Literature DB >> 28954217

One (sub-)acinus for all: Fate of inhaled aerosols in heterogeneous pulmonary acinar structures.

Philipp Hofemeier1, Kenishiro Koshiyama2, Shigeo Wada2, Josué Sznitman3.   

Abstract

Computational Fluid Dynamics (CFD) have offered an attractive gateway to investigate in silico respiratory flows and aerosol transport in the depths of the lungs. Yet, not only do existing models lack sufficient anatomical realism in capturing the heterogeneity and morphometry of the acinar environment, numerical simulations have been widely restricted to domains capturing a mere few percent of a single acinus. Here, we present to the best of our knowledge the most detailed and comprehensive in silico simulations to date on the fate of aerosols in the acinar depths. Our heterogeneous acinar domains represent complete sub-acinar models (i.e. 1/8th of a full acinus) based on the recent algorithm of Koshiyama & Wada (2015), capturing statistics of human acinar morphometry (Ochs et al. 2004). Our simulations deliver high-resolution, 3D spatial-temporal data on aerosol transport and deposition, emphasizing how variances in acinar heterogeneity only play a minor role in determining general deposition outcomes. With such tools at hand, we revisit whole-lung deposition predictions (i.e. ICRP) based on past 1D lung models. While our findings under quiet breathing substantiate general deposition trends obtained with past predictions in the alveolar regions, we underscore how deposition fractions are anticipated to increase, in particular during deep inhalation. For such inhalation maneuver, our simulations support the notion of significantly augmented deposition for all aerosol sizes (0.005-5.0μm). Overall, our efforts not only help consolidate our mechanistic understanding of inhaled aerosol transport in the acinar depths but also continue to bridge the gap between "bottom-up" in silico models and regional deposition predictions from whole-lung models. Such quantifications provide what is deemed more accurate deposition predictions in morphometrically-faithful models and are particularly useful in assessing inhalation strategies for deep airway deposition (e.g. systemic delivery).
Copyright © 2017 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Aerosol transport; Alveolar deposition; Computational fluid dynamics; In silico simulations; Inhalation therapy; Pulmonary acinus

Mesh:

Substances:

Year:  2017        PMID: 28954217      PMCID: PMC5810902          DOI: 10.1016/j.ejps.2017.09.033

Source DB:  PubMed          Journal:  Eur J Pharm Sci        ISSN: 0928-0987            Impact factor:   4.384


  60 in total

1.  Respiratory flow phenomena and gravitational deposition in a three-dimensional space-filling model of the pulmonary acinar tree.

Authors:  Josué Sznitman; Thomas Heimsch; Johannes H Wildhaber; Akira Tsuda; Thomas Rösgen
Journal:  J Biomech Eng       Date:  2009-03       Impact factor: 2.097

2.  Regional differences in alveolar density in the human lung are related to lung height.

Authors:  John E McDonough; Lars Knudsen; Alexander C Wright; W Mark Elliott; Matthias Ochs; James C Hogg
Journal:  J Appl Physiol (1985)       Date:  2015-06-01

Review 3.  Respiratory microflows in the pulmonary acinus.

Authors:  Josué Sznitman
Journal:  J Biomech       Date:  2012-11-21       Impact factor: 2.712

4.  Three-dimensional reconstruction of the rat acinus.

Authors:  R R Mercer; J D Crapo
Journal:  J Appl Physiol (1985)       Date:  1987-08

5.  Macroscopic isotropy of lung expansion.

Authors:  R Ardila; T Horie; J Hildebrandt
Journal:  Respir Physiol       Date:  1974-03

6.  Morphological study of pressure-volume hysteresis in rat lungs fixed by vascular perfusion.

Authors:  J Gil; E R Weibel
Journal:  Respir Physiol       Date:  1972-06

Review 7.  Human respiratory tract model for radiological protection. A report of a Task Group of the International Commission on Radiological Protection.

