| Literature DB >> 29581452 |
Tatsuya Yokota1, Zbigniew R Struzik2, Peter Jurica1, Masahito Horiuchi3, Shuichi Hiroyama3, Junhua Li1, Yuji Takahara3, Koichi Ogawa4, Kohei Nishitomi3, Minoru Hasegawa3, Andrzej Cichocki1.
Abstract
We propose a novel semi-automatic approach to design biomarkers for capturing pharmacodynamic effects induced by pharmacological agents on the spectral power of electroencephalography (EEG) recordings. We apply this methodology to investigate the pharmacodynamic effects of methylphenidate (MPH) and atomoxetine (ATX) on attention deficit/hyperactivity disorder (ADHD), using rodent models. We inject the two agents into the spontaneously hypertensive rat (SHR) model of ADHD, the Wistar-Kyoto rat (WKY), and the Wistar rat (WIS), and record their EEG patterns. To assess individual EEG patterns quantitatively, we use an integrated methodological approach, which consists of calculating the mean, slope and intercept parameters of temporal records of EEG spectral power using a smoothing filter, outlier truncation, and linear regression. We apply Fisher discriminant analysis (FDA) to identify dominant discriminants to be heuristically consolidated into several new composite biomarkers. Results of the analysis of variance (ANOVA) and t-test show benefits in pharmacodynamic parameters, especially the slope parameter. Composite biomarker evaluation confirms their validity for genetic model stratification and the effects of the pharmacological agents used. The methodology proposed is of generic use as an approach to investigating thoroughly the dynamics of the EEG spectral power.Entities:
Mesh:
Substances:
Year: 2018 PMID: 29581452 PMCID: PMC5980101 DOI: 10.1038/s41598-018-23450-y
Source DB: PubMed Journal: Sci Rep ISSN: 2045-2322 Impact factor: 4.379
Figure 1Experimental procedure and signal acquisition. (A) EEG signals of each animal were recorded 10 minutes before and 60–90 minutes after injection of medication. No medication was administered on days 0 and 7. Day 4 was followed by a two-day washout period. (B) Schematic layout of electrode locations, left occipital (LO) electrode was used as a reference.
Figure 2Schematic illustration of the data processing flow and the main data processing concepts utilised.
Figure 3Result of experimental conditions in SHR, WKY, and WIS: Average and standard error of the mean (SEM) of slope, intercept and mPower parameters are depicted as bar and error bar. The marks ‘*’ and ‘#’ indicate the results of the statistical significance test, the one-tailed t-test, between the vehicle and other specific pharmacological agent administration for which the significant levels are 0.05 and 0.01, respectively. Positive and negative significance are colour-coded using black and red, respectively.
Results of two-way ANOVA analysis: each f-value and its significance is described.
| bands | Slope | Intercept | mPower | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Exp. Cond. | Strain | Interaction | Exp. Cond. | Strain | Interaction | Exp. Cond. | Strain | Interaction | |
| Total | 6.64** | 42.90** | 3.15** | 10.80** | 45.24 ** | 2.54 ** | 12.81 ** | 90.13 ** | 2.39** |
| lDelta | 7.00 ** | 28.43 ** | 1.97 * | 8.28** | 20.19 ** | 3.68 ** | 9.19 ** | 57.82 ** | 3.44** |
| Delta | 5.66 ** | 29.24 ** | 2.37 ** | 13.74** | 56.21 ** | 3.44 ** | 15.98 ** | 130.68 ** | 3.29** |
| Theta | 6.02 ** | 34.71 ** | 3.30 ** | 7.74 ** | 32.16 ** | 1.22 | 6.05 ** | 57.58 ** | 1.73 * |
| Alpha | 7.52 ** | 52.66 ** | 3.79 ** | 15.64 ** | 27.87 ** | 2.94 ** | 19.95 ** | 76.79 ** | 3.44** |
| Beta | 7.49 ** | 65.89 ** | 3.56 ** | 15.99 ** | 80.28 ** | 3.03 ** | 19.65 ** | 147.82 ** | 3.20** |
| Gamma | 16.32 ** | 38.85 ** | 1.65 | 7.97 ** | 2.77 | 1.40 | 4.69 ** | 0.00 | 1.43 |
| High | 13.37 ** | 13.21 ** | 2.73 ** | 10.72 ** | 7.65 ** | 1.07 | 11.32 ** | 20.38 ** | 1.25 |
| vHigh | 7.75 ** | 0.78 | 4.90 ** | 9.52 ** | 7.41 ** | 2.55 ** | 4.09 ** | 8.10 ** | 3.95** |
*There is a significant difference with α = 0.05.
**There is a significant difference with α = 0.01.
Figure 4Results of FDA: (A) shows the visualization of all samples via PCA and FDA from a 144-dimensional original feature space, which consists of slope and intercept parameters for 9 frequency bands and 8 experimental condition days; (B) shows the visualization of weighting parameter obtained by FDA for two classification objectives. Individual bar plots depict the horizontal or vertical sums of the absolute values of classification outcomes; (C) shows the matrices of rounded averages of classification rates via 10-fold CV for all combinations of experimental conditions and sub-bands in each classification objective.
Figure 5Results of average and SEM of weighting values of individual biomarkers and their classification rates. We focused on the difference in strains after the vehicle administration (left column), effects of MPH (centre column) and ATX (right column) compared with the vehicle, and discerned the weighting parameters via FDA for slope features (panel A), intercept features (panel B), mPower features (panel C), both slope and intercept features (panel D), and both slope and mPower features (panel E) in lDelta–Beta frequency bands. Bar plots depict the average and SEM of individual normalized weighting parameters, and values show average ±SEMs of classification rates via 10-fold CV test. Since the scale of slope and intercept parameters, and individual frequency bands are quite different (e.g., lDelta > delta > Theta > Alpha > Beta), individual weighting parameters were normalized depending on the individual scale, as ascertained for this visualization. Note that this normalization does not have any effect on the classification accuracy.
Biomarkers and effects on mPower.
| mPower | mPower&Slope |
| |
|---|---|---|---|
| Biomarker of SHR |
|
| 0.01 |
| Biomarker of WKY |
|
| 0.1 |
| Biomarker of WIS |
|
| 0.1 |
| Effect of MPH on SHR |
|
| 0.01 |
| Effect of MPH on WKY |
|
| 0.01 |
| Effect of MPH on WIS |
|
| 0.1 |
| Effect of ATX on SHR |
|
| 0.01 |
| Effect of ATX on WKY |
|
| 0.01 |
| Effect of ATX on WIS |
|
| 0.01 |
Figure 6Biomarkers to identify SHR, WKY, and WIS (panel A), and to identify the effects of MPH (panel B) and ATX (panel C): ratios of mPower parameters and combinations of mPower and slope parameters are used for the construction of biomarkers. Individual bars show the averages and SEM of values of: (left in each graph) the biomarker using only mPower; and (right in each graph) the biomarker using both mPower and slope for SHR, WKY, and WIS (in left, centre and right column, respectively). In addition, significant levels (P-values) are described above the bar obtained by one-tailed t-test: *(P ≤ 0.005), **(P ≤ 0.001), ***(P ≤ 0.001), #(P ≤ 10–5), and ##(P ≤ 10−10).