Exploring bacterial outer membrane barrier to combat bad bugs.

One of the main fundamental mechanisms of antibiotic resistance in Gram-negative bacteria comprises an effective change in the membrane permeability to antibiotics. The Gram-negative bacterial complex cell envelope comprises an outer membrane that delimits the periplasm from the exterior environment. The outer membrane contains numerous protein channels, termed as porins or nanopores, which are mainly involved in the influx of hydrophilic compounds, including antibiotics. Bacterial adaptation to reduce influx through these outer membrane proteins (Omps) is one of the crucial mechanisms behind antibiotic resistance. Thus to interpret the molecular basis of the outer membrane permeability is the current challenge. This review attempts to develop a state of knowledge pertinent to Omps and their effective role in antibiotic influx. Further, it aims to study the bacterial response to antibiotic membrane permeability and hopefully provoke a discussion toward understanding and further exploration of prospects to improve our knowledge on physicochemical parameters that direct the translocation of antibiotics through the bacterial membrane protein channels.

Introduction

Antibiotic resistance can be defined as the capability of any microbial organism to counterattack effects of antimicrobial drugs (antibiotics) (Figure 1A) used against them.1,2 This phenomenon has become a global communal health threat due to an enormous increase in annual death rate.2 The emergence of highly resistant organisms has led to the requirement of new antibacterial drugs.1 Due to the slow progress of the current antibiotic research, there exists an enormous gap between bacterial evolution and the rate of development of novel antibiotic drugs.1,3,4 Only about two new classes of antibiotics have been brought to the market in the last three decades. On the technical front, there is an urgent need for a greater understanding of how antibiotics work, how bacteria progress with resistance against these antibiotics, and what molecular machinery could be exploited to get around bacterial defense mechanisms.1–4 The current innovative way of improving the potential of antibiotics is to effectively introduce them into bacteria and further prevent them from degradation by bacterial enzymes before they reach their targets. There is an extreme necessity for counteracting the problem of multi-antibiotic resistance.1,4 The important mechanism (Figure 1B) of resistance toward antibiotics known till date includes the enzymes-mediated deactivation of antibiotics for example, β-lactamase enzymes which hydrolyze and confer resistance against a diverse variety of antibiotics including penicillins, cephalosporins, carbapenems, and many more.4–7 The outer membrane vesicles (Figure 1C), these native vesicles released by Gram-negative bacteria, are mainly composed of periplasmic and outer membrane components including lipopolysaccharides, proteins, lipids, and other molecules.8–11 They help the producer cells while communicating with other cells concerning pathogenesis, secretion, nutrients acquisition, and self-defense.5,8–10 These moieties protect bacteria from various environmental stress factors including antibiotics, for example, gentamicin, imipenem, ampicillin, melittin, colistin, and many more.8–14 Further, resistance mechanism is also mediated by reducing the entry of antibiotics into the target site of bacteria which is mainly effected by specific alteration of outer membrane permeability (Figure 2). Efflux pumps effectively contribute towards resistance mechanism by antibiotic expulsion. In addition, antibiotic target proteins, for example, penicillin-binding proteins, are altered inside the bacterial cells, leading to antibiotic resistance.2,3,5,6,15–21

Figure 1

(A) Antibiotic resistance (an overview). (B) Various mechanisms of antibiotic resistance employed by Gram-negative bacteria (an overview). (C) Structural representation of outer membrane vesicles.

Abbreviation: Omps, outer membrane proteins.

Figure 2

Antibiotic resistance mechanism associated with Omps modification. Antibiotic β-lactam molecules are represented by green stars, and Omps as trimers by gray cylinder. The width of the straight arrows imitating the level of β-lactam penetration via Omps. The curved arrows exemplify the uptake failure/reduce uptake occurring with the following: B: decrease in the level of wild-type Omps expression; C: expression of restricted-channel Omps; D: mutation or modification of the functional properties of a porin channel; and E: synthesis of modified Omps with significant constriction.

Abbreviation: Omps, outer membrane proteins.

