In Situ Formation of Microfibrillar Crystalline Superstructure: Achieving High-Performance Polylactide.

As a biobased and biodegradable polyester, polylactide (PLA) is widely applied in disposable products, biomedical devices, and textiles. Nevertheless, due to its inherent brittleness and inferior strength, simultaneously reinforcing and toughening of PLA without sacrificing its biodegradability is highly desirable. In this work, a robust assembly consisting of compact and well-ordered microfibrillar crystalline superstructure (FCS) surrounded by slightly oriented amorphism, is achieved by a combined external force field. Unlike the classic crystalline superstructures such as shish-kebabs, cylindrites, and lamellae, the newfound FCS with diameter of about 100 nm and length of several tens of micrometers is aggregated with well-aligned crystalline nanofibers. FCS can serve as discontinuous fiber to self-reinforce the amorphous PLA; more importantly, FCS can also act as rivets to pin the propagating fibrillar crazes leading to the formation of dense fibrillar crazes during stretching, which dissipates much energy and translates the failure of PLA from brittle to ductile. Consequently, PLA with FCS exhibits exceptionally simultaneous enhancement in ductility, strength, and stiffness, outperforming normal PLA with increments of 728, 55, and 70% in elongation at break, strength, and modulus, respectively. Therefore, FSC exhibits competitive advantages in achieving high-performance PLA even for other semicrystalline polymers. More significantly, this newfound crystalline superstructure (FCS) provides a new structural model to establish the correlation between structure and performance.