A versatile platform for precise synthesis of asymmetric molecular brush in one shot.

Asymmetric molecular brushes emerge as a unique class of nanostructured polymers, while their versatile synthesis keeps a challenge for chemists. Here we show the synthesis of well-defined asymmetric molecular double-brushes comprising two different side chains linked to the same repeat unit along the backbone by one-pot concurrent atom transfer radical polymerization (ATRP) and Cu-catalyzed azide/alkyne cycloaddition (CuAAC) reaction. The double-brushes are based on a poly(Br-acrylate-alkyne) homopolymer possessing an alkynyl for CuAAC reaction and a 2-bromopropionate initiating group for ATRP in each repeat unit. The versatility of this one-shot approach is demonstrated by CuAAC reaction of alkynyl/poly(ethylene oxide)-N3 and ATRP of various monomers. We also show the quantitative conversion of pentafluorophenyl ester groups to amide groups in side chains, allowing for the further fabrication of diverse building blocks. This work provides a versatile platform for facile synthesis of Janus-type double-brushes with structural and functional control, in a minimum number of reactions.Producing well-defined polymer compositions and structures facilitates their use in many different applications. Here the authors show the synthesis of well-defined asymmetric double-brushes by a one-pot concurrent atom transfer radical polymerization and Cu-catalyzed Click reaction.

Introduction

As an important topic in pan class="Chemical">polymer science, the synthesis of n>n class="Chemical">polymers with well-defined compositions and structures has attracted significant attention over the past several decades[1, 2]. Numerous complex polymers with well-organized architectures such as multiblock[3], star[4] and comblike[5] polymers have been developed, due to their extensive applications from engineering materials to medical devices[6, 7]. Among these complex polymers, molecular brushes represent a special type of polymers, in which multiple polymeric chains are densely attached to a linear polymer backbone, i.e., every repeat unit of the linear polymeric backbone possesses an attached polymeric side chain[8, 9]. Because of their compact branched structure and persistent cylindrical shape, such polymers have emerged as a unique class of nanostructured polymers[10-12]. Along with their structures, molecular brushes are attractive candidates for a variety of applications, including pH-sensitive probes[13], molecular pressure sensors[14] and smart surface coatings[15]. Recently, asymmetric molecular brushes, bearing different dense side chains attached to the polymeric backbone, have emerged[16-19]. Because of their special structures and strong intramolecular interaction of different side chains, such asymmetric molecular brushes exhibit very different properties in comparison with ordinary molecular brushes, and can be employed as nanostructured materials and giant surfactants[20-24].

Molepan class="Chemical">cular n>n class="Chemical">brushes can be constructed via the grafting-from[25-27] and grafting-onto[28-30] approaches from a pre-formed polymeric backbone, or the grafting-through[31, 32] method using a macromonomer. The grafting-from strategy has been the most popular method for constructing well-defined molecular brushes, often with initiating groups for controlled radical polymerization on the pre-formed polymer. In contrast, the grafting-onto method is rarely employed since it often leads to a relatively low grafting density. Gao and Matyjaszewski[32] showed that this limitation could be overcome by the use of thin linear poly(ethylene oxide)-N3 (PEO-N3) chains (M n = 775 g mol−1) to couple with poly(2-hydroxyethyl methacrylate)-alkyne (PHEMA-alkyne) and obtained molecular brushes with a high grafting density (88%).

