PURPOSE: To evaluate the antibacterial, mechanical and biocompatibility characteristics of an orthodontic adhesive that contains quaternary ammonium polyethyleneimine (QPEI) nanoparticles. MATERIALS AND METHODS: QPEI nanoparticles were added to an orthodontic adhesive at 0%, 1% and 1.5% wt/wt. Antibacterial activity was tested after aging for 14 days using the direct contact test (DCT). The degree of monomer conversion (DC) was measured using Fourier transform infrared (FTIR) spectroscopy. Shear bond atrength (SBS) was tested on the etched enamel of extracted human teeth. Biocompatibility was tested using keratinocyte and neutrophil cell lines in the XTT assay. RESULTS: The DCT results showed significant bacterial growth inhibition in the test group incorporating 1.5% wt/wt QPEI nanoparticles (p < 0.05). The DC of the 0%, 1%, and 1.5% wt/wt samples measured immediately and after 10 min was 62.2-71.0%, 59.1-68.7%, and 52.9-58.6%, respectively, and the average SBS were 9.25 MPa, 11.57 MPa, and 9.10 MPa, respectively. Keratinocyte and neutrophil viability did not change following the addition of QPEI to the orthodontic adhesives. CONCLUSIONS: The incorporation of QPEI nanoparticles into orthodontic cement provides long-lasting antibacterial activity against Streptococcus mutans without reducing the strength of adhesion to enamel, the degree of double bond conversion during the polymerisation, or the biocompatibility of the orthodontic cement.
PURPOSE: To evaluate the antibacterial, mechanical and biocompatibility characteristics of an orthodontic adhesive that contains quaternary ammonium polyethyleneimine (QPEI) nanoparticles. MATERIALS AND METHODS:QPEI nanoparticles were added to an orthodontic adhesive at 0%, 1% and 1.5% wt/wt. Antibacterial activity was tested after aging for 14 days using the direct contact test (DCT). The degree of monomer conversion (DC) was measured using Fourier transform infrared (FTIR) spectroscopy. Shear bond atrength (SBS) was tested on the etched enamel of extracted human teeth. Biocompatibility was tested using keratinocyte and neutrophil cell lines in the XTT assay. RESULTS: The DCT results showed significant bacterial growth inhibition in the test group incorporating 1.5% wt/wt QPEI nanoparticles (p < 0.05). The DC of the 0%, 1%, and 1.5% wt/wt samples measured immediately and after 10 min was 62.2-71.0%, 59.1-68.7%, and 52.9-58.6%, respectively, and the average SBS were 9.25 MPa, 11.57 MPa, and 9.10 MPa, respectively. Keratinocyte and neutrophil viability did not change following the addition of QPEI to the orthodontic adhesives. CONCLUSIONS: The incorporation of QPEI nanoparticles into orthodontic cement provides long-lasting antibacterial activity against Streptococcus mutans without reducing the strength of adhesion to enamel, the degree of double bond conversion during the polymerisation, or the biocompatibility of the orthodontic cement.
Authors: Elena Ferrando-Magraner; Carlos Bellot-Arcís; Vanessa Paredes-Gallardo; José Manuel Almerich-Silla; Verónica García-Sanz; Mercedes Fernández-Alonso; José María Montiel-Company Journal: Medicina (Kaunas) Date: 2020-01-29 Impact factor: 2.430