In this review, we present a systemic overview of the role of different membrane protein transporters responsible for antibiotic transport, present in the outer membrane of Gram-negative bacteria.4–6,22 We highlight the different achievements of the scientific community in understanding the uptake of different solutes including antibiotics.7,17,22 This active knowledge of the role of outer membrane influx in antibiotic transport in Gram-negative bacteria can be useful for antibiotic drug development in the future, where the computed data can be employed toward understanding the detailed mechanism of bacterial membrane transport, and to further design novel antibiotics with an effective permeability profile.

Gram-negative bacteria

Gram-negative bacteria have a multifaceted cell envelope comprising an outer membrane that restricts the access to the periplasm by acting as a molecular filter, thus forming an efficient selective permeation barrier.4–6,23,24 This outer membrane, like other biological membranes, is fundamentally built up of a bilayer of lipids.6,18,25,26 As such, this lipid bilayer membrane is mostly impermeable to hydrophilic molecules including nutrients.22,25,27 The effective intake of hydrophilic molecules is mainly controlled by specific water-filled open channels termed as outer membrane proteins (Omps) or porins.22,27–29 These Omps are intensively characterized in Gram-negative bacteria and are further distinguished as nonspecific and specific Omps in accordance with their functional structure (monomeric or trimeric),6,7,22,24–26,28 substrate specificity, regulation, and expression.15,18,29,30 These membrane proteins do not show any hydrophobic stretches in their amino acid sequences and majorly form hollow β-barrel structures with a hydrophobic outer surface.28,31 The barrel structure encompasses the transmembranous pore-type structure with a crucial function of facilitating the passive flux of hydrophilic substances22,28 and further acting as a functional diffusional barrier for nonpolar solutes.6,28 These proteins might show specific selectivity in general for either cations or anions.5,22,28

Bacterial adaptation to reduce influx through these Omps is an increasing problem that contributes, together with efflux systems, to antibiotic resistance.3–5,20,23,32–34 An existing challenge for drug design is to interpret membrane permeability at molecular level to get a better insight into the role of membrane transport (Figure 2) in bacterial resistance mechanism.4–7,20,35 Like other hydrophilic molecules, polar antibiotics including β-lactam antibiotics and fluoroquinolones majorly sneak into Gram-negative bacteria using these Omps.5,31,33 Any slight modification by the bacteria in the responsible Omps can significantly affect the antibiotic drug therapy.33 Many clinically pertinent bacterial species including Enterobacter aerogenes, Escherichia coli, Enterobacter cloacae, Klebsiella pneumoniae, Pseudomonas aeruginosa, and Acinetobacter baumannii have been sequenced for determining the effective key Omps (Table 1) present in the outer membrane.3–6,23,28,31–33,36,37 Further, bacterial bugs including Pseudomonas aeruginosa, and Acinetobacter baumannii possess an innate low vulnerability toward β-lactams, through reduced outer membrane permeability.5,6,20,22,38 For instance, reduced membrane permeability in Pseudomonas aeruginosa as compared to Enterobacteriaceae mainly occurs due to less number of Omps present in the outer membrane and their distinct physicochemical properties.22,38–41 In other Gram-negative bugs, for example, Escherichia coli, Enterobacter and Klebsiella pneumoniae, susceptibility toward β-lactam molecules is closely related to the presence of nonspecific diffusion Omps, for example, OmpF and OmpC.5,6,22

Table 1

Crucial Omps studied in different Gram-negative bacterial species

Species	Investigative porins or Omps
Escherichia coli (E. Coli)	OmpC,19,42–49 OmpF,7,19,21,36,42–46,49–74 PhoE75–76
Enterobacter aerogenes (E. aerogenes)	Omp36,16,49,77–79 Omp3549,77,78,80
Enterobacter cloacae (E. cloacae)	OmpE36,81 OmpE35
Klebsiella pneumoniae (K. pneumoniae)	OmpK36,42,49,82 OmpK3542,49,82
Pseudomonas aeruginosa (P. aeruginosa)	OccD1 (OprD), OccD2 (OpdC), OccD3 (OpdP), OccD4 (OpdT), OccD5 (OpdI), OccD6 (OprQ), OccD7 (OpdB), OccD8 (OpdJ)83–91OccK1 (OpdK), OccK2 (OpdF), OccK3 (OpdO), OccK4 (OpdL), OccK5 (OpdH), OccK6 (OpdQ), OccK7 (OpdD), OccK8 (OprE)61,88,89,92–98OprO,99 OprP90,99–102
Acinetobacter baumannii (A. baumannii)	OccAB1–OccAB5,35 rOprD,103 CarO104,105

Notes: Studies by Nikaido,5,6 Pages et al,22,42 and Schulz28 provide further insight.