A special case of asymmetric molepan class="Chemical">cular n>n class="Chemical">brushes are those in which two polymers of different composition are attached to each repeat unit along the main chain. One can think of these as Janus bottle brush polymers (asymmetric molecular double-brushes)[33-35]. The identical distribution of hetero-brushes along the backbone of asymmetric molecular double-brush could facilitate the self-assembly and allow access to diverse morphologies that are difficult to achieve for traditional asymmetric molecular brushes[36]. Moreover, with numerous amphiphilic junctions per macromolecule, asymmetric molecular double-brushes can be used as stabilizers of biphasic systems and hydrophobic solutes via noncovalent interactions, and Janus nanomaterials[24, 37]. However, there is very few robust method for efficient synthesis of such polymers due to their inherently challenging synthesis. Even so, some intelligent multi-step methods have been developed for the construction of asymmetric molecular double-brushes. Cheng et al. used the grafting-through approach to synthesize a series of polymers in which each repeat unit carried both a polystyrene (PS) and a polylactide (PLA) side chains. They used ring-opening metathesis polymerization (ROMP) to polymerize a PS-norbornene-PLA diblock macromonomer, which was first prepared in one-pot from a multifunctional agent bearing a hydroxyl as an initiating site for PLA and a trithiocarbonate functionality for reversible addition-fragmentation chain transfer (RAFT) polymerization of styrene[18]. Xie et al. also used a ROMP-based grafting-through approach to prepare an asymmetric polynorbornene brush with poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and poly(ε-caprolactone) (PCL) side chains based on a heterotrifunctional inimer possessing two initiating sites (OH and Br) for ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP)[38]. Zhao et al. prepared asymmetric molecular brushes based on a poly(glycidyl methacrylate) backbone with PEO and poly(styrene-b-N-isopropylacrylamide) (PS-b-PNIPAM) side chains[39]. The epoxy groups in the backbone were transformed to introduce azide groups for click coupling to install a RAFT agent and hydroxyls to which PEO side chains were grafted by esterification, and PS-b-PNIPAM side chains were then formed by RAFT polymerization.

One should note that two of these reports were limited to pan class="Chemical">polynorbornene backbones obtained via ROMP in which the macromonomer required multiple n>n class="Chemical">steps for its synthesis. These included ROP of cyclic monomers to introduce PLA or PCL. One could in principle modify the norbornene monomer with polymers produced by RAFT or ATRP, but this would require even more synthetic steps. The third report described poly(glycidyl methacrylate) generated by ATRP, but then several synthetic steps were needed to introduce the PEO and PS-b-PNIPAM side chains. It remains a challenge to synthesize a variety of different asymmetric molecular brushes with pairs of different polymers attached to each repeat unit.

Here we report a highly efficient pan class="Chemical">strategy for synthesizing Janus-type well-defined asymmetric molen>n class="Chemical">cular double-brushes. By this way, one can construct a variety of different Janus-type asymmetric molecular double-brushes (double-brush copolymers) using a minimum number of reactions, without a need for subsequent polymeric functionality transformations. These polymers can be prepared with controlled molecular weights and narrow molecular weight distributions.

Results

Synthetic route for asymmetric molecular double-brushes

In designing our synthesis pan class="Chemical">strategy, we envisioned a bifunctional homopan class="Chemical">polymer precursor with an alkynyl in each repeat unit for a grafting-onto reaction and an ATRP-initiating group in each repeat unit for grafting-from polymerizations. The Cu-catalyzed azide/alkyne cycloaddition (CuAAC) click reaction is well-known as a highly efficient coupling reaction with a high tolerance of functionality and insensitivity to various solvents[40]. ATRP is a versatile polymerization technique that allows the preparation of molecular brushes with controlled architecture, predictable degree of polymerization and narrow molecular weight distribution[41]. Since that both ATRP and CuAAC reaction employ the very similar catalytic systems, we hypothesize that the combination of ATRP and CuAAC click reaction could be utilized to directly synthesize asymmetric molecular brushes in a one-shot system[42, 43], that is to say, the copper(I)/ligand could mediate two different reactions (ATRP and CuAAC coupling) simultaneously for a concerted synthesis of asymmetric molecular brushes.

In this work, a very special homopan class="Chemical">polymer precursor, poly(Br-acrylate-alkyne), is constructed in the first step (Supplementary Fig. 1). The repeat unit in backbone has a 2-bromopropionate initiating group for ATRP as well as an alkynyl for click coupling. We show that in the second step, two independent polymeric chains can be attached to each repeat unit by simultaneous (one-shot) Cu-catalyzed ATRP and CuAAC click coupling reaction (Fig. 1). This is a polymeric analog of a bifunctional small molecule agent, in which a block copolymer consisting of two different polymeric chains can be generated in a single pot reaction.

