Fabrication of starch-graft-poly(acrylamide)/graphene oxide/hydroxyapatite nanocomposite hydrogel adsorbent for removal of malachite green dye from aqueous solution.

This article reports the efficient removal of malachite green (MG) dye from aqueous solution using a novel polysaccharide-based nanocomposite hydrogel adsorbent (NHA). The NHAs of different compositions were prepared through a simple free radical graft copolymerization of acrylamide (AM) monomer onto starch backbones in the presence of graphene oxide (GO) nano sheets and nono-hydroxyapatite (n-HAp). The surface morphology and chemical properties of the prepared NHAs were fully examined by using FTIR, SEM, TEM, XRD and TGA. The biocompatibility, biodegradability, porosity, water content and water uptake of the synthesized NHAs were also evaluated. The NHA was employed as bioadsorbents for the adsorption of MG dye. The temperature dependence data also revealed that MG sorption process was feasible, spontaneous and endothermic. The MG adsorption rates were described by the pseudo-second-order model. Furthermore, the adsorption isotherm data fitted well with the Langmuir isotherm model with a maximum adsorption capacity of 297mgg-1 for MG dye. The NHA also showed an excellent regeneration capacity after five consecutive cycles of dye adsorption-desorption. According to the results, the prepared NHAs could be environment friendly and promising adsorbents for the adsorption of different cationic dyes from contaminated water.