Literature DB >> 28747263

The validity and reliability of computed tomography orbital volume measurements.

Silviu C Diaconu1, David Dreizin2, Mehmet Uluer3, Corey Mossop4, Michael P Grant5, Arthur J Nam6.   

Abstract

PURPOSE: Orbital volume calculations allow surgeons to design patient-specific implants to correct volume deficits. It is estimated that changes as small as 1 ml in orbital volume can lead to enophthalmos. Awareness of the limitations of orbital volume computed tomography (CT) measurements is critical to differentiate between true volume differences and measurement error. The aim of this study is to analyze the validity and reliability of CT orbital volume measurements.
MATERIALS AND METHODS: A total of 12 cadaver orbits were scanned using a standard CT maxillofacial protocol. Each orbit was dissected to isolate the extraocular muscles, fatty tissue, and globe. The empty bony orbital cavity was then filled with sculpting clay. The volumes of the muscle, fat, globe, and clay (i.e., bony orbital cavity) were then individually measured via water displacement. The CT-derived volumes, measured by manual segmentation, were compared to the direct measurements to determine validity. RESULTS AND
CONCLUSIONS: The difference between CT orbital volume measurements and physically measured volumes is not negligible. Globe volumes have the highest agreement with 95% of differences between -0.5 and 0.5 ml, bony volumes are more likely to be overestimated with 95% of differences between -1.8 and 2.6 ml, whereas extraocular muscle volumes have poor validity and should be interpreted with caution.
Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Accuracy; CT; Enophthalmos; Orbit; Volume

Mesh:

Year:  2017        PMID: 28747263     DOI: 10.1016/j.jcms.2017.06.024

Source DB:  PubMed          Journal:  J Craniomaxillofac Surg        ISSN: 1010-5182            Impact factor:   2.078


  3 in total

Review 1.  New and emerging patient-centered CT imaging and image-guided treatment paradigms for maxillofacial trauma.

Authors:  David Dreizin; Arthur J Nam; Jeffrey Hirsch; Mark P Bernstein
Journal:  Emerg Radiol       Date:  2018-06-20

2.  The application of 3D-printed titanium mesh in maxillary tumor patients undergoing total maxillectomy.

Authors:  Bing-Yao Liu; Gang Cao; Zhen Dong; Wei Chen; Jin-Ke Xu; Ting Guo
Journal:  J Mater Sci Mater Med       Date:  2019-11-14       Impact factor: 3.896

3.  Commentary: Normative orbital measurement in Indian population.

Authors:  Suryasnata Rath
Journal:  Indian J Ophthalmol       Date:  2019-05       Impact factor: 1.848

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.