Authors: 
Journal:  Ann ICRP       Date:  1994

8.  Airflow and particle deposition simulations in health and emphysema: from in vivo to in silico animal experiments.

Authors:  Jessica M Oakes; Alison L Marsden; Celine Grandmont; Shawn C Shadden; Chantal Darquenne; Irene E Vignon-Clementel
Journal:  Ann Biomed Eng       Date:  2013-12-07       Impact factor: 3.934

9.  The effects of geometry on airflow in the acinar region of the human lung.

Authors:  Haribalan Kumar; Merryn H Tawhai; Eric A Hoffman; Ching-Long Lin
Journal:  J Biomech       Date:  2009-05-31       Impact factor: 2.712

10.  Standardization of techniques for using planar (2D) imaging for aerosol deposition assessment of orally inhaled products.

Authors:  Stephen Newman; William D Bennett; Martyn Biddiscombe; Sunalene G Devadason; Myrna B Dolovich; John Fleming; Sabine Haeussermann; Claudius Kietzig; Philip J Kuehl; Beth L Laube; Knut Sommerer; Glyn Taylor; Omar S Usmani; Kirby L Zeman
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2012-12       Impact factor: 2.849

View more
  13 in total

1.  Biomimetics of the pulmonary environment in vitro: A microfluidics perspective.

Authors:  Janna Tenenbaum-Katan; Arbel Artzy-Schnirman; Rami Fishler; Netanel Korin; Josué Sznitman
Journal:  Biomicrofluidics       Date:  2018-05-29       Impact factor: 2.800

2.  Aerosol delivery into small anatomical airway model through spontaneous engineered breathing.

Authors:  Chun-Kai Lin; Yuan-Yuan Hsiao; Pulak Nath; Jen-Huang Huang
Journal:  Biomicrofluidics       Date:  2019-08-07       Impact factor: 2.800

Review 3.  Use of computational fluid dynamics deposition modeling in respiratory drug delivery.

Authors:  P Worth Longest; Karl Bass; Rabijit Dutta; Vijaya Rani; Morgan L Thomas; Ahmad El-Achwah; Michael Hindle
Journal:  Expert Opin Drug Deliv       Date:  2018-12-10       Impact factor: 6.648

4.  Multiscale in silico lung modeling strategies for aerosol inhalation therapy and drug delivery.

Authors:  Pantelis Koullapis; Bo Ollson; Stavros C Kassinos; Josué Sznitman
Journal:  Curr Opin Biomed Eng       Date:  2019-11-13

5.  A computed tomography imaging-based subject-specific whole-lung deposition model.

Authors:  Xuan Zhang; Frank Li; Prathish K Rajaraman; Jiwoong Choi; Alejandro P Comellas; Eric A Hoffman; Benjamin M Smith; Ching-Long Lin
Journal:  Eur J Pharm Sci       Date:  2022-07-29       Impact factor: 5.112

6.  Microflows in two-generation alveolar cells at an acinar bifurcation.

Authors:  Yue Yang; Weitao Bai; Jun Dong; Huimin Lv; Yonggang Zhu
Journal:  Biomicrofluidics       Date:  2022-09-06       Impact factor: 3.258

Review 7.  Recent advances in the understanding of alveolar flow.

Authors:  Jun Dong; Yue Yang; Yonggang Zhu
Journal:  Biomicrofluidics       Date:  2022-04-13       Impact factor: 3.258

Review 8.  Advanced human-relevant in vitro pulmonary platforms for respiratory therapeutics.

Authors:  Arbel Artzy-Schnirman; Sivan Arber Raviv; Ofri Doppelt Flikshtain; Jeny Shklover; Netanel Korin; Adi Gross; Boaz Mizrahi; Avi Schroeder; Josué Sznitman
Journal:  Adv Drug Deliv Rev       Date:  2021-07-29       Impact factor: 15.470

Review 9.  How high resolution 3-dimensional imaging changes our understanding of postnatal lung development.

Authors:  Johannes C Schittny
Journal:  Histochem Cell Biol       Date:  2018-11-02       Impact factor: 4.304

10.  Airflow and Particle Deposition in Acinar Models with Interalveolar Septal Walls and Different Alveolar Numbers.

Authors:  Jinxiang Xi; Mohamed Talaat; Hesham Tanbour; Khaled Talaat
Journal:  Comput Math Methods Med       Date:  2018-09-25       Impact factor: 2.238

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.