B H Drews1, A Seitz2, J Huth3, G Bauer3, A Ignatius2, L Dürselen2. 1. Department for Orthopedic Trauma, Hand and Reconstructive Surgery, Center of Surgery, University of Ulm, Albert-Einstein-Allee 23, 89081, Ulm, Germany. b.drews@me.com. 2. Trauma Research Center, Institute of Orthopedic Research and Biomechanics, University of Ulm-Medical Center, Helmholtzstraße 14, 89081, Ulm, Germany. 3. Sportklinik Stuttgart GmbH, Taubenheimstraße 8, 70734, Stuttgart, Germany.
Abstract
PURPOSE: Initial graft tension in anterior cruciate ligament (ACL) reconstruction affects stability and tension loss at follow-up. This study investigated the influence of hybrid tibial fixation in 3-tunnel double-bundle ACL reconstruction on initial graft tension and tension change and stability under anterior and combined rotatory loads. METHODS: Eleven fresh-frozen cadaveric knees were reconstructed with an ACL double bundle using a 3-tunnel technique. Grafts were tightened to 80 N in 60° (AM bundle) and 15° (PL bundle) of flexion. Anterior tibial translation under 134 N of anterior shear load and translation under combined rotatory and valgus loads (10 Nm valgus stress, 4 Nm internal tibial torque) were determined at 0°, 30°, 60°, and 90° flexion. In addition, graft tension under continuous passive motion was determined. Intact, ACL-resected and ACL-reconstructed joints with either tibial extracortical graft fixation or extracortical plus supplemental aperture graft fixation (hybrid fixation) were tested. RESULTS: Hybrid fixation did not increase graft tension in either bundle during fixation or in motion without additional load. AM-bundle tension increased (p < 0.05) at 0° under combined rotatory and valgus loads and at 30° and 60° under both loading conditions without decreasing the anterior tibial translation. PL-bundle tension increased (p < 0.05) only at 90° under combined rotatory and valgus loads. CONCLUSIONS: Tibial hybrid fixation in 3-tunnel double-bundle ACL reconstruction increases time-zero AM- and PL-bundle tensions under loading conditions, generating greater construct stiffness. This could lead to a longer preservation of ACL-graft stability in clinical follow-up before bony incorporation.
PURPOSE: Initial graft tension in anterior cruciate ligament (ACL) reconstruction affects stability and tension loss at follow-up. This study investigated the influence of hybrid tibial fixation in 3-tunnel double-bundle ACL reconstruction on initial graft tension and tension change and stability under anterior and combined rotatory loads. METHODS: Eleven fresh-frozen cadaveric knees were reconstructed with an ACL double bundle using a 3-tunnel technique. Grafts were tightened to 80 N in 60° (AM bundle) and 15° (PL bundle) of flexion. Anterior tibial translation under 134 N of anterior shear load and translation under combined rotatory and valgus loads (10 Nm valgus stress, 4 Nm internal tibial torque) were determined at 0°, 30°, 60°, and 90° flexion. In addition, graft tension under continuous passive motion was determined. Intact, ACL-resected and ACL-reconstructed joints with either tibial extracortical graft fixation or extracortical plus supplemental aperture graft fixation (hybrid fixation) were tested. RESULTS: Hybrid fixation did not increase graft tension in either bundle during fixation or in motion without additional load. AM-bundle tension increased (p < 0.05) at 0° under combined rotatory and valgus loads and at 30° and 60° under both loading conditions without decreasing the anterior tibial translation. PL-bundle tension increased (p < 0.05) only at 90° under combined rotatory and valgus loads. CONCLUSIONS: Tibial hybrid fixation in 3-tunnel double-bundle ACL reconstruction increases time-zero AM- and PL-bundle tensions under loading conditions, generating greater construct stiffness. This could lead to a longer preservation of ACL-graft stability in clinical follow-up before bony incorporation.