Literature DB >> 28608156

A study on the oil-based drilling cutting pyrolysis residue resource utilization by the exploration and development of shale gas.

Chao-Qiang Wang1,2,3, Ji-Zhong Jin2, Xiao-Yan Lin4,5, De-Ming Xiong2, Xu-Dong Mei2.   

Abstract

Based on the requirement of national energy conservation and environmental protection, attention has been given to building an environment-friendly and resource-saving society. Shale gas oil-based drilling cutting pyrolysis residues (ODPRs) have been used as the main research object to developing new technology which can convert the residues into a harmless and recyclable material. Using the test data of ODPR, we analyze the development prospect in the building material industry and provide a scheme to utilize this particular solid-waste efficiently. Theoretically speaking, the ODPR resource utilization such as admixture of cement, making sintered brick, and non-fired brick, by the exploration and development of Fuling shale gas is feasible.

Entities:  

Keywords:  Building materials; Feasibility; ODPR; Recycling; Shale gas

Mesh:

Substances:

Year:  2017        PMID: 28608156     DOI: 10.1007/s11356-017-9199-7

Source DB:  PubMed          Journal:  Environ Sci Pollut Res Int        ISSN: 0944-1344            Impact factor:   4.223


  6 in total

Review 1.  A review of the current options for the treatment and safe disposal of drill cuttings.

Authors:  Andrew S Ball; Richard J Stewart; Kirsten Schliephake
Journal:  Waste Manag Res       Date:  2011-11-09

2.  Investigation of 4-year-old stabilised/solidified and accelerated carbonated contaminated soil.

Authors:  A Antemir; C D Hills; P J Carey; M-C Magnié; A Polettini
Journal:  J Hazard Mater       Date:  2010-05-16       Impact factor: 10.588

3.  Influence of sintering temperature on the characteristics of shale brick containing oil well-derived drilling waste.

Authors:  Xiang-Guo Li; Yang Lv; Bao-Guo Ma; Shou-Wei Jian; Hong-Bo Tan
Journal:  Environ Sci Pollut Res Int       Date:  2011-05-24       Impact factor: 4.223

4.  Preparation and mechanism of the sintered bricks produced from Yellow River silt and red mud.

Authors:  Hongtao He; Qinyan Yue; Yuan Su; Baoyu Gao; Yue Gao; Jingzhou Wang; Hui Yu
Journal:  J Hazard Mater       Date:  2011-12-08       Impact factor: 10.588

5.  PAHs in leachates from thermal power plant wastes and ash-based construction materials.

Authors:  Natalya Irha; Janek Reinik; Jekaterina Jefimova; Arina Koroljova; Lembi-Merike Raado; Tiina Hain; Mai Uibu; Rein Kuusik
Journal:  Environ Sci Pollut Res Int       Date:  2015-04-14       Impact factor: 4.223

6.  Stabilization/solidification of petroleum drill cuttings: leaching studies.

Authors:  Sunday A Leonard; Julia A Stegemann
Journal:  J Hazard Mater       Date:  2009-09-20       Impact factor: 10.588

  6 in total
  2 in total

1.  Performance of desulfurization ash for the preparation of grouting fire prevention material.

Authors:  Xiang-Hua Feng; Chao-Qiang Wang; Shi-Min Ding
Journal:  Environ Sci Pollut Res Int       Date:  2019-05-08       Impact factor: 4.223

2.  Human carcinogenic risk analysis and utilization of shale gas water-based drilling cuttings in road materials.

Authors:  Chao-Qiang Wang; Shen Chen; De-Ming Huang; Qi-Cong Huang; Min-Jie Tu; Kai Wu; Yan-Yan Liu
Journal:  Environ Sci Pollut Res Int       Date:  2022-09-17       Impact factor: 5.190

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.