΔT = 12.38 °C, p < 0.001). Tungsten carbide drills were the fastest for coronectomy (from 55.9 to 64.3 s), while DT (169.7 s) while PT (146.8 s) were significantly slower. TcT and TcR drills produced an irregular root surface more frequently. CONCLUSIONS: During coronectomy, rotating instruments produced entirely acceptable heat, while PT produced unacceptable temperatures. Tungsten carbide drills performed coronectomies effectively, but the diamond torpedo and PT seemed clinically questionable. Considering heat, speed, and the cutting surface quality simultaneously, TcF in a surgical high-speed handpiece seems to be the best choice for coronectomy. CLINICAL RELEVANCE: The correct insert can significantly reduce excessive heat and operation time during coronectomy procedures.
OBJECTIVES: The aim of this study was to determine the increase in heat production, preparation time, and cutting surface quality of conventional, high-speed rotating instruments and piezoelectric preparation for coronectomy procedures. MATERIALS AND METHODS: One hundred intact extracted molars were sectioned horizontally, sub-totally, 1 mm under the cemento-enamel line with five methods: (1) tungsten carbide torpedo (TcT), (2) round (TcR) drills using a conventional speed surgical straight handpiece (< 40,000 min-1), (3) tungsten carbide fissure (TcF), (4) diamond torpedo (DT) drills using a surgical high-speed, contra-angle handpiece (~ 120,000 min-1), or (5) a saw-like piezoelectric tip (PT). Temperatures, preparation times, and cutting surface irregularities were registered and the differences were analyzed with ANOVA, Tukey's HSD post hoc test (temperature, time) and with chi-square test (irregular surface). RESULTS: Rotating instruments produced a maximal temperature increase of less than 1 °C. TcF produced the least heat (ΔT = - 3.92 °C to the baseline), while PT produced significantly the highest temperature increases (ΔT = 12.38 °C, p < 0.001). Tungsten carbidedrills were the fastest for coronectomy (from 55.9 to 64.3 s), while DT (169.7 s) while PT (146.8 s) were significantly slower. TcT and TcR drills produced an irregular root surface more frequently. CONCLUSIONS: During coronectomy, rotating instruments produced entirely acceptable heat, while PT produced unacceptable temperatures. Tungsten carbidedrills performed coronectomies effectively, but the diamond torpedo and PT seemed clinically questionable. Considering heat, speed, and the cutting surface quality simultaneously, TcF in a surgical high-speed handpiece seems to be the best choice for coronectomy. CLINICAL RELEVANCE: The correct insert can significantly reduce excessive heat and operation time during coronectomy procedures.
Entities:
Keywords:
Coronectomy; Diamond drill; Temperature; Third molar; Tungsten carbide drill
Authors: Stephan Christian Möhlhenrich; Nassim Ayoub; Ulrike Fritz; Andreas Prescher; Frank Hölzle; Ali Modabber Journal: Clin Oral Investig Date: 2016-12-28 Impact factor: 3.573
Authors: József Szalma; László Vajta; Edina Lempel; Ákos Tóth; Sára Jeges; Lajos Olasz Journal: J Craniomaxillofac Surg Date: 2017-07-27 Impact factor: 2.078
Authors: József Szalma; Ole Klein; Bálint Viktor Lovász; Edina Lempel; Sára Jeges; Lajos Olasz Journal: Biomed Res Int Date: 2018-11-19 Impact factor: 3.411