| Literature DB >> 29282263 |
Nicolas Mottet1,2, Sébastien Aubry2,3, Chrystelle Vidal4, Guillaume Boiteux4, Jean-Patrick Metz1, Didier Riethmuller1, Lionel Pazart4, Rajeev Ramanah1,2.
Abstract
INTRODUCTION: 2-D ultrasound shear wave elastography (SWE) could be considered as a new noninvasive tool for monitoring fetal lung development based on evaluation of mechanical properties during pregnancy. Interesting results are available concerning the use of SWE on developing organs, especially on premature infants and animal models. The main objective in this study is to evaluate the feasibility of 2-D SWE in human fetal lungs between 24 and 34 weeks of gestation (WG). The secondary objective is to modellise fetal lung-to-liver elastography ratio (LLE ratio) and to assess variations between normal lung and lung surfactant-enriched after a corticosteroids course indicated for a threatened preterm labour (TPL). METHODS/Entities:
Keywords: Shear wave elastography; elasticity; fetal; lung.
Mesh:
Year: 2017 PMID: 29282263 PMCID: PMC5770838 DOI: 10.1136/bmjopen-2017-018130
Source DB: PubMed Journal: BMJ Open ISSN: 2044-6055 Impact factor: 2.692
Figure 1(A) B-mode image of the fetal thorax centred on a four-chamber view of the fetal heart, using an abdominal convex probe 1–6 MHz. (B) Elastogram of the fetal thorax showing a colour-coded elasticity map: blue identifies deformable tissue and red indicates rigid tissues (kPa).
Figure 2Design of the study.
Variables and data stored for each SWE examination. ROI (region of interest)
| Maternal | Fetal | Technical |
| Age (years) | Presentation: Cephalic Breech Transverse | Young’s modulus (kPa) in nine ROI: Proximal lung: P1, P2, P3 Distal lung: D1, D2, D3 Liver: IV, V, VI |
| Weeks of gestation | Estimated fetal weight (grams) | Distance between probe and target ROI for each measurement (cm) |
| Body mass index (kg/m2) | Placenta: Position: anterior, posterior, lateral, fundal Thickness (cm) | Biophysical safety indices: Mechanical index (Mi) Thermal index (Ti) |
| Subcutaneous adipose tissue thickness (cm) | Amniotic fluid index (cm) |
Figure 3Measurement sites with 2D comb-push SWE using an abdominal convex probe 1–6 MHz (C1-6-D probe). Colour scale ranging from 0 to 48 kPa. Sufficient colour maps covering more than 50% of the sampling area obtained considered as a technical success. ROI are placed on homogeneous elastograms.- (A,B) three measurements on the proximal lung (anterior ‘P1’, medium ‘P2’ and posterior portion ‘P3’). - (A,C) three measurements on the distal lung (anterior ‘D1’, medium ‘D2’ and posterior portion ‘D3’). - (D–F) three measurements on three liver segments (IV, (V, VI). Operator will perform two cycles of nine kPa measurements while systematically repositioning the probe and each target ROI.
Figure 42D comb-push SWE on proximal fetal lung. Colour scale ranging from 0 to 48 kPa. On image (A), elastogram is not homogeneous and is degraded by artefact on the left side due to rib shadowing. By moving the probe to another location, a more homogeneous elastogram (B) is obtained allowing measurement.