Fig. 1

Construction of asymmetric molecular double-brushes. Synthetic route of PA-g-PEA/PEO, PA-g-PDMAEA/PEO, PA-g-PS/PEO and PA-g-PPFMA/PEO asymmetric molecular double-brushes in one-shot system via the combination of ATRP and CuAAC click reaction

Conpan class="Chemical">struction of asymmetric molen>n class="Chemical">cular double-brushes. Synthetic route of PA-g-PEA/PEO, PA-g-PDMAEA/PEO, PA-g-PS/PEO and PA-g-PPFMA/PEO asymmetric molecular double-brushes in one-shot system via the combination of ATRP and CuAAC click reaction

Synthesis of Br-acrylate-alkyne trifunctional monomer

The trifunctional pan class="Chemical">acrylate monomer, which we refer to n>n class="Chemical">Br-acrylate-alkyne (BAA), was synthesized in four steps (Supplementary Fig. 1). In the first step, we used a Baylis-Hillman reaction to introduce a hydroxymethyl into tert-butyl acrylate (tBA) to obtain tert-butyl (2-hydroxymethyl)acrylate. Next, the hydroxymethyl was converted to a 2-bromopropyl ester via carbodiimide coupling to yield the tert-butyl 2-((2-bromo-propanoyloxy)methyl)acrylate (tBBPMA) 1 monomer[44]. Then the tert-butoxycarbonyl was hydrolyzed to the carboxyl using CF3COOH in dichloromethane at ambient temperature, followed by esterification reaction with propargyl bromide in DMF to afford the target Br-acrylate-alkyne monomer 3. The chemical structure of monomer 3 was characterized by 1H (Supplementary Fig. 2A) and 13C (Supplementary Fig. 3) NMR. The resonance signals of the double bond appeared at 6.00 and 6.48 p.p.m. (1H NMR), and 129.0 and 134.1 p.p.m. (13C NMR), respectively. The peaks located at 4.42 and 2.50 p.p.m. belonged to 1 proton of CHBr and 1 proton of alkynyl, respectively, which demonstrated the introduction of corresponding functionalities for ATRP and CuAAC click reaction. Thus, these points clearly demonstrate the successful synthesis of Br-acrylate-alkyne monomer.

Preparation of poly(Br-acrylate-alkyne) bifunctional macro-agent

The pan class="Chemical">polymer with bifunctional repn>n class="Chemical">eat units [poly(Br-acrylate-alkyne) (PBAA) 4] was synthesized by RAFT polymerization of the monomer 3 in toluene at 70 °C using 2,2’-azobis(isobutyronitrile) (AIBN) as the initiator and cumyl dithiobenzoate (CDB) as the chain transfer agent (CTA). We intentionally limited the extent of monomer conversion to avoid any possible chain coupling or crosslinking, with a final polymer yield on the order of 60%. Then the dithiobenzoate end group was removed by AIBN at 65 °C[45]. Two well-defined samples of PBAA 4 were obtained (Supplementary Table 1) with narrow molecular weight distributions (4a: M n  = 3100 g mol−1, M w/M n = 1.28, degree of polymerization (DP): 11; 4b: M n  = 7900 g mol−1, M w/M n = 1.30, DP: 21). Both gel permeation chromatography (GPC) curves showed a unimodal and symmetrical elution peak (Supplementary Fig. 4), indicative of right choice of CDB as CTA to mediate RAFT polymerization of monomer 3.

pan class="Chemical">Polymer 4 was characterized by n>n class="Chemical">1H NMR (Supplementary Fig. 2B) and Fourier transform infrared (Fig. 2a). The proton resonance signal of the double bond (5.00–7.00 p.p.m.) disappeared after polymerization, and the signal of two protons of -CH 2C- in the polyacrylate backbone appeared at 2.09 p.p.m., confirming the successful polymerization of monomer 3. The peak d at 4.25 p.p.m. in the 1H NMR spectrum of polymer 4 is attributed to one proton of O2COCH(CH3)Br moiety and the resonance signal of one proton of alkynyl is located at 2.62 p.p.m. (peak c). These signals show that both the ATRP-initiating sites and click reaction sites were preserved during the RAFT polymerization. The RAFT polymerization mechanism is also verified by the minor peaks between 7.15 and 7.36 p.p.m. corresponding to five protons of the terminal phenyl originating from the CTA of CDB. Using this signal, the absolute degree of polymerization of monomer 3 and the molecular weight (M n,NMR) can be estimated, as summarized in Supplementary Table 1. Further structural information of polymer 4 is available from the FT-IR spectrum. The signals at 3288 and 2127 cm−1 in FT-IR spectrum confirm the existence of the alkynyl in polymer 4. Taken together, these data support the formation of well-defined bifunctional macro-agent 4, which consists of an ATRP-initiating site and a CuAAC click reaction site in each repeat unit.

