| Literature DB >> 28382933 |
Gemma Torres-Sallan1,2, Rogier P O Schulte1,3, Gary J Lanigan1, Kenneth A Byrne2, Brian Reidy1, Iolanda Simó1, Johan Six4, Rachel E Creamer1,5.
Abstract
Soil plays a key role in the global carbon (C) cycle. Most current assessments of SOC stocks and the guidelines given by Intergovernmental Panel on Climate Change (IPCC) focus on the top 30 cm of soil. Our research shows that, when considering only total quantities, most of the SOC stocks are found in this top layer. However, not all forms of SOC are equally valuable as long-term stable stores of carbon: the majority of SOC is available for mineralisation and can potentially be re-emitted to the atmosphere. SOC associated with micro-aggregates and silt plus clay fractions is more stable and therefore represents a long-term carbon store. Our research shows that most of this stable carbon is located at depths below 30 cm (42% of subsoil SOC is located in microaggregates and silt and clay, compared to 16% in the topsoil), specifically in soils that are subject to clay illuviation. This has implications for land management decisions in temperate grassland regions, defining the trade-offs between primary productivity and C emissions in clay-illuviated soils, as a result of drainage. Therefore, climate smart land management should consider the balance between SOC stabilisation in topsoils for productivity versus sequestration in subsoils for climate mitigation.Entities:
Year: 2017 PMID: 28382933 PMCID: PMC5382536 DOI: 10.1038/srep45635
Source DB: PubMed Journal: Sci Rep ISSN: 2045-2322 Impact factor: 4.379
Figure 1Relative distribution of SOC within aggregates by depth.
The figure plots the aggregate size containing 50% of SOC on a logarithmic scale (x-axis). The y-axis is the soil depth (cm). The figure is divided in four quadrants: (A,B) (top) indicate the top 30 cm of all soil profiles, while quadrants (C,D), (bottom) indicate the subsoil. Quadrants (A,C) (left) correspond to the samples where more than 50% of SOC is located in silt plus clay and microaggregate fractions – indicating stability as C associated with smaller aggregates is more protected against mineralisation. Quadrants (B,D) (right) show the samples that reach 50% of SOC only when the macroaggregates or large macroaggregates are taken into account. Bubble size represents total SOC of the bulk sample at that depth. Colours indicate individual soil subgroups: HBE = Humic Brown Earth; TBC = Typical Brown Earth; SBE = Stagnic Brown Earth; TLu = Typical Luvisol; SLu = Stagnic Luvisol; TSWG = Typical Surface-water Gley.
Multiple linear regression of soil properties on ‘m’ across all sites and depths.
| Explanatory variables | Soil type used as the baseline in the backward regression | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TSWG | SLu | TLu | SBE | TBE | HBE | |||||||
| Intercept | 6.83 | 6.83 | 7.00 | 7.51 | 7.27 | 7.27 | ||||||
| Depth | −0.0244 | −0.0244 | −0.0271 | −0.0246 | −0.0195 | −0.0195 | ||||||
| TSWG | n.s. | n.s. | n.s. | n.s. | −0.652 | n.s. | n.s. | −0.0118 | n.s. | −0.0118 | ||
| SLu | n.s. | n.s. | n.s. | n.s. | −0.608 | n.s. | −0.586 | n.s. | −0.586 | n.s. | ||
| TLu | n.s. | n.s. | n.s. | n.s. | −0.728 | n.s. | n.s. | −0.0159 | n.s. | −0.0159 | ||
| SBE | 0.600 | n.s. | 0.600 | n.s. | 0.543 | n.s. | n.s. | n.s. | n.s. | n.s. | ||
| TBE | 0.676 | n.s. | 0.676 | n.s. | 0.608 | n.s. | n.s. | n.s. | n.s. | n.s. | ||
| HBE | 0.742 | n.s. | 0.742 | n.s. | n.s. | 0.0156 | n.s. | n.s. | n.s. | n.s. | ||
Coefficients noted “n.s.” were not significantly different from 0 (p < 0.05) and thus progressively removed from the model. The main effect of depth was significant for all soil types.
Figure 2Example of m value for two soils at depth.
The square (m) is the point of the fitted curve where 50% of the SOC is reached. Green dots represent the actual observations. The blue line is the fitted curve.