Literature DB >> 28415514

Synthesis and characterization of cycloaliphatic hydrophilic polyurethanes, modified with l-ascorbic acid, as materials for soft tissue regeneration.

J Kucinska-Lipka1, I Gubanska2, M Strankowski2, H Cieśliński3, N Filipowicz3, H Janik2.   

Abstract

In this paper we described synthesis and characteristic of obtained hydrophilic polyurethanes (PURs) modified with ascorbic acid (commonly known as vitamin C). Such materials may find an application in the biomedical field, for example in the regenerative medicine of soft tissues, according to ascorbic acid wide influence on tissue regeneration Flora (2009), Szymańska-Pasternak et al. (2011), Taikarimi and Ibrahim (2011), Myrvik and Volk (1954), Li et al. (2001), Cursino et al. (2005) . Hydrophilic PURs were obtained with the use of amorphous α,ω-dihydroxy(ethylene-butylene adipate) (dHEBA) polyol, 1,4-butanediol (BDO) chain extender and aliphatic 4,4'-methylenebis(cyclohexyl isocyanate) (HMDI). HMDI was chosen as a nontoxic diisocyanate, suitable for biomedical PUR synthesis. Modification with l-ascorbic acid (AA) was performed to improve obtained PUR materials biocompatibility. Chemical structure of obtained PURs was provided and confirmed by Fourier transform infrared spectroscopy (FTIR) and Proton nuclear magnetic resonance spectroscopy (1HNMR). Differential scanning calorimetry (DSC) was used to indicate the influence of ascorbic acid modification on such parameters as glass transition temperature, melting temperature and melting enthalpies of obtained materials. To determine how these materials may potentially behave, after implementation in tissue, degradation behavior of obtained PURs in various chemical environments, which were represented by canola oil, saline solution, distilled water and phosphate buffered saline (PBS) was estimated. The influence of AA on hydrophilic-hydrophobic character of obtained PURs was established by contact angle study. This experiment revealed that ascorbic acid significantly improves hydrophilicity of obtained PUR materials and the same cause that they are more suitable candidates for biomedical applications. Good hemocompatibility characteristic of studied PUR materials was confirmed by the hemocompatibility test with human blood. Microbiological tests were carried out to indicate the microbiological sensitivity of obtained PURs. Results of performed studies showed that obtained AA-modified PUR materials may find an application in soft tissue regeneration.
Copyright © 2017 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Chemical structure; Physicochemical properties; Polyurethane; Tissue regeneration; l-Ascorbic acid

Mesh:

Substances:

Year:  2017        PMID: 28415514     DOI: 10.1016/j.msec.2017.02.052

Source DB:  PubMed          Journal:  Mater Sci Eng C Mater Biol Appl        ISSN: 0928-4931            Impact factor:   7.328


  5 in total

1.  Biobased Polyurethane Composite Foams Reinforced with Plum Stones and Silanized Plum Stones.

Authors:  Karolina Miedzińska; Sylwia Członka; Anna Strąkowska; Krzysztof Strzelec
Journal:  Int J Mol Sci       Date:  2021-04-30       Impact factor: 5.923

2.  Morphology, Mechanical and Thermal Properties of Thermoplastic Polyurethane Containing Reduced Graphene Oxide and Graphene Nanoplatelets.

Authors:  Michał Strankowski; Piotr Korzeniewski; Justyna Strankowska; Anu A S; Sabu Thomas
Journal:  Materials (Basel)       Date:  2018-01-06       Impact factor: 3.623

3.  Polyurethanes Crosslinked with Poly(vinyl alcohol) as a Slowly-Degradable and Hydrophilic Materials of Potential Use in Regenerative Medicine.

Authors:  Justyna Kucińska-Lipka
Journal:  Materials (Basel)       Date:  2018-02-27       Impact factor: 3.623

Review 4.  Biobased polyurethanes for biomedical applications.

Authors:  Sophie Wendels; Luc Avérous
Journal:  Bioact Mater       Date:  2020-10-15

5.  Anatomically and Biomechanically Relevant Monolithic Total Disc Replacement Made of 3D-Printed Thermoplastic Polyurethane.

Authors:  Muhammad Hanif Nadhif; Muhammad Maulana Ghiffary; Muhammad Irsyad; Nuzli Fahdia Mazfufah; Fakhira Nurhaliza; Siti Fauziyah Rahman; Ahmad Jabir Rahyussalim; Tri Kurniawati
Journal:  Polymers (Basel)       Date:  2022-10-04       Impact factor: 4.967

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.