Abbreviation: Omps, outer membrane proteins.

Previous works showing the effective role of different Omps (Table 1) in molecular influx of different antibiotics are shown in Table 2. We discuss the achievements of the scientific community in this area by studying the role of different Omps in outer membrane permeability, using separate set of theoretical and experimental techniques including molecular simulation (MS), electrophysiology, minimum inhibitory concentration assay, liposome swelling assay, X-ray crystallography, and fluorescence resonance energy transfer.

Table 2

Conclusive investigations with different Omps studied in different Gram-negative bacterial species

Conclusive investigation	Omps	Species
Measured the flux of charged β-lactamase inhibitors sulbactam, tazobactam, and avibactam using ETP zero-current assay and MS36	OmpF	E. coli
Measured the transport of charged β-lactamase inhibitors sulbactam, tazobactam, and avibactam using ETP zero-current assay59	OmpC	E. coli
Measured the permeability of carbapenems via different mutant proteins from different clinical isolates using ETP and LSA52	OmpC	E. coli
Quantified norfloxacin uptake using semiquantitative optofluidic assay56	OmpF	E. coli
Quantified and explained the mechanism of small antibiotic molecule enrofloxacin uptake using ETP and MS7	OmpF	E. coli
Quantified and demonstrated the translocation of imipenem, ceftazidime, and cefepime using ETP74	OmpF	E. coli
Demonstrated the interaction and binding of antibiotic meropenem with channel using ETP53	OmpF	E. coli
Demonstrated the translocation of polypeptides using ETP64	OmpF	E. coli
Demonstrated the permeation of enrofloxacin across the OmpF channel and modulation of the affinity site in the presence of magnesium using ETP and MS54,66,72	OmpF	E. coli
Demonstrated the transport of ampicillin and benzylpenicillin using ETP, MS, MIC, and LSA60	OmpF	E. coli
Demonstrated the role of charged residues in channel constriction, channel conductance, ion selectivity, and voltage gating using ETP and MS71	OmpF	E. coli
Demonstrated important electrostatic interactions between ions and charge distribution within the channel that govern ion permeation and selectivity using MS62	OmpF	E. coli
Demonstrated the ionization states of titratable amino acid residues and calculated self-consistently the electric potential distribution within channel using MS50	OmpF	E. coli
Demonstrated the movement of single ampicillin molecule via channel using ETP and MS67	OmpF	E. coli
Demonstrated the molecular origin of cation selectivity within Omps by defining the effect of alkali metal ions atomic radii on the binding-site affinity using ETP and MS58	OmpF	E. coli
Demonstrated the specific interaction of grepafloxacin, ciprofloxacin, moxifloxacin, and nalidixic acid with pore using UV–visible spectroscopic measurements68	OmpF	E. coli
Demonstrated the permeation of moxifloxacin across membrane channel and protein–antibiotic interaction using ETP, MS and FRET65	OmpF	E. coli
Investigated the effects of four polyamines (putrescine, cadaverine, spermidine, and spermine) on the activity of bacterial porins using ETP patch clamp106	OmpF	E. coli
Demonstrated the channel functional characteristics of four single amino acid substitutions and effect of deletion mutant in constriction loop L3 using ETP107 and crystallographic analysis108	OmpF	E. coli
Demonstrated the role of the constriction loop in voltage gating using ETP and crystallographic analysis109	OmpF	E. coli
Employed fluorescence quenching as a tool to investigate the antibiotic interactions with bacterial protein, using nalidixic acid and moxifloxacin, within the pore69	OmpF	E. coli