Fig. 2

Chemical structure of polymers. Fourier transform infrared (FT-IR) spectra of PBAA 4 (a), PEO-N3 (b) and PA-g-PEA/PEO 5 asymmetric molecular double-brush (c).

Chemical pan class="Chemical">structure of n>n class="Chemical">polymers. Fourier transform infrared (FT-IR) spectra of PBAA 4 (a), PEO-N3 (b) and PA-g-PEA/PEO 5 asymmetric molecular double-brush (c).

One-shot synthesis of asymmetric molecular double-brush

In our pan class="Chemical">polymer design, we envision n>n class="Chemical">Cu-catalyzed click coupling of a polymer to the pendant alkynyls in the repeat units simultaneous with ATRP polymerization from the 2-bromopropionate groups. To begin, we first constructed a polymeric azide. To simplify our experiments and to focus on the versatility of the ATRP polymerization, we began with the same PEO-N3 [32] as that used by Matyjaszewski et al.[32] to graft PEO onto a polymer backbone derived from PHEMA, and then extended our efforts to a longer PEO-N3. The azide-terminated PEO-N3 samples were obtained with a two-step protocol, starting with commercial PEO-OH (M n = 750 and 2000 g mol−1), and the presence of terminal azide was verified by the typical FT-IR signal at 2104 cm−1 (Fig. 2b).

The firpan class="Chemical">st one-shot dual reaction experiment used PBAA 4b as the macroinitiator and ethyl acrylate (EA) as the monomer in the ATRP polymerization. The ATRP of EA and the CuAAC click reaction of PEO-N3 with PBAA 4b were carried out at 60 °C in DMF, with the feeding ratios of [-N3]:[-C≡CH] of 4:1 and [EA]:[-Br] of 150:1 (see Supplementary Table 2). One should recall that in the macroinitiator [-C≡CH] = [-Br].

In this rpan class="Chemical">eaction, we wanted not only to monitor the incrpan class="Chemical">ease in molecular weight of the asymmetric molecular double-brush but also to monitor the extent of conversion of PEO-N3, which was present in excess. We could follow both processes by GPC through the use of a polystyrene internal standard (PS, M n = 3790 g mol−1). Since the PS internal standard would not participate in either reaction, it served as a reference for the elution peak of PEO-N3 (M n = 775 g mol−1). One can see in Fig. 3 that the four peaks of PEO-N3, the PS standard, the starting polymer 4b, and the asymmetric molecular double-brush do not overlap. Therefore, the percentage of PEO-N3 reacted could be calculated by comparing the normalized peak areas of PEO-N3 and PS before and after the reaction. In this example, ~23% of PEO-N3 reacted after 3 h (Supplementary Table 2), and thus we calculated that the extent of grafting of PEO side chains is 92% (Supplementary Table 2), similar to the value reported by Matyjaszewski et al.[32] (88%). We learn that almost all of the pendant alkynyls of PBAA 4b were coupled to PEO side chains via the CuAAC click reaction. In support of this conclusion, we found that the FT-IR signals of the alkynyl had disappeared (Fig. 2c).

Fig. 3

Monitoring of CuAAC click reaction. GPC traces of ATRP/CuAAC system for PA-g-PEA/PEO 5 asymmetric molecular double-brush before (red) and after (blue) the reaction, feeding ratio: [-N3]: [-C≡CH] = 4:1 and [EA]:[-Br] = 150:1, internal standard: PS (M n = 3790 g mol−1)

Monitoring of pan class="Chemical">CuAAC click reaction. GPC traces of ATRP/CuAAC system for PA-g-PEA/PEO 5 asymmetric molecular double-brush before (red) and after (blue) the reaction, feeding ratio: [-N3]: [-C≡CH] = 4:1 and [EA]:[-Br] = 150:1, internal standard: PS (M n = 3790 g mol−1)

To gain more underpan class="Chemical">standing of the kinetics of the n>n class="Chemical">CuAAC click reaction, we also repeated the reactions under similar conditions but for shorter times. After 1 h we found 52% conversion of the pendant alkynyls, and after 2 h we found 80% conversion (Supplementary Table 2). When we used PEO-N3 with longer PEO chain (M n = 2000 g mol−1), we found 68% conversion of the pendant alkynyls after 3 h and 76% conversion after 5 h. By varying the reaction time, we can control the extent of PEO grafting.

