Literature DB >> 29655121

Effect of microstructure on the mechanical properties of lithium disilicate glass-ceramics.

Lubica Hallmann1, Peter Ulmer2, Matthias Kern3.   

Abstract

The mechanical properties of lithium disilicate glass-ceramics depend on various factors, a prominent one being their microstructure. The aim of this review article is to elucidate the effect of processing parameters such as annealing temperature, holding time, number of heating stages and chemical composition and additives on the microstructure and physical properties of these glass-ceramics.
Copyright © 2018. Published by Elsevier Ltd.

Entities:  

Keywords:  Lithium disilicate glass-ceramics; Mechanical properties; Microstructure

Mesh：

Substances：

Year:  2018        PMID： 29655121     DOI： 10.1016/j.jmbbm.2018.02.032

Source DB:  PubMed          Journal:  J Mech Behav Biomed Mater        ISSN： 1878-0180


  9 in total

1.  Microstructural development during heat treatment of a commercially available dental-grade lithium disilicate glass-ceramic.

Authors:  Angel L Ortiz; Oscar Borrero-López; Fernando Guiberteau; Yu Zhang
Journal:  Dent Mater       Date:  2019-03-01       Impact factor: 5.304

2.  Influence of thermal tempering processes on color characteristics of different monolithic computer-assisted design and computer-assisted manufacturing ceramic materials.

Authors:  Niwut Juntavee; Pithiwat Uasuwan
Journal:  J Clin Exp Dent       Date:  2019-07-01

3.  Effect of core materials for core fabrication for dental implants on in-vitro cytocompatibility of MC3T3-E1 cells.

Authors:  Jung-Hyun Park; Hyun Lee; Seen-Young Kang; Junesun Kim; Ji-Hwan Kim
Journal:  BMC Oral Health       Date:  2019-12-18       Impact factor: 2.757

4.  Effect of different surface treatments and multimode adhesive application on the Weibull characteristics, wettability, surface topography and adhesion to CAD/CAM lithium disilicate ceramic.

Authors:  Karina Barbosa Souza; Dayanne Monielle Duarte Moura; Sarah Emille Gomes da Silva; Gabriela Monteiro de Araújo; Rafael de Almeida Spinelli Pinto; Fabíola Pessôa Pereira Leite; Mutlu Özcan; Rodrigo Othávio de Assunção E Souza
Journal:  J Appl Oral Sci       Date:  2020-11-27       Impact factor: 2.698

5.  Flexural Strength of Vitreous Ceramics Based on Lithium Disilicate and Lithium Silicate Reinforced with Zirconia for CAD/CAM.

Authors:  Hazel P R Corado; Pedro H P M da Silveira; Vagner L Ortega; Guilherme G Ramos; Carlos N Elias
Journal:  Int J Biomater       Date:  2022-02-02

6.  A Review on CAD/CAM Yttria-Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) and Polymethyl Methacrylate (PMMA) and Their Biological Behavior.

Authors:  Cristina Herráez-Galindo; María Rizo-Gorrita; Serafín Maza-Solano; María-Angeles Serrera-Figallo; Daniel Torres-Lagares
Journal:  Polymers (Basel)       Date:  2022-02-24       Impact factor: 4.329

Review 7.  A study of bioactive glass-ceramic's mechanical properties, apatite formation, and medical applications.

Authors:  Andualem Belachew Workie; Shao-Ju Shih
Journal:  RSC Adv       Date:  2022-08-16       Impact factor: 4.036

8.  Comparison of Cytomorphometry and Early Cell Response of Human Gingival Fibroblast (HGFs) between Zirconium and New Zirconia-Reinforced Lithium Silicate Ceramics (ZLS).

Authors:  María Rizo-Gorrita; Irene Luna-Oliva; María-Ángeles Serrera-Figallo; José-Luis Gutiérrez-Pérez; Daniel Torres-Lagares
Journal:  Int J Mol Sci       Date:  2018-09-11       Impact factor: 5.923

9.  Effect of Thermocycling, Surface Treatments and Microstructure on the Optical Properties and Roughness of CAD-CAM and Heat-Pressed Glass Ceramics.

Authors:  Roxana-Diana Vasiliu; Sorin Daniel Porojan; Mihaela Ionela Bîrdeanu; Liliana Porojan
Journal:  Materials (Basel)       Date:  2020-01-14       Impact factor: 3.623
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.