Literature DB >> 29320610

Fabry-Pérot Oscillation and Room Temperature Lasing in Perovskite Cube-Corner Pyramid Cavities.

Yang Mi1, Zhixiong Liu2, Qiuyu Shang3, Xinxiang Niu4, Jia Shi1, Shuai Zhang1, Jie Chen1, Wenna Du1, Zhiyong Wu1, Rui Wang1, Xiaohui Qiu1, Xiaoyong Hu4, Qing Zhang3, Tom Wu2, Xinfeng Liu1.   

Abstract

Recently, organometal halide perovskite-based optoelectronics, particularly lasers, have attracted intensive attentions because of its outstanding spectral coherence, low threshold, and wideband tunability. In this work, high-quality CH3 NH3 PbBr3 single crystals with a unique shape of cube-corner pyramids are synthesized on mica substrates using chemical vapor deposition method. These micropyramids naturally form cube-corner cavities, which are eminent candidates for small-sized resonators and retroreflectors. The as-grown perovskites show strong emission ≈530 nm in the vertical direction at room temperature. A special Fabry-Pérot (F-P) mode is employed to interpret the light confinement in the cavity. Lasing from the perovskite pyramids is observed from 80 to 200 K, with threshold ranging from ≈92 µJ cm-2 to 2.2 mJ cm-2 , yielding a characteristic temperature of T0 = 35 K. By coating a thin layer of Ag film, the threshold is reduced from ≈92 to 26 µJ cm-2 , which is accompanied by room temperature lasing with a threshold of ≈75 µJ cm-2 . This work advocates the prospect of shape-engineered perovskite crystals toward developing micro-sized optoelectronic devices and potentially investigating light-matter coupling in quantum optics.
© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Entities:  

Keywords:  Fabry-Pérot; chemical vapor deposition; cube-corner pyramids; lasing; perovskite

Year:  2018        PMID: 29320610     DOI: 10.1002/smll.201703136

Source DB:  PubMed          Journal:  Small        ISSN: 1613-6810            Impact factor:   13.281


  3 in total

Review 1.  Lead-Free Perovskites for Lighting and Lasing Applications: A Minireview.

Authors:  Elena V Ushakova; Sergei A Cherevkov; Vera A Kuznetsova; Alexander V Baranov
Journal:  Materials (Basel)       Date:  2019-11-22       Impact factor: 3.623

2.  A high-precision, template-assisted, anisotropic wet etching method for fabricating perovskite microstructure arrays.

Authors:  Xue-Fang Hu; Chang-Gui Lu; Quan Wang; Jing-Kun Xu; Yi-Ping Cui
Journal:  RSC Adv       Date:  2020-10-16       Impact factor: 4.036

3.  Room-temperature random lasing of metal-halide perovskites via morphology-controlled synthesis.

Authors:  Yu-Heng Hong; Tsung Sheng Kao
Journal:  Nanoscale Adv       Date:  2020-10-31
  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.