Literature DB >> 28944766

Magnesium oxide nanoparticle-loaded polycaprolactone composite electrospun fiber scaffolds for bone-soft tissue engineering applications: in-vitro and in-vivo evaluation.

Ajay Suryavanshi1, Kunal Khanna, K R Sindhu, Jayesh Bellare, Rohit Srivastava.   

Abstract

The objective of the present investigation was to assess the potential of magnesium oxide nanoparticle (MgO NP)-loaded electrospun polycaprolactone (PCL) polymer composites as a bone-soft tissue engineering scaffold. MgO NPs were synthesized using a hydroxide precipitation sol-gel method and characterized using field emission gun-scanning electron microscopy/energy-dispersive x-ray spectroscopy (FEG-SEM/EDS), field emission gun-transmission electron microscopy (FEG-TEM), and x-ray diffraction (XRD) analysis. PCL and MgO-PCL nanocomposite fibers were fabricated using electrospinning with trifluoroethanol as solvent at 19 kV applied voltage and 1.9 ml h-1 flow rate as optimized process parameters, and were characterized by FEG-TEM, FEG-SEM/EDS, XRD, and differential scanning calorimetry analyses. Characterization studies of as-synthesized nanoparticles revealed diffraction peaks indexed to various crystalline planes peculiar to MgO particles with hexagonal and cubical shape, and 40-60 nm size range. Significant improvement in mechanical properties (tensile strength and elastic modulus) of nanocomposites was observed as compared to neat polymer specimens (fourfold and threefold, respectively), due to uniform dispersion of nanofillers along the polymer fiber length. There was a remarkable bioactivity shown by nanocomposite scaffolds in immersion test, as indicated by formation of surface hydroxyapatite layer by the third day of incubation. MgO-loaded electrospun PCL mats showed enhanced in-vitro biological performance with osteoblast-like MG-63 cells in terms of adhesion, proliferation, and marked differentiation marker activity owing to greater surface roughness, nanotopography, and hydrophilicity facilitating higher protein adsorption. In-vivo subcutaneous implantation study in Sprague Dawley rats revealed initial moderate inflammatory tissue response near implant site at the second week timepoint that subsided later (eighth week) with no adverse effect on vital organ functionalities as seen in histopathological analysis supported by serum biochemical and hematological parameters which did not deviate significantly from normal physiological range, indicating good biocompatibility in-vivo. Thus, MgO-PCL nanocomposite electrospun fibers have potential as an efficient scaffold material for bone-soft tissue engineering applications.

Entities:  

Mesh:

Substances:

Year:  2017        PMID: 28944766     DOI: 10.1088/1748-605X/aa792b

Source DB:  PubMed          Journal:  Biomed Mater        ISSN: 1748-6041            Impact factor:   3.715


  9 in total

Review 1.  Electropsun Polycaprolactone Fibres in Bone Tissue Engineering: A Review.

Authors:  Nadeem Siddiqui; Braja Kishori; Saranya Rao; Mohammad Anjum; Venkata Hemanth; Swati Das; Esmaiel Jabbari
Journal:  Mol Biotechnol       Date:  2021-03-10       Impact factor: 2.695

2.  Polycaprolactone/Gelatin/Hydroxyapatite Electrospun Nanomembrane Materials Incorporated with Different Proportions of Attapulgite Synergistically Promote Bone Formation.

Authors:  Jun Liu; Siyu Wu; Jiayi Ma; Chun Liu; Ting Dai; Xiaoyu Wu; Hongbin Zhao; Dong Zhou
Journal:  Int J Nanomedicine       Date:  2022-09-08

3.  Effect of the Addition of MgO Nanoparticles on the Thermally-Activated Shape Memory Behavior of Plasticized PLA Electrospun Fibers.

Authors:  Adrián Leonés; Laura Peponi; Stefano Fiori; Marcela Lieblich
Journal:  Polymers (Basel)       Date:  2022-06-29       Impact factor: 4.967

4.  Cytotoxicity Assessment of Surface-Modified Magnesium Hydroxide Nanoparticles.

Authors:  Mónica Echeverry-Rendón; Brina Stančič; Kirsten Muizer; Valentina Duque; Deanne Jennei Calderon; Felix Echeverria; Martin C Harmsen
Journal:  ACS Omega       Date:  2022-05-19

5.  Morphological and Molecular Analysis of Osteoblasts Differentiated from Mesenchymal Stem Cells in Polycaprolactone/Magnesium Oxide/Graphene Oxide Scaffold.

Authors:  Z Niknam; H Zali; V Mansouri; M Rezaei Tavirani; M Omidi
Journal:  Int J Organ Transplant Med       Date:  2019

6.  Building Scaffolds To Rebuild Kidneys.

Authors:  Benjamin S Freedman; Buddy Ratner
Journal:  ACS Cent Sci       Date:  2019-02-27       Impact factor: 14.553

7.  MgO Nanoparticles-Incorporated PCL/Gelatin-Derived Coaxial Electrospinning Nanocellulose Membranes for Periodontal Tissue Regeneration.

Authors:  Wenzao Peng; Shuangshuang Ren; Yibo Zhang; Ruyi Fan; Yi Zhou; Lu Li; Xuanwen Xu; Yan Xu
Journal:  Front Bioeng Biotechnol       Date:  2021-03-25

8.  Osteogenic Differentiation Potential of Adipose-Derived Mesenchymal Stem Cells Cultured on Magnesium Oxide/Polycaprolactone Nanofibrous Scaffolds for Improving Bone Tissue Reconstruction.

Authors:  Zahra Niknam; Ali Golchin; Mostafa Rezaei-Tavirani; Parviz Ranjbarvan; Hakimeh Zali; Meisam Omidi; Vahid Mansouri
Journal:  Adv Pharm Bull       Date:  2020-09-22

9.  Polycaprolactone/gelatin electrospun nanofibres containing biologically produced tellurium nanoparticles as a potential wound dressing scaffold: Physicochemical, mechanical, and biological characterisation.

Authors:  Mohsen Doostmohammadi; Hamid Forootanfar; Mojtaba Shakibaie; Masoud Torkzadeh-Mahani; Hamid-Reza Rahimi; Elham Jafari; Atefeh Ameri; Alieh Ameri
Journal:  IET Nanobiotechnol       Date:  2021-02-07       Impact factor: 2.050

  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.