Literature DB >> 28415551

A biodegradable AZ91 magnesium alloy coated with a thin nanostructured hydroxyapatite for improving the corrosion resistance.

T M Mukhametkaliyev1, M A Surmeneva1, A Vladescu2, C M Cotrut3, M Braic4, M Dinu4, M D Vranceanu5, I Pana6, M Mueller7, R A Surmenev8.   

Abstract

The main aim of this study was to investigate the properties of an AZ91 alloy coated with nanostructured hydroxyapatite (HA) prepared by radio frequency (RF) magnetron sputtering. The bioactivity and biomineralization of the AZ91 magnesium alloy coated with HA were investigated in simulated body fluid (SBF) via an in vitro test. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) analyses were performed. The samples were immersed in SBF to study the ability of the surface to promote the formation of an apatite layer as well as corrosion resistance and mass change of the HA-coated AZ91 alloy. Electrochemical tests were performed to estimate the corrosion behaviour of HA-coated and uncoated samples. The results revealed the capability of the HA coating to significantly improve the corrosion resistance of the uncoated AZ91 alloy.
Copyright © 2017 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Biodegradable material; Corrosion resistance; Hydroxyapatite; Magnesium alloy; Magnetron sputtering

Mesh:

Substances:

Year:  2017        PMID: 28415551     DOI: 10.1016/j.msec.2017.02.033

Source DB:  PubMed          Journal:  Mater Sci Eng C Mater Biol Appl        ISSN: 0928-4931            Impact factor:   7.328


  5 in total

1.  Biocompatible hydrophilic brushite coatings on AZX310 and AM50 alloys for orthopaedic implants.

Authors:  Y Sasikumar; A Madhan Kumar; R Suresh Babu; Mohammad Mizanur Rahman; Leandro M Samyn; A L F de Barros
Journal:  J Mater Sci Mater Med       Date:  2018-07-21       Impact factor: 3.896

2.  Effect of Hydroxyapatite on the Mechanical Properties and Corrosion Behavior of Mg-Zn-Y Alloy.

Authors:  Chun Chiu; Chih-Te Lu; Shih-Hsun Chen; Keng-Liang Ou
Journal:  Materials (Basel)       Date:  2017-07-26       Impact factor: 3.623

3.  Hydrothermal Microwave-Assisted Fabrication of Nanohydroxyapatite Powder and Optimization of Its Nanocomposite Coatings on Magnesium Alloy for Orthopedic Applications.

Authors:  Fakiha El-Taib Heakal; Yahia B Sarhan; Maamoun A Maamoun; Amira M Bakry; Yasser K Abdel-Monem; Ibrahim M Ghayad
Journal:  ACS Omega       Date:  2021-12-23

4.  Degradation and biocompatibility of a series of strontium substituted hydroxyapatite coatings on magnesium alloys.

Authors:  Xuenan Gu; Wenting Lin; Dan Li; Hongmei Guo; Ping Li; Yubo Fan
Journal:  RSC Adv       Date:  2019-05-14       Impact factor: 4.036

5.  In vitro corrosion resistance of layer-by-layer assembled polyacrylic acid multilayers induced Ca-P coating on magnesium alloy AZ31.

Authors:  Lan-Yue Cui; Shen-Cong Cheng; Lu-Xian Liang; Jing-Chao Zhang; Shuo-Qi Li; Zhen-Lin Wang; Rong-Chang Zeng
Journal:  Bioact Mater       Date:  2020-02-10
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.