Demonstrated ampicillin translocation through the bacterial pore, and described the effect of mutations within pore affecting molecule passage using ETP and MS61	OmpF	E. coli
Provided a descriptive explanation about pathways of ions along channel surface using MS70	OmpF	E. coli
Probed the interaction of peptides, magainin 2, and HPA3P with the pore, and displayed the effect of electric field on pore and peptide geometry using ETP51	OmpF	E. coli
Demonstrated the translocation of ampicillin using multiscale approach combined with MS63	OmpF	E. coli
Demonstrated the effective binding of carbenicillin, ertapenem, and ampicillin within the pore using X-ray crystallography and MS21	OmpF	E. coli
Demonstrated the interaction involved in translocation of ampicillin, amoxicillin, carbenicillin, azlocillin, and piperacillin using ETP and MS57	OmpF	E. coli
Demonstrated the effect of specific acid residue D113A substitution on susceptibility to cefepime, cefpirome, cefotaxime, ceftazidime, cefoxitin, and ampicillin using MIC and MS73	OmpF	E. coli
Demonstrated the effective role of anti-loop 3 (Lys-16) residue in cefepime diffusion using LSA, ETP, and MS55	OmpF	E. coli
Demonstrated the effect of ion concentration and charged residues at constriction zone on gating behavior of channel using ETP47	OmpC	E. coli
Established the effect of three mutations within porins isolated from multidrug-resistant E. coli on transport of cefotaxime using MIC, ETP, and MS48	OmpC	E. coli
Studied the interaction strengths of ceftriaxone, cefpirome, and ceftazidime using effective fluorescence quenching and ETP44	OmpC, OmpF	E. coli
Demonstrated the influx of ceftriaxone, cefepime, ceftazidime, norfloxacin, ciprofloxacin, and enrofloxacin using a chip-based automated patch clamp technique based on ETP45	OmpC, OmpF	E. coli
Demonstrated the effect of culture medium on porin expression and piperacillin–tazobactam susceptibility using MIC46	OmpC, OmpF	E. coli
Using water as a probe, demonstrated macroscopic electric field inside water-filled channels using MS43	OmpF, OmpC	E. coli
Demonstrated the permeation of imipenem and meropenem to be dependent on electric dipole alignment of the molecule with an internal electric field of Omps, and identified the “preorientation” region within Omps affecting antibiotic pathway using MS19	OmpF, OmpC	E. coli
Demonstrated how the excess fixed positive charges within the Omps result in the characteristic anion selectivity using ETP75	PhoE	E. coli
Demonstrated the effect of amino group (lysines) and carboxyl groups on pore ion selectivity using ETP76	PhoE	E. coli
Demonstrated drug resistance by mutational loss of Omps, and measured the quantitative influx rates ofampicillin, benzylpenicillin, oxacillin, cloxacillin, cephalothin, cephaloridine, cefoxitin, cefamandole, cefotaxime, ceftazidime, ceftriaxone, cefepime, imipenem, ertapenem, novobiocin, and erythromycin using MIC49	OmpK35, OmpK36OmpF, OmpC	K. pneumoniaeE. coli
Examined the role of Omps in diffusion of ceftazidime–avibactam across the outer membrane using MIC42	Omp35, Omp36OmpK35, OmpK36OmpF, OmpC	E. aerogenesK. pneumoniaeE. coli
Studied imipenem resistance as a function of outer membrane permeability in different resistant clinical isolated strains using MIC77,78	Omp36, Omp35	E. aerogenes
Demonstrated the role of porin in selective susceptibility toward ceftriaxone using LSA and ETP80	Omp35	E. aerogenes
Demonstrated the effect of porin on the influx of ertapenem and cefepime using ETP and MIC16	Omp36	E. aerogenes
Demonstrated resistance due to porin mutation, affecting permeability of imipenem, cefepime, and cefpirome, in clinical strains using MIC79	Omp36	E. aerogenes