We also examined the kinetics of the pan class="Chemical">ATRP polymerization of EA. We used gas chromatography (GC) to monitor monomer conversion (see experiment details in Supplementary Methods). We found a linear plot of ln([M]0/[M]t) vs. time (Fig. 4a). This first-order polymerization kinetics is a typical characteristic of ATRP[46] and indicates a constant propagating radical concentration during the polymerization. This result indicates that the ATRP of EA can also be controlled in the current one-shot system. The combination of these observations indicates that the preparation of polyacrylate-g-poly(ethyl acrylate)/poly(ethylene oxide) (PA-g-PEA/PEO) 5 asymmetric molecular double-brush can be carried out with excellent control of the PEA side chain length. Control is in principle possible by varying either the reaction time or the initial feeding ratio of EA monomer to macro-agent 4. It also should be noted that because of the chain end fidelity of ATRP[46], the PEA side chains can be extended with other monomers suitable for ATRP to yield block side chains.

Fig. 4

ATRP kinetics. Kinetic plot for ATRP of EA a, DMAEA b, St c and PFMA d initiated by PBAA 4b

pan class="Chemical">ATRP kinetics. Kinetic plot for pan class="Chemical">ATRP of EA a, DMAEA b, St c and PFMA d initiated by PBAA 4b

We next reppan class="Chemical">eated this chemin>n class="Chemical">stry using methyl methacrylate (MMA) as the monomer. On one hand, we wanted to establish the generality of the ATRP reaction for polymer 4. In addition, we used this reaction to learn about the initiation efficiency of the ATRP reaction. The initiation efficiency of ATRP is normally evaluated by NMR. In the case of the polymerization of EA, the 1H NMR signal of the CH2CHBr end group of PEA side chain (~4.30 p.p.m.) overlapped with other signals so that it was difficult to determine the initiation efficiency. With MMA as the monomer, we examined the asymmetric molecular double-brush by 13C NMR. Here we found complete disappearance of the CH3 CHBr signal at 40.1 p.p.m. that was present in the PBAA 4b macro-agent. In its place, we could detect the CH2 C(CH3)Br signal for the group at the end of PMMA chain. Thus, within the limits of signal integration in the 13C NMR measurements, we infer complete conversion of the ATRP-initiating groups in the MMA reaction. By analogy, we deduce nearly complete CH2CHBr initiation for the ATRP of EA in the preceding example. Further evidence for this conclusion is provided by the absence of a shoulder or significant tailing in the GPC curve of PA-g-PEA/PEO 5.

The purified product, which we refer to as pan class="Chemical">PA-g-PEA/n>n class="Chemical">PEO 5, was characterized by GPC and 1H NMR. The GPC curve of PA-g-PEA/PEO 5 shows a unimodal and symmetrical elution peak (dark cyan line in Fig. 5) with a higher molecular weight (M n = 130,400 g mol−1) compared to that of PBAA 4b (M n = 7900 g mol−1) and a narrow molecular weight distribution (M w/M n = 1.18), indicative of the negligible side reactions such as intermolecular coupling reactions[47]. In the present work, we used a high feeding ratio of EA to the ATRP-initiating group (150:1) to suppress possible intermolecular coupling, and we used a relatively high feeding ratio of azide functionality to alkyne (4:1) to improve the efficiency of CuAAC coupling reaction.

Fig. 5

Molecular weight of precursor and double-brushes. GPC traces of PBAA 4b macro-agent, PA-g-PEA/PEO 5, PA-g-PDMAEA/PEO 6, PA-g-PS/PEO 7 and PA-g-PPFMA/PEO 8 asymmetric molecular double-brushes in tetrahydrofuran (THF)

Molepan class="Chemical">cular weight of precursor and double-brushes. GPC traces of PBAA 4b macro-agent, PA-g-PEA/PEO 5, PA-g-PDMAEA/PEO 6, PA-g-PS/PEO 7 and PA-g-PPFMA/PEO 8 asymmetric molecular double-brushes in tetrahydrofuran (THF)

