Literature DB >> 29030119

WEEE plastic sorting for bromine essential to enforce EU regulation.

Pierre Hennebert1, Montserrat Filella2.   

Abstract

The plastics of waste of electric and electronic equipment (WEEE) are improved for fire safety by flame retardants, and particularly brominated flame retardants (BFR). As waste, the management of these plastic fractions must comply with the update of the regulation of waste hazard classification (2014, 2017), the publication of a technical standard on management of WEEE (2015), and a restriction of use for decabromodiphenylether in the product regulation (2017). Data of bromine (n=4283) and BFR concentrations (n=98) in plastics from electric and electronic equipment (EEE), and from WEEE processing facilities before and after sorting for bromine in four sites in France have been studied for chemical composition and for regulatory classification. The WEEE was analysed by handheld X-ray fluorescence, and the waste was sorted after shredding, by on-line X-ray transmission for total bromine content (< or > 2000 mg/kg) in small household appliances (SHA), cathode ray tubes (CRT) and flat screens plastics. In equipment (n=347), 15% of the equipment items have no bromine, while 46% have at least one part with bromine, and 39% have all parts brominated. The bromine concentration in plastics is very heterogeneous, found in high concentrations in large household appliance (LHA) plastics, and also found in unexpected product categories, as observed by other authors. Clearly, an unwanted global loop of brominated substances occurs via the international recycling of plastic scrap. In waste (n=65), polybromobiphenyls, polybromodiphenylethers (PBDE), tetrabromobisphenol A (TBBPA) and hexabromocyclododecane were analysed. The most concentrated BFRs are decaBDE (3000 mg/kg) and TBBPA (8000 mg/kg). The bromine concentration of regulated brominated substances was identified in 2014 and 2015 to be up to 86% of total bromine in "old" waste (SHA, CRT), 30-50% in "younger" waste (Flat screens), and a mean of only 8% in recent products (2009-2013). Regulated substances are a minority of all the brominated substances and the only practical way to sort is to measure total bromine on-line. The sorting reduces the mean bromine concentration in the "Low Br" fraction in all sites, and reduces the decaBDE concentration to levels below the restricted use limit. After sorting, the concentration in the "High Br" fractions exceeds all present or future regulatory limits. In conclusion, sorting of small household appliances, cathode ray tubes and flat screen plastics is necessary to avoid uncontrolled dispersion of regulated substances in recycled raw material. Other categories (large household appliances, electric and electronic tools, lighting equipment) should also be considered, since their total bromine content (unweighted mean concentration) is high for some of these products. A European campaign consisting of 7 countries and 35 sites will begin in 2017, directed by WEEE Forum, the European association speaking for thirty-one not-for-profit e-waste producer responsibility organisations, to assess the mean bromine content of plastics from large household appliances after shredding.
Copyright © 2017 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Brominated flame retardants (BFR); Electric and electronic equipment (EEE); Hazard property (HP); Persistent organic pollutants (POP)

Mesh:

Substances:

Year:  2017        PMID: 29030119     DOI: 10.1016/j.wasman.2017.09.031

Source DB:  PubMed          Journal:  Waste Manag        ISSN: 0956-053X            Impact factor:   7.145


  4 in total

1.  Trends of electronic waste pollution and its impact on the global environment and ecosystem.

Authors:  Rida Akram; Shah Fahad; Muhammad Zaffar Hashmi; Abdul Wahid; Muhammad Adnan; Muhammad Mubeen; Naeem Khan; Muhammad Ishaq Asif Rehmani; Muhammadd Awais; Mazhar Abbas; Khurram Shahzad; Shakeel Ahmad; Hafiz Mohkum Hammad; Wajid Nasim
Journal:  Environ Sci Pollut Res Int       Date:  2019-04-25       Impact factor: 4.223

2.  Impact of PP Impurities on ABS Tensile Properties: Computational Mechanical Modelling Aspects.

Authors:  Charles Signoret; Anne-Sophie Caro-Bretelle; José-Marie Lopez-Cuesta; Patrick Ienny; Didier Perrin
Journal:  Polymers (Basel)       Date:  2021-05-19       Impact factor: 4.329

3.  Ecotoxicity of Plastics from Informal Waste Electric and Electronic Treatment and Recycling.

Authors:  Maria Angela Butturi; Simona Marinelli; Rita Gamberini; Bianca Rimini
Journal:  Toxics       Date:  2020-11-08

Review 4.  Recycling Plastics from WEEE: A Review of the Environmental and Human Health Challenges Associated with Brominated Flame Retardants.

Authors:  Cecilia Chaine; Andrew S Hursthouse; Bruce McLean; Iain McLellan; Brian McMahon; Jim McNulty; Jan Miller; Evi Viza
Journal:  Int J Environ Res Public Health       Date:  2022-01-11       Impact factor: 3.390

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.