Demonstrated the effect of Omps on bacterial resistance to ceftazidime–avibactam, tigecycline, and colistin in clinical strains using MIC82	OmpK36, OmpK35	K. pneumoniae
Reported single-channel activity including broad-range conductance, gating dynamics, and cation selectivity for Omps subfamily using ETP84	OccD1–OccD6	P. aeruginosa
Explained the outer membrane uptake and characterized the carboxylate group interaction with central residues of the basic ladder (arginine and lysine) residues using ETP83	OccD1–OccD6,OccK1–OccK7	P. aeruginosa
Demonstrated channel activity conductance, gating transitions, one-open substate (K3), two-open substate(K4–K6), and three-open substate (K1, K2, K7) kinetics, anion selectivity, and positive residues within central constriction of the Omps using ETP89	OccK1–OccK7(K1–K7)	P. aeruginosa
Elucidated conductance, gating properties, and the effect of internal constriction loop deletion on gating transitions using MS96	OccK1	P. aeruginosa
Demonstrated gating dynamics comprising enthalpy-driven and entropy-driven current transitions and the effect of loop deletion on activation enthalpies and entropies over channel transitions using ETP93	OccK1	P. aeruginosa
Demonstrated the effect of ion concentrations on gating transitions of the channel using ETP94	OccK1	P. aeruginosa
Provided a structural insight into substrate specificity and channel structure with monomeric 18-stranded β-barrel ensuing narrow constriction within pore using crystallography, X-ray, and ETP85	OccD1	P. aeruginosa
Studied the role of specific surface loop regions within pore determining imipenem passage using ETP86	OccD1	P. aeruginosa
Demonstrated the translocation of natural amino acid substrates to understand structure and dynamics of pore using MS87	OccD1	P. aeruginosa
Demonstrated the uptake of imipenem and meropenem using ETP91	OccD3	P. aeruginosa
Demonstrated the role of Omps in the uptake of tricarboxylate, isocitrate, and citrate using ETP98	OccK5	P. aeruginosa
Demonstrated diverse gating properties of the channel using ETP and MS95	OccK5	P. aeruginosa
Demonstrated the involvement of the Omps in temocillin transport into a bacterial cell using MIC92	OccK1, OccK2	P. aeruginosa
Demonstrated the ion selectivity of phosphate-specific pore, and established the energetics for transport of phosphate, sulfate, chloride, and potassium ion using MS90,102	OprP	P. aeruginosa
Demonstrated the role of central-binding negatively charged residue (D94) in phosphate binding and selectivity using ETP and MS101	OprP	P. aeruginosa
Investigated the role of central arginine (R133) in defining selectivity and ion transport properties of the pore using ETP and MS100	OprP	P. aeruginosa
Demonstrated the effects of double mutations resulting in interchange of phosphate and diphosphate specificities of Omps using ETP and MS99	OprP, OprO	P. aeruginosa
Demonstrated the structural features responsible for transport of amino acid residues via substrate-specific channel using LSA, ETP, and MS97	OccK8	P. aeruginosa
Demonstrated Omps uptake of glycine and ornithine and no uptake of glutamic acid, glucose, and imipenem using LSA and MS105	CarO isoforms CarO1, CarO2, CarO3	A. baumannii
Demonstrated channel conductance, cationic selectivity, and specificity toward meropenem, glutamic acid, arginine, and imipenem using ETP104	CarO	A. baumannii
Demonstrated the function of the Omps in imipenem, meropenem, colistin, ceftazidime, and ciprofloxacin uptake using MIC103	rOprD homologue	A. baumannii
Demonstrated Omps substrate specificities toward glycine, ornithine, arginine, putrescine, glutamic acid, glucose, maltose, benzoic acid, phenylalanine, tryptophan, imipenem, meropenem, ceftazidime, ampicillin, and fosfomycin using LSA and ETP35	OccAB1–OccAB4	A. baumannii

