Literature DB >> 28456921

Assessment of environmentally friendly fuel emissions from in-use vehicle exhaust: low-blend iso-stoichiometric GEM mixture as example.

Isaac Schifter1, Luis Díaz-Gutiérrez2, René Rodríguez-Lara2, Carmen González-Macías2, Uriel González-Macías2.   

Abstract

Gasoline-ethanol-methanol fuel blends were formulated with the same stoichiometric air-to-fuel ratio and volumetric energy concentration as any binary ethanol-gasoline blend. When the stoichiometric blends operated in a vehicle, the time period, injector voltage, and pressure for each fuel injection event in the engine corresponded to a given stoichiometric air-to-fuel ratio, and the load was essentially constant. Three low oxygen content iso-stoichiometric ternary gasoline-ethanol-methanol fuel blends were prepared, and the properties were compared with regular-type fuel without added oxygen. One of the ternary fuels was tested using a fleet of in-use vehicles for15 weeks and compared to neat gasoline without oxygenated compounds as a reference. Only a small number of publications have compared these ternary fuels in the same engine, and little data exist on the performance and emissions of in-use spark-ignition engines. The total hydrocarbon emissions observed was similar in both fuels, in addition to the calculated ozone forming potential of the tailpipe and evaporative emissions. In ozone non-attainment areas, the original purpose for oxygenate gasolines was to decrease carbon monoxide emissions. The results suggest that the strategy is less effective than expected because there still exist a great number of vehicles that have suffered the progressive deterioration of emissions and do not react to oxygenation, while new vehicles are equipped with sophisticated air/fuel control systems, and oxygenation does not improve combustion because the systems adjust the stoichiometric point, making it insensitive to the origin of the added excess oxygen (fuel or excess air). Graphical abstract Low level ternary blend of gasoline-ethanol-methanol were prepared with the same stoichiometric air-fuel ratio and volumetric energy concentration, based on the volumetric energy density of the pre-blended components. Exhaust and evaporative emissions was compared with a blend having no oxygen in a fleet of 12 in-use vehicles. Vehicles that had suffer a normal deterioration of emissions and do not react to oxygenation, and new vehicles with more sophisticated air/fuel control systems do not improve combustion.

Entities:  

Keywords:  Emissions; Ethanol–methanol–gasoline; Formulation; In-use vehicles; Low blends; Performance

Mesh:

Substances:

Year:  2017        PMID: 28456921     DOI: 10.1007/s10661-017-5959-6

Source DB:  PubMed          Journal:  Environ Monit Assess        ISSN: 0167-6369            Impact factor:   2.513


  4 in total

1.  High-mileage study of on-board diagnostic emissions.

Authors:  Ed Gardetto; Tandi Bagian; Jim Lindner
Journal:  J Air Waste Manag Assoc       Date:  2005-10       Impact factor: 2.235

2.  Assessment of Mexico's program to use ethanol as transportation fuel: impact of 6% ethanol-blended fuel on emissions of light-duty gasoline vehicles.

Authors:  Isaac Schifter; Luis Díaz; Rene Rodríguez; Lucia Salazar
Journal:  Environ Monit Assess       Date:  2010-03-13       Impact factor: 2.513

3.  Assessment of new vehicles emissions certification standards in the metropolitan area of Mexico City.

Authors:  I Schifter; L Díaz; E López-Salinas
Journal:  Environ Monit Assess       Date:  2006-03-28       Impact factor: 2.513

4.  The contribution of evaporative emissions from gasoline vehicles to the volatile organic compound inventory in Mexico City.

Authors:  I Schifter; L Díaz; R Rodríguez; C González-Macías
Journal:  Environ Monit Assess       Date:  2014-02-14       Impact factor: 2.513

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.