Literature DB >> 28702522

Band alignment investigations of heterostructure NiO/TiO2 nanomaterials used as efficient heterojunction earth-abundant metal oxide photocatalysts for hydrogen production.

Md T Uddin1, Y Nicolas2, C Olivier2, W Jaegermann3, N Rockstroh4, H Junge4, T Toupance2.   

Abstract

Earth-abundant NiO/anatase TiO2 heteronanostructures were prepared by a straightforward one-pot sol-gel synthetic route followed by a suitable thermal post-treatment. The resulting 0.1-4 wt% NiO-decorated anatase TiO2 nanoparticles were characterized by X-ray diffraction, electron microscopy, Raman and UV-visible spectroscopy and N2 sorption analysis, and showed both nanocrystallinity and mesoporosity. The careful determination of the energy band alignment diagram by a suitable combination of XPS/UPS and absorption spectroscopy data revealed significant band bending at the interface of the p-n NiO/anatase TiO2 heterojunction nanoparticles. Furthermore, these heterojunction photocatalysts exhibited an improved photocatalytic activity in H2 production by methanol photoreforming compared to pure anatase TiO2 and commercial P25. Thus, an average H2 production rate of 2693 μmol h-1 g-1 was obtained for the heterojunction of a 1 wt% NiO/anatase photocatalyst, which is one of the most efficient NiO/anatase TiO2 systems ever reported. An enhanced dissociation efficiency of the photogenerated electron-hole pairs resulting from an internal electric field developed at the interface of the NiO/anatase TiO2 p-n heterojunctions is suggested to be the reason of this enhanced photocatalytic activity.

Entities:  

Year:  2017        PMID: 28702522     DOI: 10.1039/c7cp01300k

Source DB:  PubMed          Journal:  Phys Chem Chem Phys        ISSN: 1463-9076            Impact factor:   3.676


  6 in total

Review 1.  Charge Carrier Processes and Optical Properties in TiO2 and TiO2-Based Heterojunction Photocatalysts: A Review.

Authors:  Stefano Lettieri; Michele Pavone; Ambra Fioravanti; Luigi Santamaria Amato; Pasqualino Maddalena
Journal:  Materials (Basel)       Date:  2021-03-27       Impact factor: 3.623

2.  A novel highly selective electrochemical chlorobenzene sensor based on ternary oxide RuO2/ZnO/TiO2 nanocomposites.

Authors:  Md Mahmud Alam; Muhammad Zobayer Bin Mukhlish; Ayesha Tazrin; Nahida Akter Jui; Abdullah M Asiri; Mohammed M Rahman; Md Akhtarul Islam; Md Tamez Uddin
Journal:  RSC Adv       Date:  2020-09-01       Impact factor: 4.036

3.  Surface Morphology-Dependent Functionality of Titanium Dioxide-Nickel Oxide Nanocomposite Semiconductors.

Authors:  Yuan-Chang Liang; Nian-Cih Xu; Kai-Jen Chiang
Journal:  Nanomaterials (Basel)       Date:  2019-11-21       Impact factor: 5.076

4.  Enhanced Photocatalytic Hydrogen Evolution from Water Splitting on Ta2O5/SrZrO3 Heterostructures Decorated with CuxO/RuO2 Cocatalysts.

Authors:  Ali Margot Huerta-Flores; Francisco Ruiz-Zepeda; Cavit Eyovge; Jedrzej P Winczewski; Matthias Vandichel; Miran Gaberšček; Nicolas D Boscher; Han J G E Gardeniers; Leticia M Torres-Martínez; Arturo Susarrey-Arce
Journal:  ACS Appl Mater Interfaces       Date:  2022-07-05       Impact factor: 10.383

5.  A Novel Approach to Enhance Mechanical and Thermal Properties of SLA 3D Printed Structure by Incorporation of Metal-Metal Oxide Nanoparticles.

Authors:  Suhail Mubarak; Duraisami Dhamodharan; Manoj B Kale; Nidhin Divakaran; T Senthil; Sathiyanathan P; Lixin Wu; Jianlei Wang
Journal:  Nanomaterials (Basel)       Date:  2020-01-27       Impact factor: 5.076

6.  Enhanced Mechanical and Thermal Properties of Stereolithography 3D Printed Structures by the Effects of Incorporated Controllably Annealed Anatase TiO2 Nanoparticles.

Authors:  Suhail Mubarak; Duraisami Dhamodharan; Nidhin Divakaran; Manoj B Kale; T Senthil; Lixin Wu; Jianlei Wang
Journal:  Nanomaterials (Basel)       Date:  2020-01-01       Impact factor: 5.076

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.