Abbreviations: Omps, outer membrane proteins; ETP, electrophysiology; MS, molecular simulation; LSA, liposome swelling assay; MIC, minimum inhibitory concentration; FRET, fluorescence resonance energy transfer.

Discussion

Computing influx

Typical antibiotic activity toward bacterial cell occurs in micromolar concentration range, thereby representing values that are approximately limited to a thousand molecules inflowing the cell in few minutes to hours.7,22 Such numbers are considerably beneath the detection limit of most of the techniques and thus require significant amplification of the signal.4,7,22,110 Measuring the flux of small molecules across the outer cell membrane can be possibly achieved by different approaches including whole-cell assays, which require computation of flux using genetically engineered bacterial cell.7,111,112 These methods involve soaking bacteria in antibiotics for a fixed time followed by a separation process to remove the external media from the internalized antibiotics.7 However, the quality of the separation method is crucial for improving permeability.7,111,112 There are several published studies employing whole-cell assays to quantify the uptake, and their quality has been intensively compared.7,110–116 Once the separation technique allows collecting sufficient amounts of internalized antibiotics, several biophysical methods can be used to quantify the intracellular antibiotics.7,113–118 One of the promising tools for studying intracellular accumulation is mass spectrometry. The technique was successfully applied in measuring the uptake of antibiotics;117,118 for example, a work demonstrated cellular uptake of linezolid by E. coli using liquid chromatography–mass spectrometry.118

The discussed methods allow quantifying the total turnover of a cell uptake which represents the relevant actual effective concentration seen by the bacteria. On the contrary, the comprehensive flux depends on a multitude of parameters and renders the molecular understanding difficult.7,22 To understand the molecular origin of the antibiotic uptake, we need information on the role of each individual involved component. For example, the so-called liposome swelling assay provides information on a model system.35,52,55,60,80,97,105 The method involves reconstitution of batches of purified Omps into (multilamellar) liposomes.7,22 Under isosmotic addition, the diffusion of substrate inside the liposome results in alteration of the light-scattering pattern. The effective change in light-scattering signal is then correlated with the relative permeability of the molecules. The main disadvantage of this method is that it requires a large quantity of material and is only effective for uncharged molecules, whereas for charged molecules, the effect of counterion flow affects the quality of the measurement. Moreover, the assay can only determine average turnover numbers and often does not provide conclusive values.7

Moreover, using conventional electrophysiology, computation of rate of flux of discrete small molecules across Omps present in bacterial outer cell membrane involves measurement of flux values at single molecular level.7,36,45,52,56,66,67 Here, electrophysiological measurement using single Omps provides the best high-resolution (Figure 3) signal-to-noise ratio,7,18,40,73,74,83 thereby suggesting the higher efficacy of this method in sensing and understanding uptake at molecular level.7,15,22 The method includes reconstitution of a single or multiple Omps into an artificial planar lipid bilayer and further uses transmembrane potential-driven ion current across the channel as a detection probe.7,67 Using ion current as a probe specifically demonstrates very well-characterized electrophysiological properties of the Omps,15,34,45,65,66,84,106,119–121 including size,122,123 single-channel conductance, channel ion selectivity,58,75,76,90,99–101 channel gating dynamics, and more.47,95,109 Likewise, the size of Omps is a key factor defining transport through the channel.107,108 This factor plays a key role in antibiotic susceptibility.72–74 Determination of the size of Omps using electrophysiology provides a crucial insight into the maximum size of molecule they can transport.122,123 This, further, helps in evaluating the inner structure including constriction site.122–125 Further, single-channel conductance of Omps, ion selectivity,58,75,76,84,89 and gating dynamics35,47,94,95,109 give an insight into the channel–substrate binding and channel–substrate interactions.35,71,83,85,97,99,101 An insight into the channel conductance can be obtained, specifically using staircase electrophysiology (Figure 3A and B), where real-time insertions of single channels at constant voltage can be attained.59,123 The conductance of any channel can be termed as its unique characteristic. This allows a better understanding of the open/close states of the channel and its gating dynamics which can then be employed in studying channel structure–activity relationship.35,71,107,108

Figure 3

(A) Current recorded using staircase electrophysiology. A graphical representation depicting insertion of Omp over real time under applied potential. Recording time: 18 seconds. (B) Current histogram for the trace with each peak resembling a single Omp, showing, in total, approximately 45 Omps. (C) OmpF single channel–substrate interaction comparison: without substrate (blank), substrate 1 depicting no blockages, and substrate 2 inducing well-resolved channel blockage; a clear difference between the two substrates can be seen.

Abbreviation: Omp, outer membrane protein.

