Literature DB >> 28814013

A third arm - Design of a bypass prosthesis enabling incorporation.

Adam W Wilson, Daniel H Blustein, Jon W Sensinger.   

Abstract

A variety of factors affect the performance of a person using a myoelectric prosthesis, including increased control noise, reduced sensory feedback, and muscle fatigue. Many studies use able-bodied subjects to control a myoelectric prosthesis using a bypass socket in order to make comparisons to movements made with intact limbs. Depending on the goals of the study, this approach can also allow for greater subject numbers and more statistical power in the analysis of the results. As we develop assessment tools and techniques to evaluate how peripheral nerve interfaces impact prosthesis incorporation, involving normally limbed subjects in the studies becomes challenging. We have designed a novel bypass prosthesis to allow for the assessment of prosthesis incorporation in able-bodied subjects. Incorporation of a prosthetic hand worn by a normally limbed subject requires that the prosthesis is a convincing, functional extension of their own body. We present the design and development of the bypass prosthesis with special attention to mounting position and angle of the prosthetic hand, the quality of the control system and the responsiveness of the feedback. The bypass prosthesis has been fitted with a myoelectrically-controlled hand that has been instrumented to measure the forces applied to the thumb, index, and middle fingers. The prosthetic hand was mounted on the bypass socket such that it is the same length as the subject's intact limb but at a medial rotation angle of 20° to prevent visual occlusion of the prosthetic hand. Force feedback is provided in the form of electrical stimulation, vibration, or force applied to the intact limb with milliseconds of delay. Preliminary data results from a cross-modal congruency task are included showing evidence of prosthesis incorporation in able-bodied subjects. This bypass will allow able-bodied subjects to participate in research studies that require the use of a prosthetic limb while also allowing the subjects to sense that the prosthesis is an extension of the body.

Entities:  

Mesh:

Year:  2017        PMID: 28814013     DOI: 10.1109/ICORR.2017.8009441

Source DB:  PubMed          Journal:  IEEE Int Conf Rehabil Robot        ISSN: 1945-7898


  5 in total

1.  Assessing the quality of supplementary sensory feedback using the crossmodal congruency task.

Authors:  Daniel Blustein; Adam Wilson; Jon Sensinger
Journal:  Sci Rep       Date:  2018-04-18       Impact factor: 4.379

2.  Improving internal model strength and performance of prosthetic hands using augmented feedback.

Authors:  Ahmed W Shehata; Leonard F Engels; Marco Controzzi; Christian Cipriani; Erik J Scheme; Jonathon W Sensinger
Journal:  J Neuroeng Rehabil       Date:  2018-07-31       Impact factor: 4.262

3.  Comparison of DEKA Arm and Body-Powered Upper Limb Prosthesis Joint Kinematics.

Authors:  Conor Bloomer; Kimberly L Kontson
Journal:  Arch Rehabil Res Clin Transl       Date:  2020-04-25

4.  Myoelectric prosthesis users and non-disabled individuals wearing a simulated prosthesis exhibit similar compensatory movement strategies.

Authors:  Heather E Williams; Craig S Chapman; Patrick M Pilarski; Albert H Vette; Jacqueline S Hebert
Journal:  J Neuroeng Rehabil       Date:  2021-05-01       Impact factor: 4.262

5.  Improving Fine Control of Grasping Force during Hand-Object Interactions for a Soft Synergy-Inspired Myoelectric Prosthetic Hand.

Authors:  Qiushi Fu; Marco Santello
Journal:  Front Neurorobot       Date:  2018-01-10       Impact factor: 2.650

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.