Inhibition of biofilm growth on polymer-MWCNTs composites and metal surfaces.

There is an increased interest in incorporating multi-wall carbon nanotubes (MWCNTs) into polymer matrices to control the adhesion of bacteria to surfaces and the subsequent formation of biofilm growth on the surface of water pipes, food packages, and medical devices. Microbial interactions with carbon nanotube-polymer composites in the environment are not well understood. The growth of Pseudomonas fluorescens (gram-negative) and Mycobacterium smegmatis (gram-positive) biofilms on copper, polyethylene (PE), polyvinyl chloride, and stainless steel was compared with growth on MWCNT-PE composites in order to gain insight into the effect of the surface properties of nanomaterials on the attachment and proliferation of microorganism which could result in the engineering of better, non-fouling materials. A statistical analysis of the biofilm growth showed a significant impact of materials for both P. fluorescens (p < 0.0001) and M. smegmatis (p = 0.00426). Biofilm growth after 56 days on PE compared to biofilm growth on copper surfaces decreased by 46.4% and 34.9% for P. fluorescens and M. smegmatis, respectively. Biofilm growth on PE-multiwall-carbon-nanotubes (MWCNTs)-composites surface compared to PE decreased by 89.3% and 29% for P. fluorescens and M. smegmatis, respectively. Bacterial species (p < 0.0006) and surface roughness (p < 0.0001) were important factors in determining the attachment and initial biofilm growth rate. The interactions between cells and material surface could be attributed to the complicated and collective effect of electrostatic forces, hydrophobic interactions, and hydrogen/covalent bonding. Further study is needed to determine whether or not there is a difference between the cell attachment in the exponential growth phase and the stationary, or decay, phase cells. Published by Elsevier B.V.