Literature DB >> 29243680

A review of PEEK polymer's properties and its use in prosthodontics.

Gediminas Skirbutis, Agnė Dzingutė1, Viltė Masiliūnaitė, Gabrielė Šulcaitė, Juozas Žilinskas.   

Abstract

OBJECTIVE: The aim of this study is to review polyether ether ketone (PEEK), its characteristics and use in prosthodontics.
MATERIAL AND METHODS: Information search for articles about PEEK and it's use in prosthodontics between January 2010 and April 2017 was conducted in Medline via PubMed, Science direct, Wiley online library as well as the Web search Google Scholar sources. Twelve full text articles were selected and used in this review.
RESULTS: 143 articles were found in the database using keywords: PEEK, prosthodontics, dentistry. Data on the suitability of PEEK polymer were organized according to mechanical, chemical, physical properties and PEEK surface preparation.
CONCLUSIONS: PEEK polymer is suitable to use in prosthodontics. However, there are not enough statements about complications, biofilm formation on PEEK surface and its resistance to compression. More research should be done to find out the results.

Entities:  

Mesh:

Substances:

Year:  2017        PMID: 29243680

Source DB:  PubMed          Journal:  Stomatologija        ISSN: 1392-8589


  10 in total

1.  PEEK and fiberglass intra-radicular posts: influence of resin cement and mechanical cycling on push-out bond strength.

Authors:  Lara Christie Monteiro; Vanessa Gallego Arias Pecorari; Isabela Guerra Gontijo; Giselle Maria Marchi; Débora Alves Nunes Leite Lima; Flávio Henrique Baggio Aguiar
Journal:  Clin Oral Investig       Date:  2022-07-26       Impact factor: 3.606

2.  Surface Characteristics and Color Stability of Dental PEEK Related to Water Saturation and Thermal Cycling.

Authors:  Liliana Porojan; Flavia Roxana Toma; Mihaela Ionela Bîrdeanu; Roxana Diana Vasiliu; Ion-Dragoș Uțu; Anamaria Matichescu
Journal:  Polymers (Basel)       Date:  2022-05-25       Impact factor: 4.967

3.  Evaluation of Fracture Resistance and Microleakage of Endocrowns with Different Intracoronal Depths and Restorative Materials Luted with Various Resin Cements.

Authors:  Ouqba Ghajghouj; Simge Taşar-Faruk
Journal:  Materials (Basel)       Date:  2019-08-08       Impact factor: 3.623

4.  Comparison of Marginal Fit and Internal Adaptation of Copings Fabricated with Polyetheretherketone and Zirconia - An In vitro Study.

Authors:  V Amalorpavam; T Sreelal; Giri Chandramohan; G N Jithin
Journal:  J Pharm Bioallied Sci       Date:  2021-11-10

Review 5.  Prosthetic Materials Used for Implant-Supported Restorations and Their Biochemical Oral Interactions: A Narrative Review.

Authors:  Roxana Nicoleta Ionescu; Alexandra Ripszky Totan; Marina Meleșcanu Imre; Ana Maria Cristina Țâncu; Mihaela Pantea; Mihai Butucescu; Alexandru Titus Farcașiu
Journal:  Materials (Basel)       Date:  2022-01-28       Impact factor: 3.623

6.  Fracture resistance of polyetheretherketone, Ni-Cr, and fiberglass postcore systems: An in vitro study.

Authors:  Hossein Pourkhalili; Donya Maleki
Journal:  Dent Res J (Isfahan)       Date:  2022-02-28

7.  The effects of reinforcement with nanoparticles of polyetheretherketone, zirconium oxide and its mixture on flexural strength of PMMA resin.

Authors:  Deepali Barapatre; Surabhi Somkuwar; Sunil Kumar Mishra; Ramesh Chowdhary
Journal:  Eur Oral Res       Date:  2022-05-05

8.  Effect of Thermocycling on Shear Bond Strength of PEEK-A Comparative Study of Resin Luting Cements: An In-Vitro Study.

Authors:  Yekula Thapaswini; Nukalamarri O B P Chary; Kshitij V Pardeshi; Rajkiran Chitumalla; Sai A Cherukuri
Journal:  J Pharm Bioallied Sci       Date:  2022-07-13

Review 9.  Additive Manufactured Polymers in Dentistry, Current State-of-the-Art and Future Perspectives-A Review.

Authors:  Codruta Victoria Tigmeanu; Lavinia Cosmina Ardelean; Laura-Cristina Rusu; Meda-Lavinia Negrutiu
Journal:  Polymers (Basel)       Date:  2022-09-03       Impact factor: 4.967

10.  Adaptive Mechanism for Designing a Personalized Cranial Implant and Its 3D Printing Using PEEK.

Authors:  Syed Hammad Mian; Khaja Moiduddin; Sherif Mohammed Elseufy; Hisham Alkhalefah
Journal:  Polymers (Basel)       Date:  2022-03-21       Impact factor: 4.329

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.