FIB based fabrication of an operative Pt/HfO2/TiN device for resistive switching inside a transmission electron microscope.

Recent advances in microelectromechanical systems (MEMS) based chips for in situ transmission electron microscopy are opening exciting new avenues in nanoscale research. The capability to perform current-voltage measurements while simultaneously analyzing the corresponding structural, chemical or even electronic structure changes during device operation would be a major breakthrough in the field of nanoelectronics. In this work we demonstrate for the first time how to electrically contact and operate a lamella cut from a resistive random access memory (RRAM) device based on a Pt/HfO2/TiN metal-insulator-metal (MIM) structure. The device was fabricated using a focused ion beam (FIB) instrument and an in situ lift-out system. The electrical switching characteristics of the electron-transparent lamella were comparable to a conventional reference device. The lamella structure was initially found to be in a low resistance state and could be reset progressively to higher resistance states by increasing the positive bias applied to the Pt anode. This could be followed up with unipolar set/reset operations where the current compliance during set was limited to 400 µA. FIB structures allowing to operate and at the same time characterize electronic devices will be an important tool to improve RRAM device performance based on a microstructural understanding of the switching mechanism.