Using these functions, a proper insight into the channel interaction with different substrates can be obtained including substrate-induced partial or full blockage (Figure 3C) of channel52,53,67 and substrate-induced gating.67 The function of these pores has been well documented on the basis of pore characteristics, chemical modification, and genetic mutations.15 These parameters were further used to elaborate transport of the following antibiotics: meropenem,52 imipenem,52 cefotaxime,48 cefpirome,44 ceftriaxone,44,45 cefepime,45 ceftazidime,44,45 ciprofloxacin,45 norfloxacin,45 and enrofloxacin45 through OmpC; imipenem,74 meropenem,53 ceftazidime,44,45,74 cefepime,45,55,74 ceftriaxone,44,45 cefpirome,44 ampicillin,57,60,61,67 benzylpenicillin,60 amoxicillin,57 carbenicillin,57 azlocillin,57 piperacillin,57 ciprofloxacin,45 norfloxacin,45,56,126 enrofloxacin,7,45,54,66,72 moxifloxacin,65 different poly arginines,64 polyamines,106 and antimicrobial peptides51 through OmpF; ceftriaxone80 through Omp35; cefepime16 through Omp36; imipenem91 and meropenem91 through OccD3; imipenem86 through OccD1; and meropenem,104 glutamic acid,104 arginine,104 and imipenem104 through CarO Omp (Table 2).

In contrast, single-channel recording provides the best signal-to-noise ratio and intrinsic data on Omp–substrate interaction.40,45,65–67 But the interpretation of molecule translocation cannot be made directly as the chances of molecule exit on the entry side are almost identical when compared to the transport of the molecule across the pore.7 Whereas in the case of charged molecules, direct conclusion of translocation can be made as the increasing voltage will reduce the residence time of the molecules inside the Omp, which might provide some evidence of transport across the Omp. In addition, using channel selectivity, that is, channel inherent selection of either anion or cation, a quantitative flux assessment of the charged molecules can be made using electrophysiological reversal potential measurements.36,59 Using this approach, flux of β-lactamase inhibitors across OmpF and OmpC was estimated, showing the role of Omps in their transport across bacterial biobarrier.36,59 However, most of the molecules did not carry a net charge or show low intrinsic solubility which makes them trivial to measure and thus excludes them from screening via this method. Furthermore, the finite time resolution of electrophysiology also makes the method limited in screening of antibiotics uptake.7,45,66,67

Molecular simulation

In the current scenario, MS is well suited to obtain a particular information at an atomic scale.121 Thus far, knowledge of the antibiotic translocation problem has pointed essentially toward three mechanisms including diffusion with molecule binding, a mechanism based on pore dehydration induced by the permeating molecule, and slow diffusion with molecule binding.50,61,62,70,71,97,99,121 Further, to discriminate among these mechanisms, and to attain a better description of the Omps behavior and their role in substrate transport, understanding the communication between pore and substrate is essential.119–121,127,128 Thanks to the high-resolution, molecular modeling simulations, detailed characterization is possible in terms of energetics (Figure 4 from Ghai et al)36 and bond formation including hydrogen bonds, hydrophobic contacts, and more.50,62,71,121

Figure 4

(A) Intrinsic depiction of the two-dimensional free energy of translocation of β-lactamase inhibitor (avibactam), reassembled from metadynamic simulations. (B) Lateral view and (C) topmost view of the avibactam inside OmpF pore in the two lowest minima near the constriction region and at the subsequent transition state. Reprinted with permission from Ghai I, Pira A, Scorciapino MA, et al. General method to determine the flux of charged molecules through nanopores applied to beta-lactamase inhibitors and OmpF. J Phys Chem Lett. 2017;8(6):1295–1301.36 Copyright (2017) American Chemical Society.

