Literature DB >> 29126692

Biomaterials in temporomandibular joint replacement: current status and future perspectives-a narrative review.

N De Meurechy1, A Braem2, M Y Mommaerts3.   

Abstract

The alloplastic total temporomandibular joint (TMJ) prosthesis has a long history, with many different materials and designs used. While several of these materials have proven valuable over time, many others have not been suitable for implantation, resulting in failure and the need for explantation of the implant. Because of the failure of several of these systems, the use of alloplastic prostheses has reduced dramatically, despite their advantages over autogenous restoration. The aim of this narrative review is to discuss the criteria that must be met by a biomaterial in order for it to be considered suitable for implantation, as well as the common complications that can occur. Currently used materials are highlighted, as well as potential future materials that might prove better suitable for implantation. Several surface modification techniques are proposed as an alternative to the materials used in current TMJ prosthesis systems.
Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  arthroplasty; biomaterials; prostheses and implants; temporomandibular joint

Mesh:

Substances:

Year:  2017        PMID: 29126692     DOI: 10.1016/j.ijom.2017.10.001

Source DB:  PubMed          Journal:  Int J Oral Maxillofac Surg        ISSN: 0901-5027            Impact factor:   2.789


  8 in total

Review 1.  Advancements in temporomandibular joint total joint replacements (TMJR).

Authors:  Siva Kumar Mamidi; Kristin Klutcharch; Shradha Rao; Julio C M Souza; Louis G Mercuri; Mathew T Mathew
Journal:  Biomed Eng Lett       Date:  2019-03-27

Review 2.  Total Alloplastic Temporomandibular Joint Replacement.

Authors:  Poonam Yadav; Ajoy Roychoudhury; Rudra Deo Kumar; Ongkila Bhutia; Tsering Bhutia; Bhaskar Aggarwal
Journal:  J Maxillofac Oral Surg       Date:  2021-08-18

Review 3.  3D Printing and Virtual Surgical Planning in Oral and Maxillofacial Surgery.

Authors:  Adeeb Zoabi; Idan Redenski; Daniel Oren; Adi Kasem; Asaf Zigron; Shadi Daoud; Liad Moskovich; Fares Kablan; Samer Srouji
Journal:  J Clin Med       Date:  2022-04-24       Impact factor: 4.964

4.  Effect of Surface Tooling Techniques of Medical Titanium Implants on Bacterial Biofilm Formation In Vitro.

Authors:  Sonia Sarfraz; Pilvi-Helinä Mäntynen; Marisa Laurila; Juho Suojanen; Juha Saarnio; Sami Rossi; Jani Horelli; Mika Kaakinen; Junnu Leikola; Justus Reunanen
Journal:  Materials (Basel)       Date:  2022-04-29       Impact factor: 3.748

Review 5.  Total Temporomandibular Joint Replacement: Stick to Stock or Optimization by Customization?

Authors:  Nikolas K G De Meurechy; Carlos E Zaror; Maurice Y Mommaerts
Journal:  Craniomaxillofac Trauma Reconstr       Date:  2020-02-27

Review 6.  Patient specific total temporomandibular joint reconstruction: A review of biomaterial, designs, fabrication and outcomes.

Authors:  Divya Mehrotra; Sumit Kumar; Pankhuri Mehrotra; Richa Khanna; Vikram Khanna; Dominic Eggbeer; Peter Evans
Journal:  J Oral Biol Craniofac Res       Date:  2021-03-10

7.  Puricelli biconvex arthroplasty as an alternative for temporomandibular joint reconstruction: description of the technique and long-term case report.

Authors:  Edela Puricelli
Journal:  Head Face Med       Date:  2022-07-29       Impact factor: 2.246

8.  Surface wear in a custom manufactured temporomandibular joint prosthesis.

Authors:  Nikolas De Meurechy; Merve Kübra Aktan; Bart Boeckmans; Stijn Huys; Denis R Verwilghen; Annabel Braem; Maurice Y Mommaerts
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2022-01-28       Impact factor: 3.405

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.