Aqueous Hg(II) immobilization by chitosan stabilized magnetic iron sulfide nanoparticles.

Stabilized iron sulfide (FeS) nanoparticles have been proven effective in the adsorption of Hg from the water environment. However, previous work with these nanoparticles determined that the separation from the treated water was difficult and time-consuming. In this study, nanoscale FeS-Fe3O4 nanocomposites were firstly synthesized with chitosan as the stabilizer (CTO-MFeS). Then, the Hg adsorption capacity and mechanism were studied. Results showed that the size of the prepared nanoparticles was about 20nm and the specific surface area was 21.3m2/g. Hg removal by the CTO-MFeS nanoparticles involved both adsorption and precipitation. Further investigation with XPS showed that Hg2+ was adsorbed on the surface of the CTO-MFeS nanoparticles and reacted with CTO-MFeS to form HgS and [Fe(1-x)Hgx]S. It was also found as pH decreased below 4, the adsorption capacity of CTO-MFeS was significantly reduced that might be due to the dissolving of Fe. Additionally, the presence of Cl- resulted in the transformation of Hg2+ to HgClx2-x (x=1, 2, 3, 4) that competed with OH in solution for Hg2+ and therefore inhibited the adsorption of Hg. Our findings provide additional information that may be useful for a theoretical basis for Hg treatment in water environment.