P Sathiyaraj1, James Jebaseelan Samuel1. 1. Department of Physics, Medical Gel Dosimetry Laboratory, School of Advanced Sciences, VIT University, Vellore, Tamil Nadu, India.
Abstract
AIMS: The aim of this study is to evaluate the dose rate and energy dependency of methacrylic acid gelatin tetrakis (hydroxymethyl) phosphonium chloride (MAGAT) gel in unflattened photon beam using X-ray computed tomography (CT) and ultraviolet (UV)-visible spectroscopy. MATERIALS AND METHODS: MAGAT gel was prepared and it was exposed to 6 MV flattened and unflattened beams. The dose selected for irradiation was ranging from 3 to 15 Gy with an increment of 3 Gy. The dose rate dependency of the gel was investigated by exposing the gel to three different dose rates of 250, 500, and 1500 cGy/min for flattening filter free (FFF). To verify the energy dependency of the gel, it was exposed by both FFF and flattening filter (FF) for constant dose rate (250 cGy/min) and different energy (6 and 10 MV X-ray photons). The exposed gels were scanned by X-ray CT and UV-visible spectrophotometer. RESULTS: The change in dose sensitivity observed over the dose rate from 250 cGy/min to 1500 cGy/min was 58.00% and 57.89% using a UV-visible spectrophotometer and X-ray CT analysis method. Energy dependency was evaluated with respect to dose sensitivity and the variation between 6 MV FF and FFF photon beams was found to be 2.20% and 2.21% using UV-visible spectrophotometer analysis and X-ray CT, respectively. Similarly, the variation noticed with 10 MV FF and FFF was 2.30% using UV-visible spectrophotometer analysis and 2.22% using X-ray CT analysis. CONCLUSIONS: The results clearly show that the MAGAT gel was highly dose rate-dependent and less dependent on energy. The beam quality variation between FF and FFF was less. The similar results obtained using X-ray CT scanner and UV-visible spectrophotometer indicate that this study can be recommended for polymer gel scanning procedure.
AIMS: The aim of this study is to evaluate the dose rate and energy dependency of methacrylic acid gelatin tetrakis (hydroxymethyl) phosphonium chloride (MAGAT) gel in unflattened photon beam using X-ray computed tomography (CT) and ultraviolet (UV)-visible spectroscopy. MATERIALS AND METHODS: MAGAT gel was prepared and it was exposed to 6 MV flattened and unflattened beams. The dose selected for irradiation was ranging from 3 to 15 Gy with an increment of 3 Gy. The dose rate dependency of the gel was investigated by exposing the gel to three different dose rates of 250, 500, and 1500 cGy/min for flattening filter free (FFF). To verify the energy dependency of the gel, it was exposed by both FFF and flattening filter (FF) for constant dose rate (250 cGy/min) and different energy (6 and 10 MV X-ray photons). The exposed gels were scanned by X-ray CT and UV-visible spectrophotometer. RESULTS: The change in dose sensitivity observed over the dose rate from 250 cGy/min to 1500 cGy/min was 58.00% and 57.89% using a UV-visible spectrophotometer and X-ray CT analysis method. Energy dependency was evaluated with respect to dose sensitivity and the variation between 6 MV FF and FFF photon beams was found to be 2.20% and 2.21% using UV-visible spectrophotometer analysis and X-ray CT, respectively. Similarly, the variation noticed with 10 MV FF and FFF was 2.30% using UV-visible spectrophotometer analysis and 2.22% using X-ray CT analysis. CONCLUSIONS: The results clearly show that the MAGAT gel was highly dose rate-dependent and less dependent on energy. The beam quality variation between FF and FFF was less. The similar results obtained using X-ray CT scanner and UV-visible spectrophotometer indicate that this study can be recommended for polymer gel scanning procedure.