Literature DB >> 29654798

Tailoring supersaturation from amorphous solid dispersions.

Na Li1, Lynne S Taylor2.   

Abstract

The maximum achievable concentration of a drug in solution is dictated by the chemical potential of the solid form. Because an amorphous solid has a higher chemical potential than the corresponding crystal form, in the absence of phase transformations, a higher transient solubility is expected. However, the chemical potential of an amorphous drug can be reduced by mixing with another component. Therefore, upon mixing with a polymer to form an amorphous solid dispersion (ASD), the maximum solution concentration achieved can be potentially altered, in particular if the polymer is poorly soluble in the dissolution medium. Such changes in the chemical potential of the drug may be a critical factor in determining the maximum achievable solution concentration, and could alter the crystallization driving force of the drug. Therefore, the aim of this study was to gain insights into the impact of poorly soluble polymers on the "amorphous solubility" of drugs formulated as amorphous solid dispersions. Lopinavir was selected as a model drug with a low crystallization tendency, enabling determination of the amorphous solubility as a function of ASD composition. Model polymers included cellulose acetate (CA), CA phthalate (CAP), ethylcellulose (EC), Eudragit® RL PO (EUD), hydroxypropylmethylcellulose (HPMC), HPMC acetate succinate (HPMCAS), and HPMC phthalate (HPMCP). The "amorphous solubility" of the drug alone was determined and then the changes in maximum achievable concentration were measured as a function of drug loading. Drug-polymer interactions were characterized using infrared spectroscopy (IR), differential scanning calorimetry (DSC) and moisture sorption analysis. The results showed that the maximum achievable concentration ("amorphous solubility") of lopinavir varied with the extent of drug-polymer interactions, as well as the drug weight fraction in the ASD. This information is of great value when evaluating the maximum achievable concentration of amorphous systems formulated with pH responsive polymers, and should contribute to a broader understanding of drug phase behavior in the context of ASDs.
Copyright © 2018 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Drug release; Miscibility; Polymer; Solubility; Thermodynamics

Mesh:

Substances:

Year:  2018        PMID: 29654798      PMCID: PMC5972073          DOI: 10.1016/j.jconrel.2018.04.014

Source DB:  PubMed          Journal:  J Control Release        ISSN: 0168-3659            Impact factor:   9.776


  39 in total

Review 1.  Drug-like properties and the causes of poor solubility and poor permeability.

Authors:  C A Lipinski
Journal:  J Pharmacol Toxicol Methods       Date:  2000 Jul-Aug       Impact factor: 1.950

Review 2.  Experimental and computational approaches to estimate solubility and permeability in drug discovery and development settings.

Authors:  C A Lipinski; F Lombardo; B W Dominy; P J Feeney
Journal:  Adv Drug Deliv Rev       Date:  2001-03-01       Impact factor: 15.470

3.  The solubility-permeability interplay when using cosolvents for solubilization: revising the way we use solubility-enabling formulations.

Authors:  Jonathan M Miller; Avital Beig; Robert A Carr; Gregory K Webster; Arik Dahan
Journal:  Mol Pharm       Date:  2012-02-22       Impact factor: 4.939

4.  Characterization of polymeric dispersions of dimenhydrinate in ethyl cellulose for controlled release.

Authors:  J Desai; K Alexander; A Riga
Journal:  Int J Pharm       Date:  2005-12-02       Impact factor: 5.875

5.  Hot melt extrusion of acrylic films.

Authors:  C Aitken-Nichol; F Zhang; J W McGinity
Journal:  Pharm Res       Date:  1996-05       Impact factor: 4.200

6.  Glass-liquid phase separation in highly supersaturated aqueous solutions of telaprevir.

Authors:  Laura I Mosquera-Giraldo; Lynne S Taylor
Journal:  Mol Pharm       Date:  2015-01-13       Impact factor: 4.939

Review 7.  The solubility-permeability interplay and oral drug formulation design: Two heads are better than one.

Authors:  Arik Dahan; Avital Beig; David Lindley; Jonathan M Miller
Journal:  Adv Drug Deliv Rev       Date:  2016-04-26       Impact factor: 15.470

8.  Nifedipine molecular dispersion in microparticles of ammonio methacrylate copolymer and ethylcellulose binary blends for controlled drug delivery: effect of matrix composition.

