Anup D Pant1, Larry Kagemann2,3, Joel S Schuman3, Ian A Sigal4, Rouzbeh Amini1. 1. Department of Biomedical Engineering, The University of Akron, Akron, OH, USA. 2. Lead Reviewer and Biomedical Engineer, Division of Ophthalmic and ENT Devices, Off ice of Device Evaluation, Center for Devices and Radiological Health, Food and Drug Administration, Silver Spring, MD, USA. 3. Department of Ophthalmology, NYU School of Medicine and Langone Medical Center, New York, NY, USA. 4. Department of Ophthalmology, The University of Pittsburgh, Pittsburgh, PA, USA.
Abstract
AIM: Previous studies have shown that the trabecular meshwork (TM) is mechanically stiffer in glaucomatous eyes as compared to normal eyes. It is believed that elevated TM stiffness increases resistance to the aqueous humor outflow, producing increased intraocular pressure (IOP). It would be advantageous to measure TM mechanical properties in vivo, as these properties are believed to play an important role in the pathophysiology of glaucoma and could be useful for identifying potential risk factors. The purpose of this study was to develop a method to estimate in-vivo TM mechanical properties using clinically available exams and computer simulations. DESIGN: Inverse finite element simulation. METHODS: A finite element model of the TM was constructed from optical coherence tomography (OCT) images of a healthy volunteer before and during IOP elevation. An axisymmetric model of the TM was then constructed. Images of the TM at a baseline IOP level of 11, and elevated level of 23 mmHg were treated as the undeformed and deformed configurations, respectively. An inverse modeling technique was subsequently used to estimate the TM shear modulus (G). An optimization technique was used to find the shear modulus that minimized the difference between Schlemm's canal area in the in-vivo images and simulations. RESULTS: Upon completion of inverse finite element modeling, the simulated area of the Schlemm's canal changed from 8,889 µm2 to 2,088 µm2, similar to the experimentally measured areal change of the canal (from 8,889 µm2 to 2,100 µm2). The calculated value of shear modulus was found to be 1.93 kPa, (implying an approximate Young's modulus of 5.75 kPa), which is consistent with previous ex-vivo measurements. CONCLUSION: The combined imaging and computational simulation technique provides a unique approach to calculate the mechanical properties of the TM in vivo without any surgical intervention. Quantification of such mechanical properties will help us examine the mechanistic role of TM biomechanics in the regulation of IOP in healthy and glaucomatous eyes.
AIM: Previous studies have shown that the trabecular meshwork (TM) is mechanically stiffer in glaucomatous eyes as compared to normal eyes. It is believed that elevated TM stiffness increases resistance to the aqueous humor outflow, producing increased intraocular pressure (IOP). It would be advantageous to measure TM mechanical properties in vivo, as these properties are believed to play an important role in the pathophysiology of glaucoma and could be useful for identifying potential risk factors. The purpose of this study was to develop a method to estimate in-vivo TM mechanical properties using clinically available exams and computer simulations. DESIGN: Inverse finite element simulation. METHODS: A finite element model of the TM was constructed from optical coherence tomography (OCT) images of a healthy volunteer before and during IOP elevation. An axisymmetric model of the TM was then constructed. Images of the TM at a baseline IOP level of 11, and elevated level of 23 mmHg were treated as the undeformed and deformed configurations, respectively. An inverse modeling technique was subsequently used to estimate the TM shear modulus (G). An optimization technique was used to find the shear modulus that minimized the difference between Schlemm's canal area in the in-vivo images and simulations. RESULTS: Upon completion of inverse finite element modeling, the simulated area of the Schlemm's canal changed from 8,889 µm2 to 2,088 µm2, similar to the experimentally measured areal change of the canal (from 8,889 µm2 to 2,100 µm2). The calculated value of shear modulus was found to be 1.93 kPa, (implying an approximate Young's modulus of 5.75 kPa), which is consistent with previous ex-vivo measurements. CONCLUSION: The combined imaging and computational simulation technique provides a unique approach to calculate the mechanical properties of the TM in vivo without any surgical intervention. Quantification of such mechanical properties will help us examine the mechanistic role of TM biomechanics in the regulation of IOP in healthy and glaucomatous eyes.
Authors: Julie A Last; Tingrui Pan; Yuzhe Ding; Christopher M Reilly; Kate Keller; Ted S Acott; Michael P Fautsch; Christopher J Murphy; Paul Russell Journal: Invest Ophthalmol Vis Sci Date: 2011-04-05 Impact factor: 4.799
Authors: Lucinda J Camras; W Daniel Stamer; David Epstein; Pedro Gonzalez; Fan Yuan Journal: Invest Ophthalmol Vis Sci Date: 2012-08-09 Impact factor: 4.799
Authors: Rafael Grytz; Kapil Krishnan; Ryan Whitley; Vincent Libertiaux; Ian A Sigal; Christopher A Girkin; J Crawford Downs Journal: Comput Methods Appl Mech Eng Date: 2019-10-01 Impact factor: 6.756
Authors: Frank Brodie; Michael Repka; Stephen Allan Burns; S Grace Prakalapakorn; Christie Morse; Joel S Schuman; Michael R Duenas; Natalie Afshari; John S Pollack; Jennifer E Thorne; Albert Vitale; H Nida Sen; David Myung; Mark S Blumenkranz; Elmer Tu; Daniel X Hammer; Michelle Tarver; Bradley Cunningham; Larry Kagemann; SriniVas Sadda; David Sarraf; Glenn J Jaffe; Malvina Eydelman Journal: JAMA Ophthalmol Date: 2021-01-01 Impact factor: 7.389
Authors: Ted S Acott; Janice A Vranka; Kate E Keller; VijayKrishna Raghunathan; Mary J Kelley Journal: Prog Retin Eye Res Date: 2020-08-11 Impact factor: 21.198