| Literature DB >> 29564894 |
Guoxuan Qin1,2, Yibo Zhang1,2, Kuibo Lan1, Lingxia Li1, Jianguo Ma1, Shihui Yu1.
Abstract
A novel method of fabricating flexible thin-film transistor based on single-crystalline Si nanomembrane (SiNM) with high- k Nb2O5-Bi2O3-MgO (BMN) ceramic gate dielectric on a plastic substrate is demonstrated in this paper. SiNMs are successfully transferred to a flexible polyethylene terephthalate substrate, which has been plated with indium-tin-oxide (ITO) conductive layer and high- k BMN ceramic gate dielectric layer by room-temperature magnetron sputtering. The BMN ceramic gate dielectric layer demonstrates as high as ∼109 dielectric constant, with only dozens of pA current leakage. The Si-BMN-ITO heterostructure has only ∼nA leakage current at the applied voltage of 3 V. The transistor is shown to work at a high current on/off ratio of above 104, and the threshold voltage is ∼1.3 V, with over 200 cm2/(V s) effective channel electron mobility. Bending tests have been conducted and show that the flexible transistors have good tolerance on mechanical bending strains. These characteristics indicate that the flexible single-crystalline SiNM transistors with BMN ceramics as gate dielectric have great potential for applications in high-performance integrated flexible circuit.Entities:
Keywords: BMN; TFT; flexible; nanomembrane; single-crystalline
Year: 2018 PMID: 29564894 DOI: 10.1021/acsami.8b00470
Source DB: PubMed Journal: ACS Appl Mater Interfaces ISSN: 1944-8244 Impact factor: 9.229