| Literature DB >> 29561584 |
Haibo Tang1, Junming Luo1, Xin Long Tian1, Yuanyuan Dong1, Jing Li1, Mingrui Liu1, Lina Liu1, Huiyu Song1, Shijun Liao1.
Abstract
Developing cheap and stable electrocatalysts is considered the key factor to achieve the large-scale application of fuel cells. In this paper, three-dimensional (3D) porous Co-doped vanadium nitride (VN) nanosheet-assembled microflowers are prepared with a facile solvothermal approach followed by nitridation at 500 °C in NH3. It is found that the microflower morphology and the Co doping both significantly enhance the oxygen reduction reaction (ORR) performance of the materials. Because the unique 3D porous structure provides higher specific surface area and more active sites as well as enriching the d electrons of V via doping, Co also improves the intrinsic activity of VN. Our optimal V0.95Co0.05N microflowers achieve a half-wave potential for the ORR of up to 0.80 V in 0.1 M KOH solution, which is almost comparable to that of commercial 20% Pt/C. More importantly, the catalysts show superior durability with little current decline (less than 12%) during chronoamperometric evaluation for over 25 000 s. These features make the V0.95Co0.05N microflowers attractive for fuel cell applications.Entities:
Keywords: Co-doped; d electrons; fuel cells; microflowers; oxygen reduction reaction; vanadium nitride
Year: 2018 PMID: 29561584 DOI: 10.1021/acsami.7b18504
Source DB: PubMed Journal: ACS Appl Mater Interfaces ISSN: 1944-8244 Impact factor: 9.229