Literature DB >> 29156394

Assessment of sampling strategies for estimation of site mean concentrations of stormwater pollutants.

David T McCarthy1, Kefeng Zhang2, Camilla Westerlund3, Maria Viklander4, Jean-Luc Bertrand-Krajewski5, Tim D Fletcher6, Ana Deletic2.   

Abstract

The estimation of stormwater pollutant concentrations is a primary requirement of integrated urban water management. In order to determine effective sampling strategies for estimating pollutant concentrations, data from extensive field measurements at seven different catchments was used. At all sites, 1-min resolution continuous flow measurements, as well as flow-weighted samples, were taken and analysed for total suspend solids (TSS), total nitrogen (TN) and Escherichia coli (E. coli). For each of these parameters, the data was used to calculate the Event Mean Concentrations (EMCs) for each event. The measured Site Mean Concentrations (SMCs) were taken as the volume-weighted average of these EMCs for each parameter, at each site. 17 different sampling strategies, including random and fixed strategies were tested to estimate SMCs, which were compared with the measured SMCs. The ratios of estimated/measured SMCs were further analysed to determine the most effective sampling strategies. Results indicate that the random sampling strategies were the most promising method in reproducing SMCs for TSS and TN, while some fixed sampling strategies were better for estimating the SMC of E. coli. The differences in taking one, two or three random samples were small (up to 20% for TSS, and 10% for TN and E. coli), indicating that there is little benefit in investing in collection of more than one sample per event if attempting to estimate the SMC through monitoring of multiple events. It was estimated that an average of 27 events across the studied catchments are needed for characterising SMCs of TSS with a 90% confidence interval (CI) width of 1.0, followed by E.coli (average 12 events) and TN (average 11 events). The coefficient of variation of pollutant concentrations was linearly and significantly correlated to the 90% confidence interval ratio of the estimated/measured SMCs (R2 = 0.49; P < 0.01) as well as the number of events required to achieve certain accuracy, and hence could be a promising surrogate for determining the sampling frequency needed to accurately estimate SMCs of pollutants. Crown
Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Monitoring; Sampling strategies; Site mean concentrations; Stormwater

Mesh:

Substances:

Year:  2017        PMID: 29156394     DOI: 10.1016/j.watres.2017.10.001

Source DB:  PubMed          Journal:  Water Res        ISSN: 0043-1354            Impact factor:   11.236


  2 in total

1.  BoSL FAL pump: A small, low-cost, easily constructed, 3D-printed peristaltic pump for sampling of waters.

Authors:  David T McCarthy; Baiqian Shi; Miao Wang; Stephen Catsamas
Journal:  HardwareX       Date:  2021-06-24

2.  Comparison of Time Resolved Optical Turbidity Measurements for Water Monitoring to Standard Real-Time Techniques.

Authors:  Anne Pallarès; Philippe Schmitt; Wilfried Uhring
Journal:  Sensors (Basel)       Date:  2021-04-30       Impact factor: 3.576

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.