Figure 6 shows the pan class="Chemical">1H NMR spectrum of n>n class="Chemical">PA-g-PEA/PEO 5 and all proton resonance signals of both PEO and PEA side chains appear in the spectrum. The signals at 3.31 (peak d) and 3.58 (peak e) p.p.m. originate from the OCH 3 end group and OCH 2CH 2 repeat unit in PEO side chains, respectively. The signals at 0.85, 1.08, 1.21 (peak a) and 2.24 (peak c) p.p.m. correspond to three protons of CO2CH2CH 3 and two protons of CH2CH in PEA side chains, respectively. Therefore, the mean number of EA repeat units (m) in PEA side chain can be estimated from the integration areas of peak d (S d) and c (S c). From Eq. 1 (where 92% represents the grafting extent of PEO side chains), we calculate a mean degree of polymerization of 46 EA units per PEA chain. Thus the absolute molecular weight (M n,NMR) can be calculated according to Eq. 2 (where 6000 is the M n,NMR value of PBAA 4b (Supplementary Table 1), 21 is the DP of monomer 3 in PBAA 4b (Supplementary Table 1), 100 and 775 are the molecular weights of EA monomer and PEO-N3). The value is 117,800 g mol−1, much different from that obtained from GPC (130,400 g mol−1), which may be attributed to the complex branch structure[48].

Fig. 6

Chemical structure of asymmetric molecular double-brush. 1H NMR spectrum of PA-g-PEA/PEO 5 asymmetric molecular double-brush in CD2Cl2

Chemical pan class="Chemical">structure of asymmetric molen>n class="Chemical">cular double-brush. 1H NMR spectrum of PA-g-PEA/PEO 5 asymmetric molecular double-brush in CD2Cl2

These results verify the successful one-shot synthesis of a well-defined pan class="Chemical">PA-g-PEA/n>n class="Chemical">PEO 5 asymmetric molecular double-brush possessing dense PEO and PEA side chains linked to each repeat unit along the polymeric backbone, with a nearly complete ATRP initiation efficiency and a very high grafting efficiency of PEO side chains.

Construction of asymmetric molecular double-brushes with other monomers

Compared to previous synthetic protocols[38, 39] for asymmetric molepan class="Chemical">cular n>n class="Chemical">brushes, the current system starting from PBAA 4 is simple and versatile because well-defined asymmetric molecular double-brushes can be obtained in only one step without polymeric functionality transformations, just using four reagents (macro-agent 4, ATRP monomer, PEO-N3, and catalyst: copper(I)/ligand).

We tepan class="Chemical">sted the versatility of this n>n class="Chemical">platform to prepare diverse asymmetric molecular double-brushes by examining the ATRP of various monomers (2-(dimethylamino)ethyl acrylate (DMAEA), styrene (St) and pentafluorophenyl methacrylate (PFMA)) under similar conditions (Table 1). Here DMAEA is a N-containing hydrophilic acrylate monomer, styrene is a widely used vinyl monomer, and PFMA is an efficient building block for post-polymerization functionalization. Using a constant initial feeding ratio of PEO-N3 to alkynyl (4:1), the grafting extent of PEO side chain of different asymmetric molecular double-brushes was significantly influenced by the temperature. We used a reaction temperature of 40 °C for the preparation of polyacrylate-g-poly((2-(dimethylamino)ether acrylate)/poly(ethylene oxide) (PA-g-PDMAEA/PEO) 6, and 80 °C for the preparation of polyacrylate-g-polystyrene/poly(ethylene oxide) (PA-g-PS/PEO) 7 and polyacrylate-g-poly(pentafluorophenyl methacrylate)/poly(ethylene oxide) (PA-g-PPFMA/PEO) 8. Because of the high efficiency of CuAAC click reaction at 60 °C, we only monitored the conversion of PEO-N3 for the preparation of PA-g-PDMAEA/PEO 6 at a lower temperature of this reaction. Even at 40 °C, the CuAAC click reaction maintained a high efficiency: the conversion of PEO-N3 was 20% within 4 h and the grafting extent of PEO side chain of PA-g-PDMAEA/PEO 6 was as high as 80%, still comparable with that of simple molecular brushes[32].

