M Gundogdu1, L I Aladag1. 1. Department of Prosthodontics, Faculty of Dentistry, Atatürk University, Erzurum, Turkey.
Abstract
OBJECTIVES: The aim of the present study was to evaluate the effects of self-etch and self-adhesive resin cements on the shear bond strength of ceramic core materials bonded to dentin. MATERIALS AND METHODS: Extracted, caries-free, human central maxillary incisor teeth were selected, and the vestibule surfaces were cut flat to obtain dentin surfaces. Ceramic core materials (IPS e.max Press and Prettau Zirconia) were luted to the dentin surfaces using three self-etch adhesive systems (Duo-Link, Panavia F 2.0, and RelyX Ultimate Clicker) and two self-adhesive resin systems (RelyX U200 Automix and Maxcem Elite). A shear bond strength test was performed using a universal testing machine. Failure modes were observed under a stereomicroscope, and bonding interfaces between the adhesive resin cements and the teeth were evaluated with a scanning electron microscope. Data were analyzed with Student's t-test and one-way analysis of variance followed by Tukey's test (α = 0.05). RESULTS: The type of adhesive resin cement significantly affected the shear bond strengths of ceramic core materials bonded to dentin (P < 0.05). Significant differences were noted between the ceramic core materials when the specimens were luted with self-adhesive resin cements (P < 0.05). The specimens luted with RelyX Ultimate Clicker had the highest shear bond strengths. CONCLUSION: The self-etch adhesive resin cements exhibited better shear bond strength than the self-adhesive resin cements, except for Panavia cement in the IPS e.max Press group. However, shear bond strengths of the self-adhesive resin cements were dependent on the nature of the ceramic core materials.
OBJECTIVES: The aim of the present study was to evaluate the effects of self-etch and self-adhesive resin cements on the shear bond strength of ceramic core materials bonded to dentin. MATERIALS AND METHODS: Extracted, caries-free, human central maxillary incisor teeth were selected, and the vestibule surfaces were cut flat to obtain dentin surfaces. Ceramic core materials (IPS e.max Press and Prettau Zirconia) were luted to the dentin surfaces using three self-etch adhesive systems (Duo-Link, Panavia F 2.0, and RelyX Ultimate Clicker) and two self-adhesive resin systems (RelyX U200 Automix and Maxcem Elite). A shear bond strength test was performed using a universal testing machine. Failure modes were observed under a stereomicroscope, and bonding interfaces between the adhesive resin cements and the teeth were evaluated with a scanning electron microscope. Data were analyzed with Student's t-test and one-way analysis of variance followed by Tukey's test (α = 0.05). RESULTS: The type of adhesive resin cement significantly affected the shear bond strengths of ceramic core materials bonded to dentin (P < 0.05). Significant differences were noted between the ceramic core materials when the specimens were luted with self-adhesive resin cements (P < 0.05). The specimens luted with RelyX Ultimate Clicker had the highest shear bond strengths. CONCLUSION: The self-etch adhesive resin cements exhibited better shear bond strength than the self-adhesive resin cements, except for Panavia cement in the IPS e.max Press group. However, shear bond strengths of the self-adhesive resin cements were dependent on the nature of the ceramic core materials.
Entities:
Keywords:
Adhesive resin cement; bond strength; ceramic core material