Literature DB >> 28782951

Rapid Simultaneous Removal of Toxic Anions [HSeO3]-, [SeO3]2-, and [SeO4]2-, and Metals Hg2+, Cu2+, and Cd2+ by MoS42- Intercalated Layered Double Hydroxide.

Lijiao Ma1, Saiful M Islam2, Chengliang Xiao2, Jing Zhao2, Hongyun Liu1, Mengwei Yuan1, Genban Sun1, Huifeng Li1, Shulan Ma1,2, Mercouri G Kanatzidis2.   

Abstract

We demonstrate fast, highly efficient concurrent removal of toxic oxoanions of Se(VI) (SeO42-) and Se(IV) (SeO32-/HSeO3-) and heavy metal ions of Hg2+, Cu2+, and Cd2+ by the MoS42- intercalated Mg/Al layered double hydroxide (MgAl-MoS4-LDH, abbr. MoS4-LDH). Using the MoS4-LDH as a sorbent, we observe that the presence of Hg2+ ions greatly promotes the capture of SeO42-, while the three metal ions (Hg2+, Cu2+, Cd2+) enable a remarkable improvement in the removal of SeO32-/HSeO3-. For the pair Se(VI)+Hg2+, the MoS4-LDH exhibits outstanding removal rates (>99.9%) for both Hg2+ and Se(VI), compared to 81% removal for SeO42- alone. For individual SeO32- (without metal ions), 99.1% Se(IV) removal is achieved, while ≥99.9% removals are reached in the presence of Hg2+, Cu2+, and Cd2+. Simultaneously, the removal rates for these metal ions are also >99.9%, and nearly all concentrations of the elements can be reduced to <10 ppb, a limit acceptable for drinking water. The maximum sorption capacities for individual Se(VI) and Se(IV) are 85 and 294 mg/g, respectively. The 294 mg/g capacity for Se(IV) reaches a record value, placing the MoS4-LDH among the highest-capacity selenite adsorbing materials described to date. More interestingly, the presence of metal ions extremely accelerates the capture of the selenium oxoanions because of the reactions of the metal ions with the interlayer MoS42- anions. The sorptions of Se(VI)+Hg and Se(IV)+M (M = Hg2+, Cu2+, Cd2+) are exceptionally rapid, showing >99.5% removals for Hg2+ within 1 min and ∼99.0% removal for Se(VI) within 30 min, as well as >99.5% removals for pairs Cu2+ and Se(IV) within 10 min, and Cd2+ and Se(IV) within 30 min. During the sorption of SeO32-/HSeO3-, reduction of Se(IV) occurs to Se0 caused by the S2- sites in MoS42-. Sorption kinetics for the oxoanions follows a pseudo-second-order model consistent with chemisorption. The intercalated material of MoS4-LDH is very promising as a highly effective filter for decontamination of water with toxic Se(IV)/Se(VI) oxoanions along with heavy metals such as Hg2+, Cd2+, and Cu2+.

Entities:  

Year:  2017        PMID: 28782951     DOI: 10.1021/jacs.7b07123

Source DB:  PubMed          Journal:  J Am Chem Soc        ISSN: 0002-7863            Impact factor:   15.419


  3 in total

Review 1.  A Review: Adsorption and Removal of Heavy Metals Based on Polyamide-amines Composites.

Authors:  Qian Wang; Sining Zhu; Chen Xi; Fan Zhang
Journal:  Front Chem       Date:  2022-03-04       Impact factor: 5.221

2.  Adsorption of divalent cadmium by calcified iron-embedded carbon beads.

Authors:  Yalin Cheng; Kaiqian Wang; Biyang Tu; Shan Xue; Jiahui Deng; Haisheng Tao
Journal:  RSC Adv       Date:  2020-02-10       Impact factor: 4.036

Review 3.  A critical analysis of sources, pollution, and remediation of selenium, an emerging contaminant.

Authors:  Habib Ullah; Lu Lun; Audil Rashid; Noor Zada; Baoliang Chen; Asfandyar Shahab; Ping Li; Muhammad Ubaid Ali; Siyi Lin; Ming Hung Wong
Journal:  Environ Geochem Health       Date:  2022-08-16       Impact factor: 4.898

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.