Ye Liang1, Canhua Jiang2, Limeng Wu3, Wenjin Wang3, Yonggang Liu4, Xinchun Jian5. 1. Surgeon-in-Charge, Department of Oral Maxillofacial Surgery, Xiangya Hospital, Central South University, Changsha, China. 2. Professor, Department Head, Department of Oral Maxillofacial Surgery, Xiangya Hospital, Central South University, Changsha, China. Electronic address: Canhua-j@sohu.com. 3. Resident, Department of Oral Maxillofacial Surgery, Xiangya Hospital, Central South University, Changsha, China. 4. Research Assistant, Xiangya Application Institute, Engineering Research Center of Hunan Province of Material Increasing Manufacturing, Changsha, China. 5. Professor, Department of Oral Maxillofacial Surgery, Xiangya Hospital, Central South University, Changsha, China.
Abstract
PURPOSE: To introduce and evaluate the clinical effects of digital surgical guide plate technology in the combined osteotomy and reconstruction pre-bent plate position (CORPPP) technique during mandibular segmental resections. MATERIALS AND METHODS: Seven cases of mandibular segmental resection with simultaneous vascularized free fibula flap reconstruction by oral and maxillofacial surgery were selected (Xiangya Hospital, Changsha, China; June 2015 through December 2015). Cone-beam computed tomographic (CBCT) and spiral CT scans of mandibles and fibular donor sites, respectively, were collected. Surgical simulations were conducted after data collection. Pre-bent titanium plates were placed within the predicted mandibular models. The samples were scanned by CBCT to obtain the positional relations. Then, CORPPP surgical guide plates with location holes were designed and fabricated on pre-bent titanium plates. The CORPPP surgical guide plates were applied in osteotomy and the placement of pre-bent titanium plates during surgery. CBCT scans were obtained 2 weeks after surgery to examine the reconstructed composite models composed of mandibles and titanium plates. Then, the scans were compared with the preoperatively designed models. In addition, the deviation of the integral and characteristic structure loci was analyzed. RESULT: The 7 cases with placed pre-bent titanium plates exhibited good recovery in occlusal relations and the contour of the reconstructed mandibles. The absolute deviations in the integral analysis were 0.89 ± 0.96 mm (mandibles) and 0.33 ± 0.36 mm (titanium plates). The absolute deviations on the diseased side were 1.78 ± 0.35 mm (condylar head), 2.43 ± 0.29 mm (gonion), 2.22 ± 0.22 mm (gnathion), and 2.66 ± 0.36 mm (mesial inferior margin of the fibula). CONCLUSION: The results of this study suggest that mandibular segmental resections and the precise orientation of pre-bent titanium plates could be simultaneously assisted by CORPPP digital surgical guide plates. The use of these guide plates should be expanded.
PURPOSE: To introduce and evaluate the clinical effects of digital surgical guide plate technology in the combined osteotomy and reconstruction pre-bent plate position (CORPPP) technique during mandibular segmental resections. MATERIALS AND METHODS: Seven cases of mandibular segmental resection with simultaneous vascularized free fibula flap reconstruction by oral and maxillofacial surgery were selected (Xiangya Hospital, Changsha, China; June 2015 through December 2015). Cone-beam computed tomographic (CBCT) and spiral CT scans of mandibles and fibular donor sites, respectively, were collected. Surgical simulations were conducted after data collection. Pre-bent titanium plates were placed within the predicted mandibular models. The samples were scanned by CBCT to obtain the positional relations. Then, CORPPP surgical guide plates with location holes were designed and fabricated on pre-bent titanium plates. The CORPPP surgical guide plates were applied in osteotomy and the placement of pre-bent titanium plates during surgery. CBCT scans were obtained 2 weeks after surgery to examine the reconstructed composite models composed of mandibles and titanium plates. Then, the scans were compared with the preoperatively designed models. In addition, the deviation of the integral and characteristic structure loci was analyzed. RESULT: The 7 cases with placed pre-bent titanium plates exhibited good recovery in occlusal relations and the contour of the reconstructed mandibles. The absolute deviations in the integral analysis were 0.89 ± 0.96 mm (mandibles) and 0.33 ± 0.36 mm (titanium plates). The absolute deviations on the diseased side were 1.78 ± 0.35 mm (condylar head), 2.43 ± 0.29 mm (gonion), 2.22 ± 0.22 mm (gnathion), and 2.66 ± 0.36 mm (mesial inferior margin of the fibula). CONCLUSION: The results of this study suggest that mandibular segmental resections and the precise orientation of pre-bent titanium plates could be simultaneously assisted by CORPPP digital surgical guide plates. The use of these guide plates should be expanded.