Literature DB >> 28383904

Real Time-NIR/MIR-Photorheology: A Versatile Tool for the in Situ Characterization of Photopolymerization Reactions.

Christian Gorsche1,2, Reghunathan Harikrishna1,2, Stefan Baudis1, Patrick Knaack1, Branislav Husar1, Joerg Laeuger3, Helmuth Hoffmann1, Robert Liska1,2.   

Abstract

In photopolymerization reactions, mostly multifunctional monomers are employed, as they ensure fast reaction times and good final mechanical properties of the cured materials. Drawing conclusions about the influence of the components and curing conditions on the mechanical properties of the subsequently formed insoluble networks is challenging. Therefore, an in situ observation of chemical and mechanical characteristics during the photopolymerization reaction is desired. By coupling of an infrared spectrometer with a photorheometer, a broad spectrum of different photopolymerizable formulations can be analyzed during the curing reaction. The rheological information (i.e., time to gelation, final modulus, shrinkage force) can be derived from a parallel plate rheometer equipped with a UV- and IR-translucent window (glass for NIR and CaF2 window for MIR). Chemical information (i.e., conversion at the gel point and final conversion) is gained by monitoring the decrease of the corresponding IR-peak for the reactive monomer unit (e.g., C═C double bond peak for (meth)acrylates, H-S thiol and C═C double bond peak in thiol-ene systems, C-O epoxy peak for epoxy resins). Depending on the relative concentration of reactive functional groups in the sample volume and the intensity of the IR signal, the conversion can be monitored in the near-infrared region (e.g., acrylate double bonds, epoxy groups) or the MIR region (e.g., thiol signal). Moreover, an integrated Peltier element and external heating hood enable the characterization of photopolymerization reactions at elevated temperatures, which also widens the window of application to resins that are waxy or solid at ambient conditions. By switching from water to heavy water, the chemical conversion during photopolymerization of hydrogel precursor formulations can also be examined. Moreover, this device could also represent an analytical tool for a variety of thermally and redox initiated systems.

Entities:  

Year:  2017        PMID: 28383904     DOI: 10.1021/acs.analchem.7b00272

Source DB:  PubMed          Journal:  Anal Chem        ISSN: 0003-2700            Impact factor:   6.986


  7 in total

1.  Gelatin methacryloyl as environment for chondrocytes and cell delivery to superficial cartilage defects.

Authors:  Katja Hölzl; Marian Fürsatz; Hakan Göcerler; Barbara Schädl; Sara Žigon-Branc; Marica Markovic; Claudia Gahleitner; Jasper Van Hoorick; Sandra Van Vlierberghe; Anne Kleiner; Stefan Baudis; Andreas Pauschitz; Heinz Redl; Aleksandr Ovsianikov; Sylvia Nürnberger
Journal:  J Tissue Eng Regen Med       Date:  2021-12-15       Impact factor: 4.323

2.  Metallo-Supramolecular Gels that are Photocleavable with Visible and Near-Infrared Irradiation.

Authors:  Sabrina Theis; Aitziber Iturmendi; Christian Gorsche; Marco Orthofer; Markus Lunzer; Stefan Baudis; Aleksandr Ovsianikov; Robert Liska; Uwe Monkowius; Ian Teasdale
Journal:  Angew Chem Int Ed Engl       Date:  2017-11-15       Impact factor: 15.336

3.  Silane-Acrylate Chemistry for Regulating Network Formation in Radical Photopolymerization.

Authors:  Johannes Steindl; Thomas Koch; Norbert Moszner; Christian Gorsche
Journal:  Macromolecules       Date:  2017-09-18       Impact factor: 5.985

4.  Dynamic Supramolecular Ruthenium-Based Gels Responsive to Visible/NIR Light and Heat.

Authors:  Ian Teasdale; Sabrina Theis; Aitziber Iturmendi; Moritz Strobel; Sabine Hild; Jaroslaw Jacak; Philipp Mayrhofer; Uwe Monkowius
Journal:  Chemistry       Date:  2019-07-03       Impact factor: 5.236

5.  Differentiation of physical and chemical cross-linking in gelatin methacryloyl hydrogels.

Authors:  Lisa Rebers; Raffael Reichsöllner; Sophia Regett; Günter E M Tovar; Kirsten Borchers; Stefan Baudis; Alexander Southan
Journal:  Sci Rep       Date:  2021-02-05       Impact factor: 4.379

6.  In situ investigation of the kinetics and microstructure during photopolymerization by positron annihilation technique and NIR-photorheology.

Authors:  Helena Švajdlenková; Ondrej Šauša; Gernot Peer; Christian Gorsche
Journal:  RSC Adv       Date:  2018-11-02       Impact factor: 4.036

7.  Printability Study of a Conductive Polyaniline/Acrylic Formulation for 3D Printing.

Authors:  Goretti Arias-Ferreiro; Ana Ares-Pernas; Aurora Lasagabáster-Latorre; Nora Aranburu; Gonzalo Guerrica-Echevarria; M Sonia Dopico-García; María-José Abad
Journal:  Polymers (Basel)       Date:  2021-06-23       Impact factor: 4.329

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.