Table 1

Synthesis of asymmetric molecular double-brushesa

Entry	Monomer	Temperature (oC)	Time (h)	M n,GPC f (g mol−1)	M w/M n f	m g	M n,NMR h (g mol−1)
5 b	EA	60	3.0	130,400	1.18	46	117,800
6 c	DMAEA	40	4.0	55,900	1.31	24	91,000
7 d	St	80	4.0	67,900	1.28	29	85,700
8 e	PFMA	80	5.0	14,600	1.20	10	75,200

aPBAA 4b: M n,GPC = 7900 g mol−1, M w/M n = 1.30; PEO-N3: M n = 775 g mol−1, solvent: DMF

bFeeding ratio: [EA]:[-N3]:[-Br]:[CuBr]:[PMDETA] = 150:4:1:2:2, [-C≡CH] = [-Br], reaction time: 3 h

cFeeding ratio: [DMAEA]:[-N3]: [-Br]:[CuBr]:[HMTETA] = 200:4:1:2:2, [-C≡CH] = [-Br], reaction time: 4 h

dFeeding ratio: [St]:[-N3]:[-Br]:[CuBr]:[HMTETA] = 200:4:1:2:2, [-C≡CH] = [-Br], reaction time: 4 h

eFeeding ratio: [PFMA]:[-N3]:[-Br]:[CuBr]:[PMDETA] = 150:4:1:2:2, [-C≡CH] = [-Br], reaction time: 5 h

fMeasured by GPC at 35 °C in THF. gThe number of repeated unit per side chain (PEA, PDMAEA, PS and PPFMA) obtained from 1H NMR. hObtained from 1H NMR

Synthesis of asymmetric molepan class="Chemical">cular double-n>n class="Chemical">brushesa

aPpan class="Chemical">BAA 4b: M n,GPC = 7900 g mol−1, M w/M n = 1.30; pan class="Chemical">PEO-N3: M n = 775 g mol−1, solvent: DMF

bFeeding ratio: [pan class="Chemical">EA]:[-N3]:[-n>n class="Chemical">Br]:[CuBr]:[PMDETA] = 150:4:1:2:2, [-C≡CH] = [-Br], reaction time: 3 h

cFeeding ratio: [pan class="Chemical">DMAEA]:[-N3]: [-n>n class="Chemical">Br]:[CuBr]:[HMTETA] = 200:4:1:2:2, [-C≡CH] = [-Br], reaction time: 4 h

dFeeding ratio: [pan class="Chemical">St]:[-N3]:[-n>n class="Chemical">Br]:[CuBr]:[HMTETA] = 200:4:1:2:2, [-C≡CH] = [-Br], reaction time: 4 h

eFeeding ratio: [pan class="Chemical">PFMA]:[-N3]:[-n>n class="Chemical">Br]:[CuBr]:[PMDETA] = 150:4:1:2:2, [-C≡CH] = [-Br], reaction time: 5 h

fMpan class="Chemical">easured by GPC at 35 °C in n>n class="Chemical">THF. gThe number of repeated unit per side chain (PEA, PDMAEA, PS and PPFMA) obtained from 1H NMR. hObtained from 1H NMR

Moreover, pan class="Chemical">PA-g-PDMAEA/n>n class="Chemical">PEO 6, PA-g-PS/PEO 7 and PA-g-PPFMA/PEO 8 all show unimodal and symmetrical elution peaks in the GPC curves (Fig. 5), with low polydispersities ( ≤ 1.31) and much higher molecular weights compared to that of macro-agent 4b. PA-g-PDMAEA/PEO 6, PA-g-PS/PEO 7 and PA-g-PPFMA/PEO 8 were characterized by 1H NMR, 13C NMR and FT-IR (see Supplementary Information). Supplementary Figs. 5–7 present the 1H NMR spectra of PA-g-PDMAEA/PEO 6, PA-g-PS/PEO 7 and PA-g-PPFMA/PEO 8, respectively, displaying all proton resonance signals of both EO and ATRP monomer (DMAEA, St or PFMA) repeat units. The conversion of the ATRP monomer at appropriate time intervals was also measured by GC, which revealed that the ATRP of DMAEA, St and PFMA in the one-shot system all obeyed a first-order rate law (Fig. 4b–d). In short, this one-shot synthesis protocol shows the robust nature in direct synthesis of asymmetric molecular brushes via ATRP of various monomers.

Post-polymerization modification of PA-g-PPFMA/PEO

Despite the robupan class="Chemical">st nature of n>n class="Chemical">ATRP toward the direct polymerization of various monomers, the current one-shot system is obviously not suitable for monomers potentially incompatible with ATRP process or monomers that require special ATRP conditions[49]. Here, post-polymerization modification can be used effectively to obtain these functional polymers[50]. PPFMA[51, 52] has been widely used as an efficient building block for polymer post functionalization. It reacts quantitatively with amines under mild conditions and the reaction can be monitored by 19F NMR. Encouraged by contributions from the Theato group[51, 52], we hypothesized that this chemistry could be employed as a supplementary platform for indirect synthesis of more asymmetric molecular double-brushes by using PFMA monomer for ATRP.

