Literature DB >> 28745863

Sandwich-Type NbS2@S@I-Doped Graphene for High-Sulfur-Loaded, Ultrahigh-Rate, and Long-Life Lithium-Sulfur Batteries.

Zhubing Xiao1, Zhi Yang2, Linjie Zhang1, Hui Pan1, Ruihu Wang1.   

Abstract

Lithium-sulfur batteries practically suffer from short cycling life, low sulfur utilization, and safety concerns, particularly at ultrahigh rates and high sulfur loading. To address these problems, we have designed and synthesized a ternary NbS2@S@IG composite consisting of sandwich-type NbS2@S enveloped by iodine-doped graphene (IG). The sandwich-type structure provides an interconnected conductive network and plane-to-point intimate contact between layered NbS2 (or IG) and sulfur particles, enabling sulfur species to be efficiently entrapped and utilized at ultrahigh rates, while the structural integrity is well maintained. NbS2@S@IG exhibits prominent high-power charge/discharge performances. Reversible capacities of 195, 107, and 74 mA h g-1 (1.05 mg cm-2) have been achieved after 2000 cycles at ultrahigh rates of 20, 30, and 40 C, respectively, and the corresponding average decay rates per cycle are 0.022%, 0.031% and 0.033%, respectively. When the area sulfur loading is increased to 3.25 mg cm-2, the electrode still maintains a high discharge capacity of 405 mAh g-1 after 600 cycles at 1 C. Three half-cells in series assembled with NbS2@S@IG can drive 60 indicators of LED modules after only 18 s of charging. The instantaneous current and power of the device reach 196.9 A g-1 and 1369.7 W g-1, respectively.

Entities:  

Keywords:  lithium−sulfur batteries; polysulfides; sandwich-type structure; shuttle effect; ultrahigh rate

Year:  2017        PMID: 28745863     DOI: 10.1021/acsnano.7b04442

Source DB:  PubMed          Journal:  ACS Nano        ISSN: 1936-0851            Impact factor:   15.881


  6 in total

1.  A highly efficient double-hierarchical sulfur host for advanced lithium-sulfur batteries.

Authors:  Linyu Hu; Chunlong Dai; Jin-Myoung Lim; Yuming Chen; Xin Lian; Minqiang Wang; Yi Li; Penghao Xiao; Graeme Henkelman; Maowen Xu
Journal:  Chem Sci       Date:  2017-11-06       Impact factor: 9.825

2.  3D CNTs/Graphene-S-Al3Ni2 Cathodes for High-Sulfur-Loading and Long-Life Lithium-Sulfur Batteries.

Authors:  Zeqing Guo; Huagui Nie; Zhi Yang; Wuxing Hua; Chunping Ruan; Dan Chan; Mengzhan Ge; Xi'an Chen; Shaoming Huang
Journal:  Adv Sci (Weinh)       Date:  2018-05-10       Impact factor: 16.806

3.  Double-Shelled Phosphorus and Nitrogen Codoped Carbon Nanospheres as Efficient Polysulfide Mediator for High-Performance Lithium-Sulfur Batteries.

Authors:  Jin Wang; Hao Yang; Zhen Chen; Lili Zhang; Jilei Liu; Pei Liang; Hui Yang; Xiaodong Shen; Ze Xiang Shen
Journal:  Adv Sci (Weinh)       Date:  2018-09-08       Impact factor: 16.806

4.  Efficient Sulfur Host Based on Yolk-Shell Iron Oxide/Sulfide-Carbon Nanospindles for Lithium-Sulfur Batteries.

Authors:  Dongjiu Xie; Shilin Mei; Yaolin Xu; Ting Quan; Eneli Härk; Zdravko Kochovski; Yan Lu
Journal:  ChemSusChem       Date:  2021-02-02       Impact factor: 8.928

5.  Ni-CeO2 Heterostructures in Li-S Batteries: A Balancing Act between Adsorption and Catalytic Conversion of Polysulfide.

Authors:  Yang Kong; Xin Ao; Xiao Huang; Jinglong Bai; Shangquan Zhao; Jinyong Zhang; Bingbing Tian
Journal:  Adv Sci (Weinh)       Date:  2022-04-12       Impact factor: 17.521

6.  Ultrastable Sodium-Sulfur Batteries without Polysulfides Formation Using Slit Ultramicropore Carbon Carrier.

Authors:  Qiubo Guo; Shuang Li; Xuejun Liu; Haochen Lu; Xiaoqing Chang; Hongshen Zhang; Xiaohui Zhu; Qiuying Xia; Chenglin Yan; Hui Xia
Journal:  Adv Sci (Weinh)       Date:  2020-04-22       Impact factor: 16.806

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.