Literature DB >> 29045121

Wafer-Scale Synthesis of Semiconducting SnO Monolayers from Interfacial Oxide Layers of Metallic Liquid Tin.

Torben Daeneke1, Paul Atkin1, Rebecca Orrell-Trigg1, Ali Zavabeti1, Taimur Ahmed1, Sumeet Walia1, Maning Liu2, Yasuhiro Tachibana2, Maria Javaid3, Andrew D Greentree3, Salvy P Russo3, Richard B Kaner4, Kourosh Kalantar-Zadeh1.   

Abstract

Atomically thin semiconductors are one of the fastest growing categories in materials science due to their promise to enable high-performance electronic and optical devices. Furthermore, a host of intriguing phenomena have been reported to occur when a semiconductor is confined within two dimensions. However, the synthesis of large area atomically thin materials remains as a significant technological challenge. Here we report a method that allows harvesting monolayer of semiconducting stannous oxide nanosheets (SnO) from the interfacial oxide layer of liquid tin. The method takes advantage of van der Waals forces occurring between the interfacial oxide layer and a suitable substrate that is brought into contact with the molten metal. Due to the liquid state of the metallic precursor, the surface oxide sheet can be delaminated with ease and on a large scale. The SnO monolayer is determined to feature p-type semiconducting behavior with a bandgap of ∼4.2 eV. Field effect transistors based on monolayer SnO are demonstrated. The synthetic technique is facile, scalable and holds promise for creating atomically thin semiconductors at wafer scale.

Entities:  

Keywords:  SnO; liquid metal; p-type; stannous oxide; two-dimensional materials

Year:  2017        PMID: 29045121     DOI: 10.1021/acsnano.7b04856

Source DB:  PubMed          Journal:  ACS Nano        ISSN: 1936-0851            Impact factor:   15.881


  5 in total

1.  Native Surface Oxides Featured Liquid Metals for Printable Self-Powered Photoelectrochemical Device.

Authors:  Yuqing Wang; Yaqi Li; Jingwei Zhang; Jincheng Zhuang; Long Ren; Yi Du
Journal:  Front Chem       Date:  2019-05-22       Impact factor: 5.221

2.  Advantages of eutectic alloys for creating catalysts in the realm of nanotechnology-enabled metallurgy.

Authors:  Jianbo Tang; Rahman Daiyan; Mohammad B Ghasemian; Shuhada A Idrus-Saidi; Ali Zavabeti; Torben Daeneke; Jiong Yang; Pramod Koshy; Soshan Cheong; Richard D Tilley; Richard B Kaner; Rose Amal; Kourosh Kalantar-Zadeh
Journal:  Nat Commun       Date:  2019-10-11       Impact factor: 14.919

Review 3.  Recent advances in the fabrication of 2D metal oxides.

Authors:  Huaguang Xie; Zhong Li; Liang Cheng; Azhar Ali Haidry; Jiaqi Tao; Yi Xu; Kai Xu; Jian Zhen Ou
Journal:  iScience       Date:  2021-12-10

4.  Structural and Electronic Properties of SnO Downscaled to Monolayer.

Authors:  Adil Mubeen; Abdul Majid; Mohammad Alkhedher; ElSayed M Tag-ElDin; Niyazi Bulut
Journal:  Materials (Basel)       Date:  2022-08-13       Impact factor: 3.748

Review 5.  Recent advances in the template-confined synthesis of two-dimensional materials for aqueous energy storage devices.

Authors:  Zhengnan Tian; Chaohui Wei; Jingyu Sun
Journal:  Nanoscale Adv       Date:  2020-04-28
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.