In the pan class="Chemical">current case, we examined the aminolysis of n>n class="Chemical">PA-g-PPFMA/PEO 8 with benzylamine at 50 oC in tetrahydrofuran (THF) (Supplementary Fig. 8), and monitored the reaction by 19F NMR. It can be seen in Fig. 7a that the typical resonance signals corresponding to PPFMA side chains disappeared after the aminolysis (blue line), while only the signals attributed to pentafluorophenol appeared after the reaction, confirming the complete removal of pentafluorophenyl ester groups. The introduction of benzyl was demonstrated by1H NMR, in which a new signal originating from five protons of -C6 H 5CH2 in the N-benzyl methacrylamide (BMAm) repeat unit appeared at 7.25 p.p.m. (peak d of blue line) after the aminolysis (Fig. 7b). The 1H NMR spectrum after the aminolysis (blue line in Fig. 7b) also shows that the signals of PEO side chains were preserved during the aminolysis reaction.

Fig. 7

Monitoring of the aminolysis reaction. 19F (a) and 1H (b) NMR spectra of PA-g-PPFMA/PEO 8/benzylamine system before (red) and after (blue) the reaction in CD2Cl2

Monitoring of the aminolysis rpan class="Chemical">eaction. n>n class="Chemical">19F (a) and 1H (b) NMR spectra of PA-g-PPFMA/PEO 8/benzylamine system before (red) and after (blue) the reaction in CD2Cl2

The product of aminolysis, pan class="Chemical">polyacrylate-g-poly(N-benzyl methacrylamide)/n>n class="Chemical">poly(ethylene oxide) (PA-g-PBMAm/PEO) 9, shows a unimodal and symmetrical elution peak by GPC (Supplementary Fig. 9) with a similar molecular weight and a similar molecular weight distribution compared to that of PA-g-PPFMA/PEO 8. This result also affirms that the polymeric skeleton was retained during the aminolysis. It is worthy noting that the product of the modification has poly(meth)acrylamide side chains, not poly(meth)acrylate side chains, demonstrating that aminolysis of PPFMA side chains can be an alternative for introducing diverse poly(meth)acrylamide side chains into the brush copolymer. This post-polymerization modification strategy based on PA-g-PPFMA/PEO enables a facile and efficient approach under mild conditions for affording a broader range of asymmetric molecular brushes not limited to poly(meth)acrylate side chains, without affecting PEO side chains or the backbone.

Discussion

We have presented a facile synthesis of well-defined asymmetric molepan class="Chemical">cular double-brushes with controlled architecture and narrow molecular weight distributions (M w/M n ≤ 1.31). On the basis of the preparation of PBAA, a bifunctional macro-agent consisting of two different active sites (alkynyl and Br), a series of asymmetric molecular double-brushes was synthesized in a one-shot system by concurrent grafting-from via ATRP and a highly efficient grafting-onto via CuAAC click coupling. The ATRP allowed precise size control in the side chains via the reaction time and feeding ratio, whereas the extent of CuAAC click grafting could be controlled via the reaction time. The combination of the versatility of ATRP and the high efficiency of CuAAC click reaction can meet the demand for the synthesis of complex polymeric materials and significantly broaden the library of accessible polymer structures, either asymmetric or symmetric molecular double-brush polymers. More importantly, we demonstrate the possibility of post-polymerization modification of asymmetric molecular double-brushes possessing pentafluorophenyl ester groups in the side chains. This approach allows for further precise fabrication of a broad variety of polymer building blocks in which one avoids the direct ATRP of monomers that are difficult to polymerize or require special polymerization conditions.

In supan class="Chemical">mmary, this work not only reveals the excellent compatibility between copper-catalyzed ATRP and CuAAC click reactions, but provides a versatile platform for the facile synthesis of complex asymmetric molecular brushes with precise structure and functionality control, in a minimum number of reaction steps and reactants, without polymeric functionality transformations.

Data availability

The authors declare that the data supporting the findings of pan class="Chemical">current work are available within the paper and its Supplementary Information files, and also are available from the authors upon rn>n class="Chemical">easonable request.