The complete control over the characteristics of the system allows MS to explain the impact of pinpoint mutations and the effects that arise due to different domains of the same proteins.95,100,101 Further, MS significantly allows understanding and interpreting available experimental data.50,61,62,70,121 When combined with experimental approach, MS proves to be a complementary method. For instance, together with electrophysiology,36,48,54,55,57,58,60,61,65–67,71–73,95,97,99–101 MS was used for understanding the transport of β-lactamase inhibitors (Figure 4), interaction of substrates with Omps (enrofloxacin, moxifloxacin, ampicillin, benzylpenicillin, carbenicillin, amoxicillin, azlocillin, piperacillin, ertapenem, imipenem, meropenem, cefepime, cefpirome, cefotaxime, ceftazidime, cefoxitin, and cefepime with OmpF;7,19,21,36,50,54,55,57,58,60–63,65–67,70–73 cefotaxime, imipenem, and meropenem with OmpC;19,48 natural amino acids with OccD1),87 ion transport including transport of phosphate potassium and chloride ion via OprP90,100–102 and OprO,99 and interaction of glycine ornithine, glucose, and imipenem with CarO isoforms.105 Further, for liposome swelling55,60,97,105 and minimum inhibitory concentration assay48,60,73 (not described), MS was helpful for understanding and interpreting the experimental results.

Rationalizing the process of permeation of antibiotics into Gram-negative bacteria via MS requires an accurate and exhaustive description of some key molecular properties of the antibiotic molecule.121 MS is the best alternative tool to obtain homogenously derived physical–chemical descriptors for molecules with or without experimental approach.121,127,128 MS based on all-atom empirical force fields with the resolution in microsecond time range and beyond could potentially provide a good level of description of the structural and dynamical properties of biological systems.119,121,127,128

Toward translational research

Translational research on understanding antimicrobial resistance has led to implausible development in recent years4,129 together with the expansion of novel techniques including proteomic analyses, high-sensitivity mass spectrometry, computational bioinformatics, and many more approaches.4 For the most part, the discovery of novel technologies, the development of new infrastructures, along with the training of budding scientists have reinforced this evolution.1,4,129,130 But the transition is still not complete, and roadblocks still exist on the path to scientific progress, for example, combining different data into a shared database that can be intrinsically used to understand how Omps located in the outer membrane of Gram-negative bacteria are able to filter molecular influx.24 The imperative need for new, effective Gram-negative antibacterial drugs comes at a time when techniques needed for innovative assays can provide significant crucial data over understanding the effective bottleneck.4 Ideally, the overall penetration–efflux puzzle4 will form part of a larger understanding of the Gram-negative cell envelope as well as direction on how to create small molecules that can easily penetrate across the outer membranes.4 This information should move the antibacterial research community toward more rational approaches, which may enable the delivery of new agents to treat life-threatening infections.1,4,129,130

Conclusive remarks

This review summarizes the progressive scientific evidence explaining the role of Omps in membrane permeability of Gram-negative bacteria. The control of bacterial membrane permeability is a complex process that is strongly structured by an intricate network of arrangements that senses and retorts to pH, osmotic shock, temperature, and external chemical stress. Bacteria majorly make use of cultured regulated cascades that perceive and distinguish toxic compounds and respond through various resistance mechanisms including regulation of Omps.6,7,15,18,22 The information on the role of effective Omps in substrate uptake and their structural relationship associated with their role in transport highlights the efforts of the scientific upfront in the direction of understanding the bacterial resistance.6,7,15,18,22 Translocation across the Omps can be assumed as the first step in the journey of an antibiotic along the defined pathway toward its target. Consequently, interpretation of antibiotic translocation through porins at the molecular level is crucial for understanding the correlation between influx and antibiotic activities within bacteria. The function of the general diffusion pores has been well studied based on pore characteristics, chemical modification, and genetic mutations. Our understanding of the structure of the pore-forming complex has tremendously improved over the last decade with the emergence of MS, state-of-the-art X-ray data, mass spectrometry assay protocols, and novel high-resolution experimental approaches including electrophysiology. However, a better understanding of the transportation mechanism by outer membrane pores is required. The molecular basis of the antibiotic transport via specific porins is still completely open at present, and further rigorous studies are needed to give insight into the structure–activity relationship of pores associated with antibiotic transport. The data computed for these Omps can be further employed to elucidate the antibiotic uptake pathway through Omps at molecular level, which could possibly empower rational drug design to further enhance permeation and support novel strategies to dodge “impermeability”-mediated resistance mechanism.