Authors:  Jingjun Huang; Rodney J Wigent; Joseph B Schwartz
Journal:  Drug Dev Ind Pharm       Date:  2006 Nov-Dec       Impact factor: 3.225

9.  Impact of polymers on crystal growth rate of structurally diverse compounds from aqueous solution.

Authors:  Grace A Ilevbare; Haoyu Liu; Kevin J Edgar; Lynne S Taylor
Journal:  Mol Pharm       Date:  2013-05-02       Impact factor: 4.939

10.  Dissolution performance of binary amorphous drug combinations--Impact of a second drug on the maximum achievable supersaturation.

Authors:  Niraj S Trasi; Lynne S Taylor
Journal:  Int J Pharm       Date:  2015-10-09       Impact factor: 5.875

View more
  18 in total

1.  Characterization of Phase Transformations for Amorphous Solid Dispersions of a Weakly Basic Drug upon Dissolution in Biorelevant Media.

Authors:  Ahmed Elkhabaz; Sreya Sarkar; Garth J Simpson; Lynne S Taylor
Journal:  Pharm Res       Date:  2019-10-30       Impact factor: 4.200

2.  pH-Dependent supersaturation from amorphous solid dispersions of weakly basic drugs.

Authors:  Bo Wang; Matthew J Nethercott; Akshay Narula; Michael Hanrahan; Shanming Kuang; Robert M Wenslow; Na Li
Journal:  Pharm Res       Date:  2021-12-10       Impact factor: 4.200

Review 3.  Recent Advances in Enhancement of Dissolution and Supersaturation of Poorly Water-Soluble Drug in Amorphous Pharmaceutical Solids: A Review.

Authors:  Qin Shi; Fang Li; Stacy Yeh; Sakib M Moinuddin; Junbo Xin; Jia Xu; Hao Chen; Bai Ling
Journal:  AAPS PharmSciTech       Date:  2021-12-10       Impact factor: 3.246

4.  Lopinavir-menthol co-crystals for enhanced dissolution rate and intestinal absorption.

Authors:  Noha D Fayed; Mona F Arafa; Ebtesam A Essa; Gamal M El Maghraby
Journal:  J Drug Deliv Sci Technol       Date:  2022-07-11       Impact factor: 5.062

5.  Dual mechanism of microenvironmental pH modulation and foam melt extrusion to enhance performance of HPMCAS based amorphous solid dispersion.

Authors:  Anh Q Vo; Xin Feng; Jiaxiang Zhang; Feng Zhang; Michael A Repka
Journal:  Int J Pharm       Date:  2018-08-21       Impact factor: 5.875

Review 6.  Drug-Rich Phases Induced by Amorphous Solid Dispersion: Arbitrary or Intentional Goal in Oral Drug Delivery?

Authors:  Kaijie Qian; Lorenzo Stella; David S Jones; Gavin P Andrews; Huachuan Du; Yiwei Tian
Journal:  Pharmaceutics       Date:  2021-06-15       Impact factor: 6.321

7.  Application of a Physiologically Based Pharmacokinetic Model to Develop a Veterinary Amorphous Enrofloxacin Solid Dispersion.

Authors:  Kaixiang Zhou; Meixia Huo; Wenjin Ma; Kun Mi; Xiangyue Xu; Samah Attia Algharib; Shuyu Xie; Lingli Huang
Journal:  Pharmaceutics       Date:  2021-04-22       Impact factor: 6.321

8.  Design and Characterization of Phosphatidylcholine-Based Solid Dispersions of Aprepitant for Enhanced Solubility and Dissolution.

Authors:  Sooho Yeo; Jieun An; Changhee Park; Dohyun Kim; Jaehwi Lee
Journal:  Pharmaceutics       Date:  2020-04-29       Impact factor: 6.321

9.  High Content Solid Dispersions for Dose Window Extension: A Basis for Design Flexibility in Fused Deposition Modelling.

Authors:  Rydvikha Govender; Susanna Abrahmsén-Alami; Staffan Folestad; Anette Larsson
Journal:  Pharm Res       Date:  2019-12-17       Impact factor: 4.200

10.  Improved solubility, dissolution rate, and oral bioavailability of main biflavonoids from Selaginella doederleinii extract by amorphous solid dispersion.

Authors:  Bing Chen; Xuewen Wang; Yanyan Zhang; Kangping Huang; Hao Liu; Dafen Xu; Shaoguang Li; Qicai Liu; Jianyong Huang; Hong Yao; Xinhua Lin
Journal:  Drug Deliv       Date:  2020-12       Impact factor: 6.419

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.