Literature DB >> 29081252

Glutaraldehyde inactivation of enveloped DNA viruses in the preparation of haemoglobin-based oxygen carriers.

Huiya Ma1, Qiuhui Li1, Kun Feng1, Yuanyuan Zhang1, Hongli Zhu1,2, Chao Chen1,2, Kunping Yan1,2.   

Abstract

Glutaraldehyde (GA), used medically as a disinfectant and as a crosslinker for haemoglobin (Hb)-based oxygen carriers (HBOCs), was investigated for its ability to inactivate viruses during the preparation of these artificial blood substitutes. Porcine parvovirus (PPV; a non-enveloped DNA virus) and porcine pseudorabies virus (PRV; an enveloped DNA virus) were used as the virus indicators. Upon treatment with 0.1 mM GA, the titer of PRV decreased from 9.62 log10 to 2.62 log10 within 0.5 h, whereas that of PPV decreased from 7.00 log10 to 2.30 log10 in 5 h. Following treatment with 1.0 mM GA, the titer of PRV decreased from 11.00 log10 to 1.97 log10 within 0.5 h, whereas that of PPV decreased from 7.50 log10 to 3.43 log10 in 4.5 h. During the polymerization of Hb with GA, the GA concentration decreased to 1.0 and 0.1 mM within 30 and 50 min, respectively, at a GA:Hb molar ratio of 10:1, whereas at a GA:Hb molar ratio of 30:1, GA decreased to those same concentrations in 1.5 and 2.5 h, respectively. This rapid decrease in GA concentration during its polymerization with Hb indicates that GA must be added into the Hb solution in a short time in order to get as high a initial concentration as possible. In this study, the GA can only inactivate PRV effectively, given that a longer time (4.5 h) was required for it to inactivate the PPV titer. This study therefore demonstrates that GA inactivates the enveloped DNA virus only during the preparation of HBOCs.

Entities:  

Keywords:  Glutaraldehyde; haemoglobin-based oxygen carriers (HBOCs); inactivation; porcine parvovirus; pseudorabies virus

Mesh:

Substances:

Year:  2017        PMID: 29081252     DOI: 10.1080/21691401.2017.1394875

Source DB:  PubMed          Journal:  Artif Cells Nanomed Biotechnol        ISSN: 2169-1401            Impact factor:   5.678


  1 in total

1.  3D printed ceramics as solid supports for enzyme immobilization: an automated DoE approach for applications in continuous flow.

Authors:  Alessia Valotta; Manuel C Maier; Sebastian Soritz; Magdalena Pauritsch; Michael Koenig; Dominik Brouczek; Martin Schwentenwein; Heidrun Gruber-Woelfler
Journal:  J Flow Chem       Date:  2021-04-29       Impact factor: 2.786

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.