| Literature DB >> 28924159 |
Taketeru Tomita1,2, Ryo Nozu3,4, Masaru Nakamura3, Shohei Matsuzaki4, Kei Miyamoto3,4, Keiichi Sato4.
Abstract
One of the mysteries of shark aplacental viviparity is the ability of the embryos to acquire oxygen from their mothers without a placental connection. It has been assumed that embryonic respiration in aplacental viviparous shark depends on oxygen from the uterine wall, although this hypothesis has not been confirmed quantitatively. Morphological observations of the uterine wall of white shark (Carcharodon carcharias) provided the first quantitative evidence to support the ability of the uterus to supply ample oxygen to the embryo of viviparous elasmobranchs. The uterine surface of the white shark is characterized by (1) uterine lamellae that develop perpendicular to the uterine wall, (2) uterine lamellae folded in an accordion-like fashion, and (3) numerous micro-ridges on the lamellar surface. These modifications result in increased uterine surface are to up to 56 folds compared to the uterus with a smooth surface. Histological observations revealed that the diffusion barrier of the uterine wall is approximately 12 µm. By using these values, the oxygen-diffusion capacity of 1 cm2 of the uterine wall of white shark was estimated to be 63.6 nmol·min-1·torr-1. This value is 250-400 times greater than that observed in other aplacental viviparous sharks (Squalus spp.) and is comparable with that of fish gills.Entities:
Mesh:
Substances:
Year: 2017 PMID: 28924159 PMCID: PMC5603572 DOI: 10.1038/s41598-017-11973-9
Source DB: PubMed Journal: Sci Rep ISSN: 2045-2322 Impact factor: 4.379
Figure 1Uterine specimen of white shark examined in this study (OCF-P 03062). (a) The pregnant adult female white shark from which the uterus was extracted. (b) Right (r) and left (l) uteri of the white shark. (c) Dissected uteri. Numerous lamellae cover the entire inner surface of the uterus. Black squares highlight the three sampling locations for uterine tissue (sites 1–3). Scale bar = 1 m in (a) and 10 cm in (b) and (c).
Figure 2Uterine lamellae of white shark. (a) Above view of the uterine lamellae. (b) Lateral view of the uterine lamellae. (c) Schematic representation of the uterine lamella folded in accordion-like fashion. Scale bar = 1 mm in (a) and (b).
Figure 3Scanning electron microscopy (SEM) images of the uterine wall. (a) Entire view of the uterine lamellae. (b) Close-up view of the white box in (a) showing the micro-ridges developed on the lamellar surface. (c) Cross section of the uterine lamellae showing a single blood vessel (bv) in each micro-ridge (mr).
Figure 4Histological thin section of the uterine lamellae. (a) Cross section of the uterine lamellae cut through the mid-half of lamellar height. (b) Close-up view of the uterine lamellae. (c) Close-up view of a part of a single lamella showing a blood vessel (bv) running through each micro-ridge (mr). (d) PAS-stained uterine surface. (e) Schematic representation of the cross section of uterine lamellae showing the locations of morphometric measurements. Abbreviations: bm, basement membrane; vd, blood vessel diameter; rc, red blood cell; CD, curved distance along the lamellar surface between two points (p1 and p2; linear distance between p1 and p2 = 200 µm); X, thickness of the diffusion barrier. Scale bars = 1 mm in (a) and 100 µm in (b), (c) and (d).
Morphometric measurements (±SD) of the uterine lamellae, and estimated oxygen-diffusion capacity of white shark uterus.
| Sampling locations | Projected area oflamellae S (cm2)*1 | Surface increase because of the presence of microridges α | Thickness of the diffusion barrier X (μm) | Oxygen-diffusion capacity D (nmol × min−1 × torr−1)*1,2 |
|---|---|---|---|---|
| Anterior (s1) | 16.1 (±0.4) | 1.96 (±0.50) | 11.9 (±1.9) | 69.5 (±21.0) |
| Intermediate (s2) | 12.1 (±2.5) | 2.17 (±0.38) | 11.8 (±2.0) | 58.3 (±18.6) |
| Posterior (s3) | 11.1 (±1.8) | 2.25 (±0.49) | 10.8 (±2.3) | 60.6 (±20.9) |
| Total | 13.1 (±2.8) | 2.13 (±0.47) | 11.5 (±2.1) | 63.6 (±22.7) |
*1Values for 1 cm2 of the uterine wall
*2D = K × 2 × α × S/X, K = 1.31 × 10−3 nmol × cm−1 × min−1 × torr−1 (see text for details).